forked from luck/tmp_suning_uos_patched
b312c33e36
This means "DMA Read returns" can bypass "MMIO Writes". Violating the PCI specs in this case improves outbound DMA "flows" and is currently not required by any drivers. This is NOT a new behavior. Previous chipsets did this already and I believe ZX1 PDC was already setting this for hpux. I just want to further document the behavior. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2263 lines
63 KiB
C
2263 lines
63 KiB
C
/*
|
|
** System Bus Adapter (SBA) I/O MMU manager
|
|
**
|
|
** (c) Copyright 2000-2004 Grant Grundler <grundler @ parisc-linux x org>
|
|
** (c) Copyright 2004 Naresh Kumar Inna <knaresh at india x hp x com>
|
|
** (c) Copyright 2000-2004 Hewlett-Packard Company
|
|
**
|
|
** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
|
|
**
|
|
** This program is free software; you can redistribute it and/or modify
|
|
** it under the terms of the GNU General Public License as published by
|
|
** the Free Software Foundation; either version 2 of the License, or
|
|
** (at your option) any later version.
|
|
**
|
|
**
|
|
** This module initializes the IOC (I/O Controller) found on B1000/C3000/
|
|
** J5000/J7000/N-class/L-class machines and their successors.
|
|
**
|
|
** FIXME: add DMA hint support programming in both sba and lba modules.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/mm.h>
|
|
#include <linux/string.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h> /* for DMA_CHUNK_SIZE */
|
|
|
|
#include <asm/hardware.h> /* for register_parisc_driver() stuff */
|
|
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <asm/runway.h> /* for proc_runway_root */
|
|
#include <asm/pdc.h> /* for PDC_MODEL_* */
|
|
#include <asm/pdcpat.h> /* for is_pdc_pat() */
|
|
#include <asm/parisc-device.h>
|
|
|
|
|
|
/* declared in arch/parisc/kernel/setup.c */
|
|
extern struct proc_dir_entry * proc_mckinley_root;
|
|
|
|
#define MODULE_NAME "SBA"
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
/* depends on proc fs support. But costs CPU performance */
|
|
#undef SBA_COLLECT_STATS
|
|
#endif
|
|
|
|
/*
|
|
** The number of debug flags is a clue - this code is fragile.
|
|
** Don't even think about messing with it unless you have
|
|
** plenty of 710's to sacrifice to the computer gods. :^)
|
|
*/
|
|
#undef DEBUG_SBA_INIT
|
|
#undef DEBUG_SBA_RUN
|
|
#undef DEBUG_SBA_RUN_SG
|
|
#undef DEBUG_SBA_RESOURCE
|
|
#undef ASSERT_PDIR_SANITY
|
|
#undef DEBUG_LARGE_SG_ENTRIES
|
|
#undef DEBUG_DMB_TRAP
|
|
|
|
#ifdef DEBUG_SBA_INIT
|
|
#define DBG_INIT(x...) printk(x)
|
|
#else
|
|
#define DBG_INIT(x...)
|
|
#endif
|
|
|
|
#ifdef DEBUG_SBA_RUN
|
|
#define DBG_RUN(x...) printk(x)
|
|
#else
|
|
#define DBG_RUN(x...)
|
|
#endif
|
|
|
|
#ifdef DEBUG_SBA_RUN_SG
|
|
#define DBG_RUN_SG(x...) printk(x)
|
|
#else
|
|
#define DBG_RUN_SG(x...)
|
|
#endif
|
|
|
|
|
|
#ifdef DEBUG_SBA_RESOURCE
|
|
#define DBG_RES(x...) printk(x)
|
|
#else
|
|
#define DBG_RES(x...)
|
|
#endif
|
|
|
|
#if defined(CONFIG_64BIT)
|
|
/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
|
|
#define ZX1_SUPPORT
|
|
#endif
|
|
|
|
#define SBA_INLINE __inline__
|
|
|
|
|
|
/*
|
|
** The number of pdir entries to "free" before issueing
|
|
** a read to PCOM register to flush out PCOM writes.
|
|
** Interacts with allocation granularity (ie 4 or 8 entries
|
|
** allocated and free'd/purged at a time might make this
|
|
** less interesting).
|
|
*/
|
|
#define DELAYED_RESOURCE_CNT 16
|
|
|
|
#define DEFAULT_DMA_HINT_REG 0
|
|
|
|
#define ASTRO_RUNWAY_PORT 0x582
|
|
#define IKE_MERCED_PORT 0x803
|
|
#define REO_MERCED_PORT 0x804
|
|
#define REOG_MERCED_PORT 0x805
|
|
#define PLUTO_MCKINLEY_PORT 0x880
|
|
|
|
#define SBA_FUNC_ID 0x0000 /* function id */
|
|
#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
|
|
|
|
#define IS_ASTRO(id) ((id)->hversion == ASTRO_RUNWAY_PORT)
|
|
#define IS_IKE(id) ((id)->hversion == IKE_MERCED_PORT)
|
|
#define IS_PLUTO(id) ((id)->hversion == PLUTO_MCKINLEY_PORT)
|
|
|
|
#define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */
|
|
|
|
#define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE)
|
|
#define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE)
|
|
/* Ike's IOC's occupy functions 2 and 3 */
|
|
#define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE)
