forked from luck/tmp_suning_uos_patched
2ffe2da3e7
ARMv6 and ARMv7 CPUs can perform speculative prefetching, which makes DMA cache coherency handling slightly more interesting. Rather than being able to rely upon the CPU not accessing the DMA buffer until DMA has completed, we now must expect that the cache could be loaded with possibly stale data from the DMA buffer. Where DMA involves data being transferred to the device, we clean the cache before handing it over for DMA, otherwise we invalidate the buffer to get rid of potential writebacks. On DMA Completion, if data was transferred from the device, we invalidate the buffer to get rid of any stale speculative prefetches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
314 lines
7.9 KiB
ArmAsm
314 lines
7.9 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/cache-v7.S
|
|
*
|
|
* Copyright (C) 2001 Deep Blue Solutions Ltd.
|
|
* Copyright (C) 2005 ARM Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This is the "shell" of the ARMv7 processor support.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/unwind.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* v7_flush_dcache_all()
|
|
*
|
|
* Flush the whole D-cache.
|
|
*
|
|
* Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
|
|
*
|
|
* - mm - mm_struct describing address space
|
|
*/
|
|
ENTRY(v7_flush_dcache_all)
|
|
dmb @ ensure ordering with previous memory accesses
|
|
mrc p15, 1, r0, c0, c0, 1 @ read clidr
|
|
ands r3, r0, #0x7000000 @ extract loc from clidr
|
|
mov r3, r3, lsr #23 @ left align loc bit field
|
|
beq finished @ if loc is 0, then no need to clean
|
|
mov r10, #0 @ start clean at cache level 0
|
|
loop1:
|
|
add r2, r10, r10, lsr #1 @ work out 3x current cache level
|
|
mov r1, r0, lsr r2 @ extract cache type bits from clidr
|
|
and r1, r1, #7 @ mask of the bits for current cache only
|
|
cmp r1, #2 @ see what cache we have at this level
|
|
blt skip @ skip if no cache, or just i-cache
|
|
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
|
|
isb @ isb to sych the new cssr&csidr
|
|
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
|
|
and r2, r1, #7 @ extract the length of the cache lines
|
|
add r2, r2, #4 @ add 4 (line length offset)
|
|
ldr r4, =0x3ff
|
|
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
|
|
clz r5, r4 @ find bit position of way size increment
|
|
ldr r7, =0x7fff
|
|
ands r7, r7, r1, lsr #13 @ extract max number of the index size
|
|
loop2:
|
|
mov r9, r4 @ create working copy of max way size
|
|
loop3:
|
|
ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
|
|
THUMB( lsl r6, r9, r5 )
|
|
THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
|
|
ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
|
|
THUMB( lsl r6, r7, r2 )
|
|
THUMB( orr r11, r11, r6 ) @ factor index number into r11
|
|
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
|
|
subs r9, r9, #1 @ decrement the way
|
|
bge loop3
|
|
subs r7, r7, #1 @ decrement the index
|
|
bge loop2
|
|
skip:
|
|
add r10, r10, #2 @ increment cache number
|
|
cmp r3, r10
|
|
bgt loop1
|
|
finished:
|
|
mov r10, #0 @ swith back to cache level 0
|
|
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
|
|
dsb
|
|
isb
|
|
mov pc, lr
|
|
ENDPROC(v7_flush_dcache_all)
|
|
|
|
/*
|
|
* v7_flush_cache_all()
|
|
*
|
|
* Flush the entire cache system.
|
|
* The data cache flush is now achieved using atomic clean / invalidates
|
|
* working outwards from L1 cache. This is done using Set/Way based cache
|
|
* maintainance instructions.
|
|
* The instruction cache can still be invalidated back to the point of
|
|
* unification in a single instruction.
|
|
*
|
|
*/
|
|
ENTRY(v7_flush_kern_cache_all)
|
|
ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} )
|
|
THUMB( stmfd sp!, {r4-r7, r9-r11, lr} )
|
|
bl v7_flush_dcache_all
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
|
|
ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} )
|
|
THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
|
|
mov pc, lr
|
|
ENDPROC(v7_flush_kern_cache_all)
|
|
|
|
/*
|
|
* v7_flush_cache_all()
|
|
*
|
|
* Flush all TLB entries in a particular address space
|
|
*
|
|
* - mm - mm_struct describing address space
|
|
*/
|
|
ENTRY(v7_flush_user_cache_all)
|
|
/*FALLTHROUGH*/
|
|
|
|
/*
|
|
* v7_flush_cache_range(start, end, flags)
|
|
*
|
|
* Flush a range of TLB entries in the specified address space.
|
|
*
|
|
* - start - start address (may not be aligned)
|
|
* - end - end address (exclusive, may not be aligned)
|
|
* - flags - vm_area_struct flags describing address space
|
|
*
|
|
* It is assumed that:
|
|
* - we have a VIPT cache.
|
|
*/
|
|
ENTRY(v7_flush_user_cache_range)
|
|
mov pc, lr
|
|
ENDPROC(v7_flush_user_cache_all)
|
|
ENDPROC(v7_flush_user_cache_range)
|
|
|
|
/*
|
|
* v7_coherent_kern_range(start,end)
|
|
*
|
|
* Ensure that the I and D caches are coherent within specified
|
|
* region. This is typically used when code has been written to
|
|
* a memory region, and will be executed.
|
|
*
|
|
* - start - virtual start address of region
|
|
* - end - virtual end address of region
|
|
*
|
|
* It is assumed that:
|
|
* - the Icache does not read data from the write buffer
|
|
*/
|
|
ENTRY(v7_coherent_kern_range)
|
|
/* FALLTHROUGH */
|
|
|
|
/*
|
|
* v7_coherent_user_range(start,end)
|
|
*
|
|
* Ensure that the I and D caches are coherent within specified
|
|
* region. This is typically used when code has been written to
|
|
* a memory region, and will be executed.