|
|
|
|
#define IOC_CTRL 0x8 /* IOC_CTRL offset */
|
|
#define IOC_CTRL_TC (1 << 0) /* TOC Enable */
|
|
#define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */
|
|
#define IOC_CTRL_DE (1 << 2) /* Dillon Enable */
|
|
#define IOC_CTRL_RM (1 << 8) /* Real Mode */
|
|
#define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */
|
|
#define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */
|
|
#define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */
|
|
|
|
#define MAX_IOC 2 /* per Ike. Pluto/Astro only have 1. */
|
|
|
|
#define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */
|
|
|
|
|
|
/*
|
|
** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
|
|
** Firmware programs this stuff. Don't touch it.
|
|
*/
|
|
#define LMMIO_DIRECT0_BASE 0x300
|
|
#define LMMIO_DIRECT0_MASK 0x308
|
|
#define LMMIO_DIRECT0_ROUTE 0x310
|
|
|
|
#define LMMIO_DIST_BASE 0x360
|
|
#define LMMIO_DIST_MASK 0x368
|
|
#define LMMIO_DIST_ROUTE 0x370
|
|
|
|
#define IOS_DIST_BASE 0x390
|
|
#define IOS_DIST_MASK 0x398
|
|
#define IOS_DIST_ROUTE 0x3A0
|
|
|
|
#define IOS_DIRECT_BASE 0x3C0
|
|
#define IOS_DIRECT_MASK 0x3C8
|
|
#define IOS_DIRECT_ROUTE 0x3D0
|
|
|
|
/*
|
|
** Offsets into I/O TLB (Function 2 and 3 on Ike)
|
|
*/
|
|
#define ROPE0_CTL 0x200 /* "regbus pci0" */
|
|
#define ROPE1_CTL 0x208
|
|
#define ROPE2_CTL 0x210
|
|
#define ROPE3_CTL 0x218
|
|
#define ROPE4_CTL 0x220
|
|
#define ROPE5_CTL 0x228
|
|
#define ROPE6_CTL 0x230
|
|
#define ROPE7_CTL 0x238
|
|
|
|
#define IOC_ROPE0_CFG 0x500 /* pluto only */
|
|
#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
|
|
|
|
|
|
|
|
#define HF_ENABLE 0x40
|
|
|
|
|
|
#define IOC_IBASE 0x300 /* IO TLB */
|
|
#define IOC_IMASK 0x308
|
|
#define IOC_PCOM 0x310
|
|
#define IOC_TCNFG 0x318
|
|
#define IOC_PDIR_BASE 0x320
|
|
|
|
/* AGP GART driver looks for this */
|
|
#define SBA_IOMMU_COOKIE 0x0000badbadc0ffeeUL
|
|
|
|
|
|
/*
|
|
** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
|
|
** It's safer (avoid memory corruption) to keep DMA page mappings
|
|
** equivalently sized to VM PAGE_SIZE.
|
|
**
|
|
** We really can't avoid generating a new mapping for each
|
|
** page since the Virtual Coherence Index has to be generated
|
|
** and updated for each page.
|
|
**
|
|
** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
|
|
*/
|
|
#define IOVP_SIZE PAGE_SIZE
|
|
#define IOVP_SHIFT PAGE_SHIFT
|
|
#define IOVP_MASK PAGE_MASK
|
|
|
|
#define SBA_PERF_CFG 0x708 /* Performance Counter stuff */
|
|
#define SBA_PERF_MASK1 0x718
|
|
#define SBA_PERF_MASK2 0x730
|
|
|
|
|
|
/*
|
|
** Offsets into PCI Performance Counters (functions 12 and 13)
|
|
** Controlled by PERF registers in function 2 & 3 respectively.
|
|
*/
|
|
#define SBA_PERF_CNT1 0x200
|
|
#define SBA_PERF_CNT2 0x208
|
|
#define SBA_PERF_CNT3 0x210
|
|
|
|
|
|
struct ioc {
|
|
void __iomem *ioc_hpa; /* I/O MMU base address */
|
|
char *res_map; /* resource map, bit == pdir entry */
|
|
u64 *pdir_base; /* physical base address */
|
|
unsigned long ibase; /* pdir IOV Space base - shared w/lba_pci */
|
|
unsigned long imask; /* pdir IOV Space mask - shared w/lba_pci */
|
|
#ifdef ZX1_SUPPORT
|
|
unsigned long iovp_mask; /* help convert IOVA to IOVP */
|
|
#endif
|
|
unsigned long *res_hint; /* next avail IOVP - circular search */
|
|
spinlock_t res_lock;
|
|
unsigned int res_bitshift; /* from the LEFT! */
|
|
unsigned int res_size; /* size of resource map in bytes */
|
|
#ifdef SBA_HINT_SUPPORT
|
|
/* FIXME : DMA HINTs not used */
|
|
unsigned long hint_mask_pdir; /* bits used for DMA hints */
|
|
unsigned int hint_shift_pdir;
|
|
#endif
|
|
#if DELAYED_RESOURCE_CNT > 0
|
|
int saved_cnt;
|
|
struct sba_dma_pair {
|
|
dma_addr_t iova;
|
|
size_t size;
|
|
} saved[DELAYED_RESOURCE_CNT];
|
|
#endif
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
#define SBA_SEARCH_SAMPLE 0x100
|
|
unsigned long avg_search[SBA_SEARCH_SAMPLE];
|
|
unsigned long avg_idx; /* current index into avg_search */
|
|
unsigned long used_pages;
|
|
unsigned long msingle_calls;
|
|
unsigned long msingle_pages;
|
|
unsigned long msg_calls;
|
|
unsigned long msg_pages;
|
|
unsigned long usingle_calls;
|
|
unsigned long usingle_pages;
|
|
unsigned long usg_calls;
|
|
unsigned long usg_pages;
|
|
#endif
|
|
|
|
/* STUFF We don't need in performance path */
|
|
unsigned int pdir_size; /* in bytes, determined by IOV Space size */
|
|
};
|
|
|
|
struct sba_device {
|
|
struct sba_device *next; /* list of SBA's in system */
|
|
struct parisc_device *dev; /* dev found in bus walk */
|
|
struct parisc_device_id *iodc; /* data about dev from firmware */
|
|
const char *name;
|
|
void __iomem *sba_hpa; /* base address */
|
|
spinlock_t sba_lock;
|
|
unsigned int flags; /* state/functionality enabled */
|
|
unsigned int hw_rev; /* HW revision of chip */
|
|
|
|
struct resource chip_resv; /* MMIO reserved for chip */
|
|
struct resource iommu_resv; /* MMIO reserved for iommu */
|
|
|
|
unsigned int num_ioc; /* number of on-board IOC's */
|
|
struct ioc ioc[MAX_IOC];
|
|
};
|
|
|
|
|
|
static struct sba_device *sba_list;
|
|
|
|
static unsigned long ioc_needs_fdc = 0;
|
|
|
|
/* global count of IOMMUs in the system */
|
|
static unsigned int global_ioc_cnt = 0;
|
|
|
|
/* PA8700 (Piranha 2.2) bug workaround */
|
|
static unsigned long piranha_bad_128k = 0;
|
|
|
|
/* Looks nice and keeps the compiler happy */
|
|
#define SBA_DEV(d) ((struct sba_device *) (d))
|
|
|
|
#ifdef SBA_AGP_SUPPORT
|
|
static int reserve_sba_gart = 1;
|
|
#endif
|
|
|
|
#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
|
|
|
|
|
|
/************************************
|
|
** SBA register read and write support
|
|
**
|
|
** BE WARNED: register writes are posted.
|
|
** (ie follow writes which must reach HW with a read)
|
|
**
|
|
** Superdome (in particular, REO) allows only 64-bit CSR accesses.
|
|
*/
|
|
#define READ_REG32(addr) le32_to_cpu(__raw_readl(addr))
|
|
#define READ_REG64(addr) le64_to_cpu(__raw_readq(addr))
|
|
#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
|
|
#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
|
|
|
|
#ifdef CONFIG_64BIT
|
|
#define READ_REG(addr) READ_REG64(addr)
|
|
#define WRITE_REG(value, addr) WRITE_REG64(value, addr)
|
|
#else
|
|
#define READ_REG(addr) READ_REG32(addr)
|
|
#define WRITE_REG(value, addr) WRITE_REG32(value, addr)
|
|
#endif
|
|
|
|
#ifdef DEBUG_SBA_INIT
|
|
|
|
/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */
|
|
|
|
/**
|
|
* sba_dump_ranges - debugging only - print ranges assigned to this IOA
|
|
* @hpa: base address of the sba
|
|
*
|
|
* Print the MMIO and IO Port address ranges forwarded by an Astro/Ike/RIO
|
|
* IO Adapter (aka Bus Converter).
|
|
*/
|
|
static void
|
|
sba_dump_ranges(void __iomem *hpa)
|
|
{
|
|
DBG_INIT("SBA at 0x%p\n", hpa);
|
|
DBG_INIT("IOS_DIST_BASE : %Lx\n", READ_REG64(hpa+IOS_DIST_BASE));
|
|
DBG_INIT("IOS_DIST_MASK : %Lx\n", READ_REG64(hpa+IOS_DIST_MASK));
|
|
DBG_INIT("IOS_DIST_ROUTE : %Lx\n", READ_REG64(hpa+IOS_DIST_ROUTE));
|
|
DBG_INIT("\n");
|
|
DBG_INIT("IOS_DIRECT_BASE : %Lx\n", READ_REG64(hpa+IOS_DIRECT_BASE));
|
|
DBG_INIT("IOS_DIRECT_MASK : %Lx\n", READ_REG64(hpa+IOS_DIRECT_MASK));
|
|
DBG_INIT("IOS_DIRECT_ROUTE: %Lx\n", READ_REG64(hpa+IOS_DIRECT_ROUTE));
|
|
}
|
|
|
|
/**
|
|
* sba_dump_tlb - debugging only - print IOMMU operating parameters
|
|
* @hpa: base address of the IOMMU
|
|
*
|
|
* Print the size/location of the IO MMU PDIR.
|
|
*/
|
|
static void sba_dump_tlb(void __iomem *hpa)
|
|
{
|
|
DBG_INIT("IO TLB at 0x%p\n", hpa);
|
|
DBG_INIT("IOC_IBASE : 0x%Lx\n", READ_REG64(hpa+IOC_IBASE));
|
|
DBG_INIT("IOC_IMASK : 0x%Lx\n", READ_REG64(hpa+IOC_IMASK));
|
|
DBG_INIT("IOC_TCNFG : 0x%Lx\n", READ_REG64(hpa+IOC_TCNFG));
|
|
DBG_INIT("IOC_PDIR_BASE: 0x%Lx\n", READ_REG64(hpa+IOC_PDIR_BASE));
|
|
DBG_INIT("\n");
|
|
}
|
|
#else
|
|
#define sba_dump_ranges(x)
|
|
#define sba_dump_tlb(x)
|
|
#endif /* DEBUG_SBA_INIT */
|
|
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
|
|
/**
|
|
* sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @msg: text to print ont the output line.
|
|
* @pide: pdir index.
|
|
*
|
|
* Print one entry of the IO MMU PDIR in human readable form.
|
|
*/
|
|
static void
|
|
sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
|
|
{
|
|
/* start printing from lowest pde in rval */
|
|
u64 *ptr = &(ioc->pdir_base[pide & (~0U * BITS_PER_LONG)]);
|
|
unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
|
|
uint rcnt;
|
|
|
|
printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
|
|
msg,
|
|
rptr, pide & (BITS_PER_LONG - 1), *rptr);
|
|
|
|
rcnt = 0;
|
|
while (rcnt < BITS_PER_LONG) {
|
|
printk(KERN_DEBUG "%s %2d %p %016Lx\n",
|
|
(rcnt == (pide & (BITS_PER_LONG - 1)))
|
|
? " -->" : " ",
|
|
rcnt, ptr, *ptr );
|
|
rcnt++;
|
|
ptr++;
|
|
}
|
|
printk(KERN_DEBUG "%s", msg);
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_check_pdir - debugging only - consistency checker
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @msg: text to print ont the output line.
|
|
*
|
|
* Verify the resource map and pdir state is consistent
|
|
*/
|
|
static int
|
|
sba_check_pdir(struct ioc *ioc, char *msg)
|
|
{
|
|
u32 *rptr_end = (u32 *) &(ioc->res_map[ioc->res_size]);
|
|
u32 *rptr = (u32 *) ioc->res_map; /* resource map ptr */
|
|
u64 *pptr = ioc->pdir_base; /* pdir ptr */
|
|
uint pide = 0;
|
|
|
|
while (rptr < rptr_end) {
|
|
u32 rval = *rptr;
|
|
int rcnt = 32; /* number of bits we might check */
|
|
|
|
while (rcnt) {
|
|
/* Get last byte and highest bit from that */
|
|
u32 pde = ((u32) (((char *)pptr)[7])) << 24;
|
|
if ((rval ^ pde) & 0x80000000)
|
|
{
|
|
/*
|
|
** BUMMER! -- res_map != pdir --
|
|
** Dump rval and matching pdir entries
|
|
*/
|
|
sba_dump_pdir_entry(ioc, msg, pide);
|
|
return(1);
|
|
}
|
|
rcnt--;
|
|
rval <<= 1; /* try the next bit */
|
|
pptr++;
|
|
pide++;
|
|
}
|
|
rptr++; /* look at next word of res_map */
|
|
}
|
|
/* It'd be nice if we always got here :^) */
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_dump_sg - debugging only - print Scatter-Gather list
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @startsg: head of the SG list
|
|
* @nents: number of entries in SG list
|
|
*
|
|
* print the SG list so we can verify it's correct by hand.
|
|
*/
|
|
static void
|
|
sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
|
|
{
|
|
while (nents-- > 0) {
|
|
printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n",
|
|
nents,
|
|
(unsigned long) sg_dma_address(startsg),
|
|
sg_dma_len(startsg),
|
|
sg_virt_addr(startsg), startsg->length);
|
|
startsg++;
|
|
}
|
|
}
|
|
|
|
#endif /* ASSERT_PDIR_SANITY */
|
|
|
|
|
|
|
|
|
|
/**************************************************************
|
|
*
|
|
* I/O Pdir Resource Management
|
|
*
|
|
* Bits set in the resource map are in use.
|
|
* Each bit can represent a number of pages.
|
|
* LSbs represent lower addresses (IOVA's).
|
|
*
|
|
***************************************************************/
|
|
#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */
|
|
|
|
/* Convert from IOVP to IOVA and vice versa. */
|
|
|
|
#ifdef ZX1_SUPPORT
|
|
/* Pluto (aka ZX1) boxes need to set or clear the ibase bits appropriately */
|
|
#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset))
|
|
#define SBA_IOVP(ioc,iova) ((iova) & (ioc)->iovp_mask)
|
|
#else
|
|
/* only support Astro and ancestors. Saves a few cycles in key places */
|
|
#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((iovp) | (offset))
|
|
#define SBA_IOVP(ioc,iova) (iova)
|
|
#endif
|
|
|
|
#define PDIR_INDEX(iovp) ((iovp)>>IOVP_SHIFT)
|
|
|
|
#define RESMAP_MASK(n) (~0UL << (BITS_PER_LONG - (n)))
|
|
#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
|
|
|
|
|
|
/**
|
|
* sba_search_bitmap - find free space in IO PDIR resource bitmap
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @bits_wanted: number of entries we need.
|
|
*
|
|
* Find consecutive free bits in resource bitmap.
|
|
* Each bit represents one entry in the IO Pdir.
|
|
* Cool perf optimization: search for log2(size) bits at a time.
|
|
*/
|
|
static SBA_INLINE unsigned long
|
|
sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
|
|
{
|
|
unsigned long *res_ptr = ioc->res_hint;
|
|
unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
|
|
unsigned long pide = ~0UL;
|
|
|
|
if (bits_wanted > (BITS_PER_LONG/2)) {
|
|
/* Search word at a time - no mask needed */
|
|
for(; res_ptr < res_end; ++res_ptr) {
|
|
if (*res_ptr == 0) {
|
|
*res_ptr = RESMAP_MASK(bits_wanted);
|
|
pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
|
|
pide <<= 3; /* convert to bit address */
|
|
break;
|
|
}
|
|
}
|
|
/* point to the next word on next pass */
|
|
res_ptr++;
|
|
ioc->res_bitshift = 0;
|
|
} else {
|
|
/*
|
|
** Search the resource bit map on well-aligned values.
|
|
** "o" is the alignment.
|
|
** We need the alignment to invalidate I/O TLB using
|
|
** SBA HW features in the unmap path.
|
|
*/
|
|
unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
|
|
uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
|
|
unsigned long mask;
|
|
|
|
if (bitshiftcnt >= BITS_PER_LONG) {
|
|
bitshiftcnt = 0;
|
|
res_ptr++;
|
|
}
|
|
mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt;
|
|
|
|
DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
|
|
while(res_ptr < res_end)
|
|
{
|
|
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
|
|
WARN_ON(mask == 0);
|
|
if(((*res_ptr) & mask) == 0) {
|
|
*res_ptr |= mask; /* mark resources busy! */
|
|
pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
|
|
pide <<= 3; /* convert to bit address */
|
|
pide += bitshiftcnt;
|
|
break;
|
|
}
|
|
mask >>= o;
|
|
bitshiftcnt += o;
|
|
if (mask == 0) {
|
|
mask = RESMAP_MASK(bits_wanted);
|
|
bitshiftcnt=0;
|
|
res_ptr++;
|
|
}
|
|
}
|
|
/* look in the same word on the next pass */
|
|
ioc->res_bitshift = bitshiftcnt + bits_wanted;
|
|
}
|
|
|
|
/* wrapped ? */
|
|
if (res_end <= res_ptr) {
|
|
ioc->res_hint = (unsigned long *) ioc->res_map;
|
|
ioc->res_bitshift = 0;
|
|
} else {
|
|
ioc->res_hint = res_ptr;
|
|
}
|
|
return (pide);
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @size: number of bytes to create a mapping for
|
|
*
|
|
* Given a size, find consecutive unmarked and then mark those bits in the
|
|
* resource bit map.
|
|
*/
|
|
static int
|
|
sba_alloc_range(struct ioc *ioc, size_t size)
|
|
{
|
|
unsigned int pages_needed = size >> IOVP_SHIFT;
|
|
#ifdef SBA_COLLECT_STATS
|
|
unsigned long cr_start = mfctl(16);
|
|
#endif
|
|
unsigned long pide;
|
|
|
|
pide = sba_search_bitmap(ioc, pages_needed);
|
|
if (pide >= (ioc->res_size << 3)) {
|
|
pide = sba_search_bitmap(ioc, pages_needed);
|
|
if (pide >= (ioc->res_size << 3))
|
|
panic("%s: I/O MMU @ %p is out of mapping resources\n",
|
|
__FILE__, ioc->ioc_hpa);
|
|
}
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
/* verify the first enable bit is clear */
|
|
if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
|
|
sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
|
|
}
|
|
#endif
|
|
|
|
DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
|
|
__FUNCTION__, size, pages_needed, pide,
|
|
(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
|
|
ioc->res_bitshift );
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
{
|
|
unsigned long cr_end = mfctl(16);
|
|
unsigned long tmp = cr_end - cr_start;
|
|
/* check for roll over */
|
|
cr_start = (cr_end < cr_start) ? -(tmp) : (tmp);
|
|
}
|
|
ioc->avg_search[ioc->avg_idx++] = cr_start;
|
|
ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
|
|
|
|
ioc->used_pages += pages_needed;
|
|
#endif
|
|
|
|
return (pide);
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_free_range - unmark bits in IO PDIR resource bitmap
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @iova: IO virtual address which was previously allocated.
|
|
* @size: number of bytes to create a mapping for
|
|
*
|
|
* clear bits in the ioc's resource map
|
|
*/
|
|
static SBA_INLINE void
|
|
sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
|
|
{
|
|
unsigned long iovp = SBA_IOVP(ioc, iova);
|
|
unsigned int pide = PDIR_INDEX(iovp);
|
|
unsigned int ridx = pide >> 3; /* convert bit to byte address */
|
|
unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
|
|
|
|
int bits_not_wanted = size >> IOVP_SHIFT;
|
|
|
|
/* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
|
|
unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1));
|
|
|
|
DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
|
|
__FUNCTION__, (uint) iova, size,
|
|
bits_not_wanted, m, pide, res_ptr, *res_ptr);
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
ioc->used_pages -= bits_not_wanted;
|
|
#endif
|
|
|
|
*res_ptr &= ~m;
|
|
}
|
|
|
|
|
|
/**************************************************************
|
|
*
|
|
* "Dynamic DMA Mapping" support (aka "Coherent I/O")
|
|
*
|
|
***************************************************************/
|
|
|
|
#ifdef SBA_HINT_SUPPORT
|
|
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
|
|
#endif
|
|
|
|
typedef unsigned long space_t;
|
|
#define KERNEL_SPACE 0
|
|
|
|
/**
|
|
* sba_io_pdir_entry - fill in one IO PDIR entry
|
|
* @pdir_ptr: pointer to IO PDIR entry
|
|
* @sid: process Space ID - currently only support KERNEL_SPACE
|
|
* @vba: Virtual CPU address of buffer to map
|
|
* @hint: DMA hint set to use for this mapping
|
|
*
|
|
* SBA Mapping Routine
|
|
*
|
|
* Given a virtual address (vba, arg2) and space id, (sid, arg1)
|
|
* sba_io_pdir_entry() loads the I/O PDIR entry pointed to by
|
|
* pdir_ptr (arg0).
|
|
* Using the bass-ackwards HP bit numbering, Each IO Pdir entry
|
|
* for Astro/Ike looks like:
|
|
*
|
|
*
|
|
* 0 19 51 55 63
|
|
* +-+---------------------+----------------------------------+----+--------+
|
|
* |V| U | PPN[43:12] | U | VI |
|
|
* +-+---------------------+----------------------------------+----+--------+
|
|
*
|
|
* Pluto is basically identical, supports fewer physical address bits:
|
|
*
|
|
* 0 23 51 55 63
|
|
* +-+------------------------+-------------------------------+----+--------+
|
|
* |V| U | PPN[39:12] | U | VI |
|
|
* +-+------------------------+-------------------------------+----+--------+
|
|
*
|
|
* V == Valid Bit (Most Significant Bit is bit 0)
|
|
* U == Unused
|
|
* PPN == Physical Page Number
|
|
* VI == Virtual Index (aka Coherent Index)
|
|
*
|
|
* LPA instruction output is put into PPN field.
|
|
* LCI (Load Coherence Index) instruction provides the "VI" bits.
|
|
*
|
|
* We pre-swap the bytes since PCX-W is Big Endian and the
|
|
* IOMMU uses little endian for the pdir.
|
|
*/
|
|
|
|
void SBA_INLINE
|
|
sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
|
|
unsigned long hint)
|
|
{
|
|
u64 pa; /* physical address */
|
|
register unsigned ci; /* coherent index */
|
|
|
|
pa = virt_to_phys(vba);
|
|
pa &= IOVP_MASK;
|
|
|
|
mtsp(sid,1);
|
|
asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
|
|
pa |= (ci >> 12) & 0xff; /* move CI (8 bits) into lowest byte */
|
|
|
|
pa |= 0x8000000000000000ULL; /* set "valid" bit */
|
|
*pdir_ptr = cpu_to_le64(pa); /* swap and store into I/O Pdir */
|
|
|
|
/*
|
|
* If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
|
|
* (bit #61, big endian), we have to flush and sync every time
|
|
* IO-PDIR is changed in Ike/Astro.