|
|
*
|
|
* - start - virtual start address of region
|
|
* - end - virtual end address of region
|
|
*
|
|
* It is assumed that:
|
|
* - the Icache does not read data from the write buffer
|
|
*/
|
|
ENTRY(v7_coherent_user_range)
|
|
UNWIND(.fnstart )
|
|
dcache_line_size r2, r3
|
|
sub r3, r2, #1
|
|
bic r0, r0, r3
|
|
1:
|
|
USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
|
|
dsb
|
|
USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
|
|
add r0, r0, r2
|
|
2:
|
|
cmp r0, r1
|
|
blo 1b
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
|
|
dsb
|
|
isb
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Fault handling for the cache operation above. If the virtual address in r0
|
|
* isn't mapped, just try the next page.
|
|
*/
|
|
9001:
|
|
mov r0, r0, lsr #12
|
|
mov r0, r0, lsl #12
|
|
add r0, r0, #4096
|
|
b 2b
|
|
UNWIND(.fnend )
|
|
ENDPROC(v7_coherent_kern_range)
|
|
ENDPROC(v7_coherent_user_range)
|
|
|
|
/*
|
|
* v7_flush_kern_dcache_area(void *addr, size_t size)
|
|
*
|
|
* Ensure that the data held in the page kaddr is written back
|
|
* to the page in question.
|
|
*
|
|
* - addr - kernel address
|
|
* - size - region size
|
|
*/
|
|
ENTRY(v7_flush_kern_dcache_area)
|
|
dcache_line_size r2, r3
|
|
add r1, r0, r1
|
|
1:
|
|
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line
|
|
add r0, r0, r2
|
|
cmp r0, r1
|
|
blo 1b
|
|
dsb
|
|
mov pc, lr
|
|
ENDPROC(v7_flush_kern_dcache_area)
|
|
|
|
/*
|
|
* v7_dma_inv_range(start,end)
|
|
*
|
|
* Invalidate the data cache within the specified region; we will
|
|
* be performing a DMA operation in this region and we want to
|
|
* purge old data in the cache.
|
|
*
|
|
* - start - virtual start address of region
|
|
* - end - virtual end address of region
|
|
*/
|
|
v7_dma_inv_range:
|
|
dcache_line_size r2, r3
|
|
sub r3, r2, #1
|
|
tst r0, r3
|
|
bic r0, r0, r3
|
|
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
|
|
|
|
tst r1, r3
|
|
bic r1, r1, r3
|
|
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D / U line
|
|
1:
|
|
mcr p15, 0, r0, c7, c6, 1 @ invalidate D / U line
|
|
add r0, r0, r2
|
|
cmp r0, r1
|
|
blo 1b
|
|
dsb
|
|
mov pc, lr
|
|
ENDPROC(v7_dma_inv_range)
|
|
|
|
/*
|
|
* v7_dma_clean_range(start,end)
|
|
* - start - virtual start address of region
|
|
* - end - virtual end address of region
|
|
*/
|
|
v7_dma_clean_range:
|
|
dcache_line_size r2, r3
|
|
sub r3, r2, #1
|
|
bic r0, r0, r3
|
|
1:
|
|
mcr p15, 0, r0, c7, c10, 1 @ clean D / U line
|
|
add r0, r0, r2
|
|
cmp r0, r1
|
|
blo 1b
|
|
dsb
|
|
mov pc, lr
|
|
ENDPROC(v7_dma_clean_range)
|
|
|
|
/*
|
|
* v7_dma_flush_range(start,end)
|
|
* - start - virtual start address of region
|
|
* - end - virtual end address of region
|
|
*/
|
|
ENTRY(v7_dma_flush_range)
|
|
dcache_line_size r2, r3
|
|
sub r3, r2, #1
|
|
bic r0, r0, r3
|
|
1:
|
|
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
|
|
add r0, r0, r2
|
|
cmp r0, r1
|
|
blo 1b
|
|
dsb
|
|
mov pc, lr
|
|
ENDPROC(v7_dma_flush_range)
|
|
|
|
/*
|
|
* dma_map_area(start, size, dir)
|
|
* - start - kernel virtual start address
|
|
* - size - size of region
|
|
* - dir - DMA direction
|
|
*/
|
|
ENTRY(v7_dma_map_area)
|
|
add r1, r1, r0
|
|
teq r2, #DMA_FROM_DEVICE
|
|
beq v7_dma_inv_range
|
|
b v7_dma_clean_range
|
|
ENDPROC(v7_dma_map_area)
|
|
|
|
/*
|
|
* dma_unmap_area(start, size, dir)
|
|
* - start - kernel virtual start address
|
|
* - size - size of region
|
|
* - dir - DMA direction
|
|
*/
|
|
ENTRY(v7_dma_unmap_area)
|
|
add r1, r1, r0
|
|
teq r2, #DMA_TO_DEVICE
|
|
bne v7_dma_inv_range
|
|
mov pc, lr
|
|
ENDPROC(v7_dma_unmap_area)
|
|
|
|
__INITDATA
|
|
|
|
.type v7_cache_fns, #object
|
|
ENTRY(v7_cache_fns)
|
|
.long v7_flush_kern_cache_all
|
|
.long v7_flush_user_cache_all
|
|
.long v7_flush_user_cache_range
|
|
.long v7_coherent_kern_range
|
|
.long v7_coherent_user_range
|
|
.long v7_flush_kern_dcache_area
|
|
.long v7_dma_map_area
|
|
.long v7_dma_unmap_area
|
|
.long v7_dma_flush_range
|
|
.size v7_cache_fns, . - v7_cache_fns
|