|
|
*/
|
|
if (ioc_needs_fdc)
|
|
asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_mark_invalid - invalidate one or more IO PDIR entries
|
|
* @ioc: IO MMU structure which owns the pdir we are interested in.
|
|
* @iova: IO Virtual Address mapped earlier
|
|
* @byte_cnt: number of bytes this mapping covers.
|
|
*
|
|
* Marking the IO PDIR entry(ies) as Invalid and invalidate
|
|
* corresponding IO TLB entry. The Ike PCOM (Purge Command Register)
|
|
* is to purge stale entries in the IO TLB when unmapping entries.
|
|
*
|
|
* The PCOM register supports purging of multiple pages, with a minium
|
|
* of 1 page and a maximum of 2GB. Hardware requires the address be
|
|
* aligned to the size of the range being purged. The size of the range
|
|
* must be a power of 2. The "Cool perf optimization" in the
|
|
* allocation routine helps keep that true.
|
|
*/
|
|
static SBA_INLINE void
|
|
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
|
|
{
|
|
u32 iovp = (u32) SBA_IOVP(ioc,iova);
|
|
u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
/* Assert first pdir entry is set.
|
|
**
|
|
** Even though this is a big-endian machine, the entries
|
|
** in the iopdir are little endian. That's why we look at
|
|
** the byte at +7 instead of at +0.
|
|
*/
|
|
if (0x80 != (((u8 *) pdir_ptr)[7])) {
|
|
sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
|
|
}
|
|
#endif
|
|
|
|
if (byte_cnt > IOVP_SIZE)
|
|
{
|
|
#if 0
|
|
unsigned long entries_per_cacheline = ioc_needs_fdc ?
|
|
L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
|
|
- (unsigned long) pdir_ptr;
|
|
: 262144;
|
|
#endif
|
|
|
|
/* set "size" field for PCOM */
|
|
iovp |= get_order(byte_cnt) + PAGE_SHIFT;
|
|
|
|
do {
|
|
/* clear I/O Pdir entry "valid" bit first */
|
|
((u8 *) pdir_ptr)[7] = 0;
|
|
if (ioc_needs_fdc) {
|
|
asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
|
|
#if 0
|
|
entries_per_cacheline = L1_CACHE_SHIFT - 3;
|
|
#endif
|
|
}
|
|
pdir_ptr++;
|
|
byte_cnt -= IOVP_SIZE;
|
|
} while (byte_cnt > IOVP_SIZE);
|
|
} else
|
|
iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
|
|
|
|
/*
|
|
** clear I/O PDIR entry "valid" bit.
|
|
** We have to R/M/W the cacheline regardless how much of the
|
|
** pdir entry that we clobber.
|
|
** The rest of the entry would be useful for debugging if we
|
|
** could dump core on HPMC.
|
|
*/
|
|
((u8 *) pdir_ptr)[7] = 0;
|
|
if (ioc_needs_fdc)
|
|
asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
|
|
|
|
WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
|
|
}
|
|
|
|
/**
|
|
* sba_dma_supported - PCI driver can query DMA support
|
|
* @dev: instance of PCI owned by the driver that's asking
|
|
* @mask: number of address bits this PCI device can handle
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static int sba_dma_supported( struct device *dev, u64 mask)
|
|
{
|
|
struct ioc *ioc;
|
|
|
|
if (dev == NULL) {
|
|
printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
|
|
BUG();
|
|
return(0);
|
|
}
|
|
|
|
/* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
|
|
* then fall back to 32-bit if that fails.
|
|
* We are just "encouraging" 32-bit DMA masks here since we can
|
|
* never allow IOMMU bypass unless we add special support for ZX1.
|
|
*/
|
|
if (mask > ~0U)
|
|
return 0;
|
|
|
|
ioc = GET_IOC(dev);
|
|
|
|
/*
|
|
* check if mask is >= than the current max IO Virt Address
|
|
* The max IO Virt address will *always* < 30 bits.
|
|
*/
|
|
return((int)(mask >= (ioc->ibase - 1 +
|
|
(ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_map_single - map one buffer and return IOVA for DMA
|
|
* @dev: instance of PCI owned by the driver that's asking.
|
|
* @addr: driver buffer to map.
|
|
* @size: number of bytes to map in driver buffer.
|
|
* @direction: R/W or both.
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static dma_addr_t
|
|
sba_map_single(struct device *dev, void *addr, size_t size,
|
|
enum dma_data_direction direction)
|
|
{
|
|
struct ioc *ioc;
|
|
unsigned long flags;
|
|
dma_addr_t iovp;
|
|
dma_addr_t offset;
|
|
u64 *pdir_start;
|
|
int pide;
|
|
|
|
ioc = GET_IOC(dev);
|
|
|
|
/* save offset bits */
|
|
offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
|
|
|
|
/* round up to nearest IOVP_SIZE */
|
|
size = (size + offset + ~IOVP_MASK) & IOVP_MASK;
|
|
|
|
spin_lock_irqsave(&ioc->res_lock, flags);
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
sba_check_pdir(ioc,"Check before sba_map_single()");
|
|
#endif
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
ioc->msingle_calls++;
|
|
ioc->msingle_pages += size >> IOVP_SHIFT;
|
|
#endif
|
|
pide = sba_alloc_range(ioc, size);
|
|
iovp = (dma_addr_t) pide << IOVP_SHIFT;
|
|
|
|
DBG_RUN("%s() 0x%p -> 0x%lx\n",
|
|
__FUNCTION__, addr, (long) iovp | offset);
|
|
|
|
pdir_start = &(ioc->pdir_base[pide]);
|
|
|
|
while (size > 0) {
|
|
sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0);
|
|
|
|
DBG_RUN(" pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n",
|
|
pdir_start,
|
|
(u8) (((u8 *) pdir_start)[7]),
|
|
(u8) (((u8 *) pdir_start)[6]),
|
|
(u8) (((u8 *) pdir_start)[5]),
|
|
(u8) (((u8 *) pdir_start)[4]),
|
|
(u8) (((u8 *) pdir_start)[3]),
|
|
(u8) (((u8 *) pdir_start)[2]),
|
|
(u8) (((u8 *) pdir_start)[1]),
|
|
(u8) (((u8 *) pdir_start)[0])
|
|
);
|
|
|
|
addr += IOVP_SIZE;
|
|
size -= IOVP_SIZE;
|
|
pdir_start++;
|
|
}
|
|
|
|
/* force FDC ops in io_pdir_entry() to be visible to IOMMU */
|
|
if (ioc_needs_fdc)
|
|
asm volatile("sync" : : );
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
sba_check_pdir(ioc,"Check after sba_map_single()");
|
|
#endif
|
|
spin_unlock_irqrestore(&ioc->res_lock, flags);
|
|
|
|
/* form complete address */
|
|
return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_unmap_single - unmap one IOVA and free resources
|
|
* @dev: instance of PCI owned by the driver that's asking.
|
|
* @iova: IOVA of driver buffer previously mapped.
|
|
* @size: number of bytes mapped in driver buffer.
|
|
* @direction: R/W or both.
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static void
|
|
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
|
|
enum dma_data_direction direction)
|
|
{
|
|
struct ioc *ioc;
|
|
#if DELAYED_RESOURCE_CNT > 0
|
|
struct sba_dma_pair *d;
|
|
#endif
|
|
unsigned long flags;
|
|
dma_addr_t offset;
|
|
|
|
DBG_RUN("%s() iovp 0x%lx/%x\n", __FUNCTION__, (long) iova, size);
|
|
|
|
ioc = GET_IOC(dev);
|
|
offset = iova & ~IOVP_MASK;
|
|
iova ^= offset; /* clear offset bits */
|
|
size += offset;
|
|
size = ROUNDUP(size, IOVP_SIZE);
|
|
|
|
spin_lock_irqsave(&ioc->res_lock, flags);
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
ioc->usingle_calls++;
|
|
ioc->usingle_pages += size >> IOVP_SHIFT;
|
|
#endif
|
|
|
|
sba_mark_invalid(ioc, iova, size);
|
|
|
|
#if DELAYED_RESOURCE_CNT > 0
|
|
/* Delaying when we re-use a IO Pdir entry reduces the number
|
|
* of MMIO reads needed to flush writes to the PCOM register.
|
|
*/
|
|
d = &(ioc->saved[ioc->saved_cnt]);
|
|
d->iova = iova;
|
|
d->size = size;
|
|
if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
|
|
int cnt = ioc->saved_cnt;
|
|
while (cnt--) {
|
|
sba_free_range(ioc, d->iova, d->size);
|
|
d--;
|
|
}
|
|
ioc->saved_cnt = 0;
|
|
|
|
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
|
|
}
|
|
#else /* DELAYED_RESOURCE_CNT == 0 */
|
|
sba_free_range(ioc, iova, size);
|
|
|
|
/* If fdc's were issued, force fdc's to be visible now */
|
|
if (ioc_needs_fdc)
|
|
asm volatile("sync" : : );
|
|
|
|
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
|
|
#endif /* DELAYED_RESOURCE_CNT == 0 */
|
|
|
|
spin_unlock_irqrestore(&ioc->res_lock, flags);
|
|
|
|
/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
|
|
** For Astro based systems this isn't a big deal WRT performance.
|
|
** As long as 2.4 kernels copyin/copyout data from/to userspace,
|
|
** we don't need the syncdma. The issue here is I/O MMU cachelines
|
|
** are *not* coherent in all cases. May be hwrev dependent.
|
|
** Need to investigate more.
|
|
asm volatile("syncdma");
|
|
*/
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_alloc_consistent - allocate/map shared mem for DMA
|
|
* @hwdev: instance of PCI owned by the driver that's asking.
|
|
* @size: number of bytes mapped in driver buffer.
|
|
* @dma_handle: IOVA of new buffer.
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
|
|
dma_addr_t *dma_handle, gfp_t gfp)
|
|
{
|
|
void *ret;
|
|
|
|
if (!hwdev) {
|
|
/* only support PCI */
|
|
*dma_handle = 0;
|
|
return 0;
|
|
}
|
|
|
|
ret = (void *) __get_free_pages(gfp, get_order(size));
|
|
|
|
if (ret) {
|
|
memset(ret, 0, size);
|
|
*dma_handle = sba_map_single(hwdev, ret, size, 0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_free_consistent - free/unmap shared mem for DMA
|
|
* @hwdev: instance of PCI owned by the driver that's asking.
|
|
* @size: number of bytes mapped in driver buffer.
|
|
* @vaddr: virtual address IOVA of "consistent" buffer.
|
|
* @dma_handler: IO virtual address of "consistent" buffer.
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static void
|
|
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
|
|
dma_addr_t dma_handle)
|
|
{
|
|
sba_unmap_single(hwdev, dma_handle, size, 0);
|
|
free_pages((unsigned long) vaddr, get_order(size));
|
|
}
|
|
|
|
|
|
/*
|
|
** Since 0 is a valid pdir_base index value, can't use that
|
|
** to determine if a value is valid or not. Use a flag to indicate
|
|
** the SG list entry contains a valid pdir index.
|
|
*/
|
|
#define PIDE_FLAG 0x80000000UL
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
#define IOMMU_MAP_STATS
|
|
#endif
|
|
#include "iommu-helpers.h"
|
|
|
|
#ifdef DEBUG_LARGE_SG_ENTRIES
|
|
int dump_run_sg = 0;
|
|
#endif
|
|
|
|
|
|
/**
|
|
* sba_map_sg - map Scatter/Gather list
|
|
* @dev: instance of PCI owned by the driver that's asking.
|
|
* @sglist: array of buffer/length pairs
|
|
* @nents: number of entries in list
|
|
* @direction: R/W or both.
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static int
|
|
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
|
|
enum dma_data_direction direction)
|
|
{
|
|
struct ioc *ioc;
|
|
int coalesced, filled = 0;
|
|
unsigned long flags;
|
|
|
|
DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
|
|
|
|
ioc = GET_IOC(dev);
|
|
|
|
/* Fast path single entry scatterlists. */
|
|
if (nents == 1) {
|
|
sg_dma_address(sglist) = sba_map_single(dev,
|
|
(void *)sg_virt_addr(sglist),
|
|
sglist->length, direction);
|
|
sg_dma_len(sglist) = sglist->length;
|
|
return 1;
|
|
}
|
|
|
|
spin_lock_irqsave(&ioc->res_lock, flags);
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
|
|
{
|
|
sba_dump_sg(ioc, sglist, nents);
|
|
panic("Check before sba_map_sg()");
|
|
}
|
|
#endif
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
ioc->msg_calls++;
|
|
#endif
|
|
|
|
/*
|
|
** First coalesce the chunks and allocate I/O pdir space
|
|
**
|
|
** If this is one DMA stream, we can properly map using the
|
|
** correct virtual address associated with each DMA page.
|
|
** w/o this association, we wouldn't have coherent DMA!
|
|
** Access to the virtual address is what forces a two pass algorithm.
|
|
*/
|
|
coalesced = iommu_coalesce_chunks(ioc, sglist, nents, sba_alloc_range);
|
|
|
|
/*
|
|
** Program the I/O Pdir
|
|
**
|
|
** map the virtual addresses to the I/O Pdir
|
|
** o dma_address will contain the pdir index
|
|
** o dma_len will contain the number of bytes to map
|
|
** o address contains the virtual address.
|
|
*/
|
|
filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
|
|
|
|
/* force FDC ops in io_pdir_entry() to be visible to IOMMU */
|
|
if (ioc_needs_fdc)
|
|
asm volatile("sync" : : );
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
|
|
{
|
|
sba_dump_sg(ioc, sglist, nents);
|
|
panic("Check after sba_map_sg()\n");
|
|
}
|
|
#endif
|
|
|
|
spin_unlock_irqrestore(&ioc->res_lock, flags);
|
|
|
|
DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
|
|
|
|
return filled;
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_unmap_sg - unmap Scatter/Gather list
|
|
* @dev: instance of PCI owned by the driver that's asking.
|
|
* @sglist: array of buffer/length pairs
|
|
* @nents: number of entries in list
|
|
* @direction: R/W or both.
|
|
*
|
|
* See Documentation/DMA-mapping.txt
|
|
*/
|
|
static void
|
|
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
|
|
enum dma_data_direction direction)
|
|
{
|
|
struct ioc *ioc;
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
DBG_RUN_SG("%s() START %d entries, %p,%x\n",
|
|
__FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
|
|
|
|
ioc = GET_IOC(dev);
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
ioc->usg_calls++;
|
|
#endif
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
spin_lock_irqsave(&ioc->res_lock, flags);
|
|
sba_check_pdir(ioc,"Check before sba_unmap_sg()");
|
|
spin_unlock_irqrestore(&ioc->res_lock, flags);
|
|
#endif
|
|
|
|
while (sg_dma_len(sglist) && nents--) {
|
|
|
|
sba_unmap_single(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction);
|
|
#ifdef SBA_COLLECT_STATS
|
|
ioc->usg_pages += ((sg_dma_address(sglist) & ~IOVP_MASK) + sg_dma_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
|
|
ioc->usingle_calls--; /* kluge since call is unmap_sg() */
|
|
#endif
|
|
++sglist;
|
|
}
|
|
|
|
DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
spin_lock_irqsave(&ioc->res_lock, flags);
|
|
sba_check_pdir(ioc,"Check after sba_unmap_sg()");
|
|
spin_unlock_irqrestore(&ioc->res_lock, flags);
|
|
#endif
|
|
|
|
}
|
|
|
|
static struct hppa_dma_ops sba_ops = {
|
|
.dma_supported = sba_dma_supported,
|
|
.alloc_consistent = sba_alloc_consistent,
|
|
.alloc_noncoherent = sba_alloc_consistent,
|
|
.free_consistent = sba_free_consistent,
|
|
.map_single = sba_map_single,
|
|
.unmap_single = sba_unmap_single,
|
|
.map_sg = sba_map_sg,
|
|
.unmap_sg = sba_unmap_sg,
|
|
.dma_sync_single_for_cpu = NULL,
|
|
.dma_sync_single_for_device = NULL,
|
|
.dma_sync_sg_for_cpu = NULL,
|
|
.dma_sync_sg_for_device = NULL,
|
|
};
|
|
|
|
|
|
/**************************************************************************
|
|
**
|
|
** SBA PAT PDC support
|
|
**
|
|
** o call pdc_pat_cell_module()
|
|
** o store ranges in PCI "resource" structures
|
|
**
|
|
**************************************************************************/
|
|
|
|
static void
|
|
sba_get_pat_resources(struct sba_device *sba_dev)
|
|
{
|
|
#if 0
|
|
/*
|
|
** TODO/REVISIT/FIXME: support for directed ranges requires calls to
|
|
** PAT PDC to program the SBA/LBA directed range registers...this
|
|
** burden may fall on the LBA code since it directly supports the
|
|
** PCI subsystem. It's not clear yet. - ggg
|
|
*/
|
|
PAT_MOD(mod)->mod_info.mod_pages = PAT_GET_MOD_PAGES(temp);
|
|
FIXME : ???
|
|
PAT_MOD(mod)->mod_info.dvi = PAT_GET_DVI(temp);
|
|
Tells where the dvi bits are located in the address.
|
|
PAT_MOD(mod)->mod_info.ioc = PAT_GET_IOC(temp);
|
|
FIXME : ???
|
|
#endif
|
|
}
|
|
|
|
|
|
/**************************************************************
|
|
*
|
|
* Initialization and claim
|
|
*
|
|
***************************************************************/
|
|
#define PIRANHA_ADDR_MASK 0x00160000UL /* bit 17,18,20 */
|
|
#define PIRANHA_ADDR_VAL 0x00060000UL /* bit 17,18 on */
|
|
static void *
|
|
sba_alloc_pdir(unsigned int pdir_size)
|
|
{
|
|
unsigned long pdir_base;
|
|
unsigned long pdir_order = get_order(pdir_size);
|
|
|
|
pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
|
|
if (NULL == (void *) pdir_base) {
|
|
panic("%s() could not allocate I/O Page Table\n",
|
|
__FUNCTION__);
|
|
}
|
|
|
|
/* If this is not PA8700 (PCX-W2)
|
|
** OR newer than ver 2.2
|
|
** OR in a system that doesn't need VINDEX bits from SBA,
|
|
**
|
|
** then we aren't exposed to the HW bug.
|
|
*/
|
|
if ( ((boot_cpu_data.pdc.cpuid >> 5) & 0x7f) != 0x13
|
|
|| (boot_cpu_data.pdc.versions > 0x202)
|
|
|| (boot_cpu_data.pdc.capabilities & 0x08L) )
|
|
return (void *) pdir_base;
|
|
|
|
/*
|
|
* PA8700 (PCX-W2, aka piranha) silent data corruption fix
|
|
*
|
|
* An interaction between PA8700 CPU (Ver 2.2 or older) and
|
|
* Ike/Astro can cause silent data corruption. This is only
|
|
* a problem if the I/O PDIR is located in memory such that
|
|
* (little-endian) bits 17 and 18 are on and bit 20 is off.
|
|
*
|
|
* Since the max IO Pdir size is 2MB, by cleverly allocating the
|
|
* right physical address, we can either avoid (IOPDIR <= 1MB)
|
|
* or minimize (2MB IO Pdir) the problem if we restrict the
|
|
* IO Pdir to a maximum size of 2MB-128K (1902K).
|
|
*
|
|
* Because we always allocate 2^N sized IO pdirs, either of the
|
|
* "bad" regions will be the last 128K if at all. That's easy
|
|
* to test for.
|
|
*
|
|
*/
|
|
if (pdir_order <= (19-12)) {
|
|
if (((virt_to_phys(pdir_base)+pdir_size-1) & PIRANHA_ADDR_MASK) == PIRANHA_ADDR_VAL) {
|
|
/* allocate a new one on 512k alignment */
|
|
unsigned long new_pdir = __get_free_pages(GFP_KERNEL, (19-12));
|
|
/* release original */
|
|
free_pages(pdir_base, pdir_order);
|
|
|
|
pdir_base = new_pdir;
|
|
|
|
/* release excess */
|
|
while (pdir_order < (19-12)) {
|
|
new_pdir += pdir_size;
|
|
free_pages(new_pdir, pdir_order);
|
|
pdir_order +=1;
|
|
pdir_size <<=1;
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
** 1MB or 2MB Pdir
|
|
** Needs to be aligned on an "odd" 1MB boundary.
|
|
*/
|
|
unsigned long new_pdir = __get_free_pages(GFP_KERNEL, pdir_order+1); /* 2 or 4MB */
|
|
|
|
/* release original */
|
|
free_pages( pdir_base, pdir_order);
|
|
|
|
/* release first 1MB */
|
|
free_pages(new_pdir, 20-12);
|
|
|
|
pdir_base = new_pdir + 1024*1024;
|
|
|
|
if (pdir_order > (20-12)) {
|
|
/*
|
|
** 2MB Pdir.
|
|
**
|
|
** Flag tells init_bitmap() to mark bad 128k as used
|
|
** and to reduce the size by 128k.
|
|
*/
|
|
piranha_bad_128k = 1;
|
|
|
|
new_pdir += 3*1024*1024;
|
|
/* release last 1MB */
|
|
free_pages(new_pdir, 20-12);
|
|
|
|
/* release unusable 128KB */
|
|
free_pages(new_pdir - 128*1024 , 17-12);
|
|
|
|
pdir_size -= 128*1024;
|
|
}
|
|
}
|
|
|
|
memset((void *) pdir_base, 0, pdir_size);
|
|
return (void *) pdir_base;
|
|
}
|
|
|
|
static struct device *next_device(struct klist_iter *i)
|
|
{
|
|
struct klist_node * n = klist_next(i);
|
|
return n ? container_of(n, struct device, knode_parent) : NULL;
|
|
}
|
|
|
|
/* setup Mercury or Elroy IBASE/IMASK registers. */
|
|
static void
|
|
setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
|
|
{
|
|
/* lba_set_iregs() is in drivers/parisc/lba_pci.c */
|
|
extern void lba_set_iregs(struct parisc_device *, u32, u32);
|
|
struct device *dev;
|
|
struct klist_iter i;
|
|
|
|
klist_iter_init(&sba->dev.klist_children, &i);
|
|
while ((dev = next_device(&i))) {
|
|
struct parisc_device *lba = to_parisc_device(dev);
|
|
int rope_num = (lba->hpa.start >> 13) & 0xf;
|
|
if (rope_num >> 3 == ioc_num)
|
|
lba_set_iregs(lba, ioc->ibase, ioc->imask);
|
|
}
|
|
klist_iter_exit(&i);
|
|
}
|
|
|
|
static void
|
|
sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
|
|
{
|
|
u32 iova_space_mask;
|
|
u32 iova_space_size;
|
|
int iov_order, tcnfg;
|
|
#ifdef SBA_AGP_SUPPORT
|
|
int agp_found = 0;
|
|
#endif
|
|
/*
|
|
** Firmware programs the base and size of a "safe IOVA space"
|
|
** (one that doesn't overlap memory or LMMIO space) in the
|
|
** IBASE and IMASK registers.
|
|
*/
|
|
ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE);
|
|
iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
|
|
|
|
if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) {
|
|
printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n");
|
|
iova_space_size /= 2;
|
|
}
|
|
|
|
/*
|
|
** iov_order is always based on a 1GB IOVA space since we want to
|
|
** turn on the other half for AGP GART.
|
|
*/
|
|
iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT));
|
|
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
|
|
|
|
DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits)\n",
|
|
__FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20,
|
|
iov_order + PAGE_SHIFT);
|
|
|
|
ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
|
|
get_order(ioc->pdir_size));
|
|
if (!ioc->pdir_base)
|
|
panic("Couldn't allocate I/O Page Table\n");
|
|
|
|
memset(ioc->pdir_base, 0, ioc->pdir_size);
|
|
|
|
DBG_INIT("%s() pdir %p size %x\n",
|
|
__FUNCTION__, ioc->pdir_base, ioc->pdir_size);
|
|
|
|
#ifdef SBA_HINT_SUPPORT
|
|
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
|
|
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
|
|
|
|
DBG_INIT(" hint_shift_pdir %x hint_mask_pdir %lx\n",
|
|
ioc->hint_shift_pdir, ioc->hint_mask_pdir);
|
|
#endif
|
|
|
|
WARN_ON((((unsigned long) ioc->pdir_base) & PAGE_MASK) != (unsigned long) ioc->pdir_base);
|
|
WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
|
|
|
|
/* build IMASK for IOC and Elroy */
|
|
iova_space_mask = 0xffffffff;
|
|
iova_space_mask <<= (iov_order + PAGE_SHIFT);
|
|
ioc->imask = iova_space_mask;
|
|
#ifdef ZX1_SUPPORT
|
|
ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
|
|
#endif
|
|
sba_dump_tlb(ioc->ioc_hpa);
|
|
|
|
setup_ibase_imask(sba, ioc, ioc_num);
|
|
|
|
WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
|
|
|
|
#ifdef CONFIG_64BIT
|
|
/*
|
|
** Setting the upper bits makes checking for bypass addresses
|
|
** a little faster later on.
|
|
*/
|
|
ioc->imask |= 0xFFFFFFFF00000000UL;
|
|
#endif
|
|
|
|
/* Set I/O PDIR Page size to system page size */
|
|
switch (PAGE_SHIFT) {
|
|
case 12: tcnfg = 0; break; /* 4K */
|
|
case 13: tcnfg = 1; break; /* 8K */
|
|
case 14: tcnfg = 2; break; /* 16K */
|
|
case 16: tcnfg = 3; break; /* 64K */
|
|
default:
|
|
panic(__FILE__ "Unsupported system page size %d",
|
|
1 << PAGE_SHIFT);
|
|
break;
|
|
}
|
|
WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);
|
|
|
|
/*
|
|
** Program the IOC's ibase and enable IOVA translation
|
|
** Bit zero == enable bit.
|
|
*/
|
|
WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
|
|
|
|
/*
|
|
** Clear I/O TLB of any possible entries.
|
|
** (Yes. This is a bit paranoid...but so what)
|
|
*/
|
|
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
|
|
|
|
#ifdef SBA_AGP_SUPPORT
|
|
/*
|
|
** If an AGP device is present, only use half of the IOV space
|
|
** for PCI DMA. Unfortunately we can't know ahead of time
|
|
** whether GART support will actually be used, for now we
|
|
** can just key on any AGP device found in the system.
|
|
** We program the next pdir index after we stop w/ a key for
|
|
** the GART code to handshake on.
|
|
*/
|
|
device=NULL;
|
|
for (lba = sba->child; lba; lba = lba->sibling) {
|
|
if (IS_QUICKSILVER(lba))
|
|
break;
|
|
}
|
|
|
|
if (lba) {
|
|
DBG_INIT("%s: Reserving half of IOVA space for AGP GART support\n", __FUNCTION__);
|
|
ioc->pdir_size /= 2;
|
|
((u64 *)ioc->pdir_base)[PDIR_INDEX(iova_space_size/2)] = SBA_IOMMU_COOKIE;
|
|
} else {
|
|
DBG_INIT("%s: No GART needed - no AGP controller found\n", __FUNCTION__);
|
|
}
|
|
#endif /* 0 */
|
|
|
|
}
|
|
|
|
static void
|
|
sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
|
|
{
|
|
u32 iova_space_size, iova_space_mask;
|
|
unsigned int pdir_size, iov_order;
|
|
|
|
/*
|
|
** Determine IOVA Space size from memory size.
|
|
**
|
|
** Ideally, PCI drivers would register the maximum number
|
|
** of DMA they can have outstanding for each device they
|
|
** own. Next best thing would be to guess how much DMA
|
|
** can be outstanding based on PCI Class/sub-class. Both
|
|
** methods still require some "extra" to support PCI
|
|
** Hot-Plug/Removal of PCI cards. (aka PCI OLARD).
|
|
**
|
|
** While we have 32-bits "IOVA" space, top two 2 bits are used
|
|
** for DMA hints - ergo only 30 bits max.
|
|
*/
|
|
|
|
iova_space_size = (u32) (num_physpages/global_ioc_cnt);
|
|
|
|
/* limit IOVA space size to 1MB-1GB */
|
|
if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
|
|
iova_space_size = 1 << (20 - PAGE_SHIFT);
|
|
}
|
|
else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
|
|
iova_space_size = 1 << (30 - PAGE_SHIFT);
|
|
}
|
|
|
|
/*
|
|
** iova space must be log2() in size.
|
|
** thus, pdir/res_map will also be log2().
|
|
** PIRANHA BUG: Exception is when IO Pdir is 2MB (gets reduced)
|
|
*/
|
|
iov_order = get_order(iova_space_size << PAGE_SHIFT);
|
|
|
|
/* iova_space_size is now bytes, not pages */
|
|
iova_space_size = 1 << (iov_order + PAGE_SHIFT);
|
|
|
|
ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
|
|
|
|
DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n",
|
|
__FUNCTION__,
|
|
ioc->ioc_hpa,
|
|
(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
|
|
iova_space_size>>20,
|
|
iov_order + PAGE_SHIFT);
|
|
|
|
ioc->pdir_base = sba_alloc_pdir(pdir_size);
|
|
|
|
DBG_INIT("%s() pdir %p size %x\n",
|
|
__FUNCTION__, ioc->pdir_base, pdir_size);
|
|
|
|
#ifdef SBA_HINT_SUPPORT
|
|
/* FIXME : DMA HINTs not used */
|
|
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
|
|
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
|
|
|
|
DBG_INIT(" hint_shift_pdir %x hint_mask_pdir %lx\n",
|
|
ioc->hint_shift_pdir, ioc->hint_mask_pdir);
|
|
#endif
|
|
|
|
WRITE_REG64(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
|
|
|
|
/* build IMASK for IOC and Elroy */
|
|
iova_space_mask = 0xffffffff;
|
|
iova_space_mask <<= (iov_order + PAGE_SHIFT);
|
|
|
|
/*
|
|
** On C3000 w/512MB mem, HP-UX 10.20 reports:
|
|
** ibase=0, imask=0xFE000000, size=0x2000000.
|
|
*/
|
|
ioc->ibase = 0;
|
|
ioc->imask = iova_space_mask; /* save it */
|
|
#ifdef ZX1_SUPPORT
|
|
ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
|
|
#endif
|
|
|
|
DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
|
|
__FUNCTION__, ioc->ibase, ioc->imask);
|
|
|
|
/*
|
|
** FIXME: Hint registers are programmed with default hint
|
|
** values during boot, so hints should be sane even if we
|
|
** can't reprogram them the way drivers want.
|
|
*/
|
|
|
|
setup_ibase_imask(sba, ioc, ioc_num);
|
|
|
|
/*
|
|
** Program the IOC's ibase and enable IOVA translation
|
|
*/
|
|
WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
|
|
WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
|
|
|
|
/* Set I/O PDIR Page size to 4K */
|
|
WRITE_REG(0, ioc->ioc_hpa+IOC_TCNFG);
|
|
|
|
/*
|
|
** Clear I/O TLB of any possible entries.
|
|
** (Yes. This is a bit paranoid...but so what)
|
|
*/
|
|
WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);
|
|
|
|
ioc->ibase = 0; /* used by SBA_IOVA and related macros */
|
|
|
|
DBG_INIT("%s() DONE\n", __FUNCTION__);
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
**
|
|
** SBA initialization code (HW and SW)
|
|
**
|
|
** o identify SBA chip itself
|
|
** o initialize SBA chip modes (HardFail)
|
|
** o initialize SBA chip modes (HardFail)
|
|
** o FIXME: initialize DMA hints for reasonable defaults
|
|
**
|
|
**************************************************************************/
|
|
|
|
static void __iomem *ioc_remap(struct sba_device *sba_dev, unsigned int offset)
|
|
{
|
|
return ioremap_nocache(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
|
|
}
|
|
|
|
static void sba_hw_init(struct sba_device *sba_dev)
|
|
{
|
|
int i;
|
|
int num_ioc;
|
|
u64 ioc_ctl;
|
|
|
|
if (!is_pdc_pat()) {
|
|
/* Shutdown the USB controller on Astro-based workstations.
|
|
** Once we reprogram the IOMMU, the next DMA performed by
|
|
** USB will HPMC the box. USB is only enabled if a
|
|
** keyboard is present and found.
|
|
**
|
|
** With serial console, j6k v5.0 firmware says:
|
|
** mem_kbd hpa 0xfee003f8 sba 0x0 pad 0x0 cl_class 0x7
|
|
**
|
|
** FIXME: Using GFX+USB console at power up but direct
|
|
** linux to serial console is still broken.
|
|
** USB could generate DMA so we must reset USB.
|
|
** The proper sequence would be:
|
|
** o block console output
|
|
** o reset USB device
|
|
** o reprogram serial port
|
|
** o unblock console output
|
|
*/
|
|
if (PAGE0->mem_kbd.cl_class == CL_KEYBD) {
|
|
pdc_io_reset_devices();
|
|
}
|
|
|
|
}
|
|
|
|
|
|
#if 0
|
|
printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
|
|
PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
|
|
|
|
/*
|
|
** Need to deal with DMA from LAN.
|
|
** Maybe use page zero boot device as a handle to talk
|
|
** to PDC about which device to shutdown.
|
|
**
|
|
** Netbooting, j6k v5.0 firmware says:
|
|
** mem_boot hpa 0xf4008000 sba 0x0 pad 0x0 cl_class 0x1002
|
|
** ARGH! invalid class.
|
|
*/
|
|
if ((PAGE0->mem_boot.cl_class != CL_RANDOM)
|
|
&& (PAGE0->mem_boot.cl_class != CL_SEQU)) {
|
|
pdc_io_reset();
|
|
}
|
|
#endif
|
|
|
|
if (!IS_PLUTO(sba_dev->iodc)) {
|
|
ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL);
|
|
DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->",
|
|
__FUNCTION__, sba_dev->sba_hpa, ioc_ctl);
|
|
ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE);
|
|
ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC;
|
|
/* j6700 v1.6 firmware sets 0x294f */
|
|
/* A500 firmware sets 0x4d */
|
|
|
|
WRITE_REG(ioc_ctl, sba_dev->sba_hpa+IOC_CTRL);
|
|
|
|
#ifdef DEBUG_SBA_INIT
|
|
ioc_ctl = READ_REG64(sba_dev->sba_hpa+IOC_CTRL);
|
|
DBG_INIT(" 0x%Lx\n", ioc_ctl);
|
|
#endif
|
|
} /* if !PLUTO */
|
|
|
|
if (IS_ASTRO(sba_dev->iodc)) {
|
|
int err;
|
|
/* PAT_PDC (L-class) also reports the same goofy base */
|
|
sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, ASTRO_IOC_OFFSET);
|
|
num_ioc = 1;
|
|
|
|
sba_dev->chip_resv.name = "Astro Intr Ack";
|
|
sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
|
|
sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff000000UL - 1) ;
|
|
err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
|
|
BUG_ON(err < 0);
|
|
|
|
} else if (IS_PLUTO(sba_dev->iodc)) {
|
|
int err;
|
|
|
|
/* We use a negative value for IOC HPA so it gets
|
|
* corrected when we add it with IKE's IOC offset.
|
|
* Doesnt look clean, but fewer code.
|
|
*/
|
|
sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, PLUTO_IOC_OFFSET);
|
|
num_ioc = 1;
|
|
|
|
sba_dev->chip_resv.name = "Pluto Intr/PIOP/VGA";
|
|
sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfee00000UL;
|
|
sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff200000UL - 1);
|
|
err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
|
|
WARN_ON(err < 0);
|
|
|
|
sba_dev->iommu_resv.name = "IOVA Space";
|
|
sba_dev->iommu_resv.start = 0x40000000UL;
|
|
sba_dev->iommu_resv.end = 0x50000000UL - 1;
|
|
err = request_resource(&iomem_resource, &(sba_dev->iommu_resv));
|
|
WARN_ON(err < 0);
|
|
} else {
|
|
/* IS_IKE (ie N-class, L3000, L1500) */
|
|
sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(0));
|
|
sba_dev->ioc[1].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(1));
|
|
num_ioc = 2;
|
|
|
|
/* TODO - LOOKUP Ike/Stretch chipset mem map */
|
|
}
|
|
/* XXX: What about Reo? */
|
|
|
|
sba_dev->num_ioc = num_ioc;
|
|
for (i = 0; i < num_ioc; i++) {
|
|
unsigned long ioc_hpa = sba_dev->ioc[i].ioc_hpa;
|
|
unsigned int j;
|
|
|
|
for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) {
|
|
|
|
/*
|
|
* Clear ROPE(N)_CONFIG AO bit.
|
|
* Disables "NT Ordering" (~= !"Relaxed Ordering")
|
|
* Overrides bit 1 in DMA Hint Sets.
|
|
* Improves netperf UDP_STREAM by ~10% for bcm5701.
|
|
*/
|
|
if (IS_PLUTO(sba_dev->iodc)) {
|
|
unsigned long rope_cfg, cfg_val;
|
|
|
|
rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j;
|
|
cfg_val = READ_REG(rope_cfg);
|
|
cfg_val &= ~IOC_ROPE_AO;
|
|
WRITE_REG(cfg_val, rope_cfg);
|
|
}
|
|
|
|
/*
|
|
** Make sure the box crashes on rope errors.
|
|
*/
|
|
WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j);
|
|
}
|
|
|
|
/* flush out the last writes */
|
|
READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
|
|
|
|
DBG_INIT(" ioc[%d] ROPE_CFG 0x%Lx ROPE_DBG 0x%Lx\n",
|
|
i,
|
|
READ_REG(sba_dev->ioc[i].ioc_hpa + 0x40),
|
|
READ_REG(sba_dev->ioc[i].ioc_hpa + 0x50)
|
|
);
|
|
DBG_INIT(" STATUS_CONTROL 0x%Lx FLUSH_CTRL 0x%Lx\n",
|
|
READ_REG(sba_dev->ioc[i].ioc_hpa + 0x108),
|
|
READ_REG(sba_dev->ioc[i].ioc_hpa + 0x400)
|
|
);
|
|
|
|
if (IS_PLUTO(sba_dev->iodc)) {
|
|
sba_ioc_init_pluto(sba_dev->dev, &(sba_dev->ioc[i]), i);
|
|
} else {
|
|
sba_ioc_init(sba_dev->dev, &(sba_dev->ioc[i]), i);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
sba_common_init(struct sba_device *sba_dev)
|
|
{
|
|
int i;
|
|
|
|
/* add this one to the head of the list (order doesn't matter)
|
|
** This will be useful for debugging - especially if we get coredumps
|
|
*/
|
|
sba_dev->next = sba_list;
|
|
sba_list = sba_dev;
|
|
|
|
for(i=0; i< sba_dev->num_ioc; i++) {
|
|
int res_size;
|
|
#ifdef DEBUG_DMB_TRAP
|
|
extern void iterate_pages(unsigned long , unsigned long ,
|
|
void (*)(pte_t * , unsigned long),
|
|
unsigned long );
|
|
void set_data_memory_break(pte_t * , unsigned long);
|
|
#endif
|
|
/* resource map size dictated by pdir_size */
|
|
res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */
|
|
|
|
/* Second part of PIRANHA BUG */
|
|
if (piranha_bad_128k) {
|
|
res_size -= (128*1024)/sizeof(u64);
|
|
}
|
|
|
|
res_size >>= 3; /* convert bit count to byte count */
|
|
DBG_INIT("%s() res_size 0x%x\n",
|
|
__FUNCTION__, res_size);
|
|
|
|
sba_dev->ioc[i].res_size = res_size;
|
|
sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
|
|
|
|
#ifdef DEBUG_DMB_TRAP
|
|
iterate_pages( sba_dev->ioc[i].res_map, res_size,
|
|
set_data_memory_break, 0);
|
|
#endif
|
|
|
|
if (NULL == sba_dev->ioc[i].res_map)
|
|
{
|
|
panic("%s:%s() could not allocate resource map\n",
|
|
__FILE__, __FUNCTION__ );
|
|
}
|
|
|
|
memset(sba_dev->ioc[i].res_map, 0, res_size);
|
|
/* next available IOVP - circular search */
|
|
sba_dev->ioc[i].res_hint = (unsigned long *)
|
|
&(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);
|
|
|
|
#ifdef ASSERT_PDIR_SANITY
|
|
/* Mark first bit busy - ie no IOVA 0 */
|
|
sba_dev->ioc[i].res_map[0] = 0x80;
|
|
sba_dev->ioc[i].pdir_base[0] = 0xeeffc0addbba0080ULL;
|
|
#endif
|
|
|
|
/* Third (and last) part of PIRANHA BUG */
|
|
if (piranha_bad_128k) {
|
|
/* region from +1408K to +1536 is un-usable. */
|
|
|
|
int idx_start = (1408*1024/sizeof(u64)) >> 3;
|
|
int idx_end = (1536*1024/sizeof(u64)) >> 3;
|
|
long *p_start = (long *) &(sba_dev->ioc[i].res_map[idx_start]);
|
|
long *p_end = (long *) &(sba_dev->ioc[i].res_map[idx_end]);
|
|
|
|
/* mark that part of the io pdir busy */
|
|
while (p_start < p_end)
|
|
*p_start++ = -1;
|
|
|
|
}
|
|
|
|
#ifdef DEBUG_DMB_TRAP
|
|
iterate_pages( sba_dev->ioc[i].res_map, res_size,
|
|
set_data_memory_break, 0);
|
|
iterate_pages( sba_dev->ioc[i].pdir_base, sba_dev->ioc[i].pdir_size,
|
|
set_data_memory_break, 0);
|
|
#endif
|
|
|
|
DBG_INIT("%s() %d res_map %x %p\n",
|
|
__FUNCTION__, i, res_size, sba_dev->ioc[i].res_map);
|
|
}
|
|
|
|
spin_lock_init(&sba_dev->sba_lock);
|
|
ioc_needs_fdc = boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC;
|
|
|
|
#ifdef DEBUG_SBA_INIT
|
|
/*
|
|
* If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
|
|
* (bit #61, big endian), we have to flush and sync every time
|
|
* IO-PDIR is changed in Ike/Astro.
|
|
*/
|
|
if (boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC) {
|
|
printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
|
|
} else {
|
|
printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
static int sba_proc_info(struct seq_file *m, void *p)
|
|
{
|
|
struct sba_device *sba_dev = sba_list;
|
|
struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
|
|
int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
|
|
#ifdef SBA_COLLECT_STATS
|
|
unsigned long avg = 0, min, max;
|
|
#endif
|
|
int i, len = 0;
|
|
|
|
len += seq_printf(m, "%s rev %d.%d\n",
|
|
sba_dev->name,
|
|
(sba_dev->hw_rev & 0x7) + 1,
|
|
(sba_dev->hw_rev & 0x18) >> 3
|
|
);
|
|
len += seq_printf(m, "IO PDIR size : %d bytes (%d entries)\n",
|
|
(int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
|
|
total_pages);
|
|
|
|
len += seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n",
|
|
ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */
|
|
|
|
len += seq_printf(m, "LMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
|
|
READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE),
|
|
READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK),
|
|
READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE)
|
|
);
|
|
|
|
for (i=0; i<4; i++)
|
|
len += seq_printf(m, "DIR%d_BASE/MASK/ROUTE %08x %08x %08x\n", i,
|
|
READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE + i*0x18),
|
|
READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK + i*0x18),
|
|
READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18)
|
|
);
|
|
|
|
#ifdef SBA_COLLECT_STATS
|
|
len += seq_printf(m, "IO PDIR entries : %ld free %ld used (%d%%)\n",
|
|
total_pages - ioc->used_pages, ioc->used_pages,
|
|
(int) (ioc->used_pages * 100 / total_pages));
|
|
|
|
min = max = ioc->avg_search[0];
|
|
for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
|
|
avg += ioc->avg_search[i];
|
|
if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
|
|
if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
|
|
}
|
|
avg /= SBA_SEARCH_SAMPLE;
|
|
len += seq_printf(m, " Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
|
|
min, avg, max);
|
|
|
|
len += seq_printf(m, "pci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n",
|
|
ioc->msingle_calls, ioc->msingle_pages,
|
|
(int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));
|
|
|
|
/* KLUGE - unmap_sg calls unmap_single for each mapped page */
|
|
min = ioc->usingle_calls;
|
|
max = ioc->usingle_pages - ioc->usg_pages;
|
|
len += seq_printf(m, "pci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n",
|
|
min, max, (int) ((max * 1000)/min));
|
|
|
|
len += seq_printf(m, "pci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
|
|
ioc->msg_calls, ioc->msg_pages,
|
|
(int) ((ioc->msg_pages * 1000)/ioc->msg_calls));
|
|
|
|
len += seq_printf(m, "pci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
|
|
ioc->usg_calls, ioc->usg_pages,
|
|
(int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sba_proc_open(struct inode *i, struct file *f)
|
|
{
|
|
return single_open(f, &sba_proc_info, NULL);
|
|
}
|
|
|
|
static struct file_operations sba_proc_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = sba_proc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int
|
|
sba_proc_bitmap_info(struct seq_file *m, void *p)
|
|
{
|
|
struct sba_device *sba_dev = sba_list;
|
|
struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
|
|
unsigned int *res_ptr = (unsigned int *)ioc->res_map;
|
|
int i, len = 0;
|
|
|
|
for (i = 0; i < (ioc->res_size/sizeof(unsigned int)); ++i, ++res_ptr) {
|
|
if ((i & 7) == 0)
|
|
len += seq_printf(m, "\n ");
|
|
len += seq_printf(m, " %08x", *res_ptr);
|
|
}
|
|
len += seq_printf(m, "\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sba_proc_bitmap_open(struct inode *i, struct file *f)
|
|
{
|
|
return single_open(f, &sba_proc_bitmap_info, NULL);
|
|
}
|
|
|
|
static struct file_operations sba_proc_bitmap_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = sba_proc_bitmap_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
#endif /* CONFIG_PROC_FS */
|
|
|
|
static struct parisc_device_id sba_tbl[] = {
|
|
{ HPHW_IOA, HVERSION_REV_ANY_ID, ASTRO_RUNWAY_PORT, 0xb },
|
|
{ HPHW_BCPORT, HVERSION_REV_ANY_ID, IKE_MERCED_PORT, 0xc },
|
|
{ HPHW_BCPORT, HVERSION_REV_ANY_ID, REO_MERCED_PORT, 0xc },
|
|
{ HPHW_BCPORT, HVERSION_REV_ANY_ID, REOG_MERCED_PORT, 0xc },
|
|
{ HPHW_IOA, HVERSION_REV_ANY_ID, PLUTO_MCKINLEY_PORT, 0xc },
|
|
{ 0, }
|
|
};
|
|
|
|
int sba_driver_callback(struct parisc_device *);
|
|
|
|
static struct parisc_driver sba_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = sba_tbl,
|
|
.probe = sba_driver_callback,
|
|
};
|
|
|
|
/*
|
|
** Determine if sba should claim this chip (return 0) or not (return 1).
|
|
** If so, initialize the chip and tell other partners in crime they
|
|
** have work to do.
|
|
*/
|
|
int
|
|
sba_driver_callback(struct parisc_device *dev)
|
|
{
|
|
struct sba_device *sba_dev;
|
|
u32 func_class;
|
|
int i;
|
|
char *version;
|
|
void __iomem *sba_addr = ioremap_nocache(dev->hpa.start, SBA_FUNC_SIZE);
|
|
struct proc_dir_entry *info_entry, *bitmap_entry, *root;
|
|
|
|
sba_dump_ranges(sba_addr);
|
|
|
|
/* Read HW Rev First */
|
|
func_class = READ_REG(sba_addr + SBA_FCLASS);
|
|
|
|
if (IS_ASTRO(&dev->id)) {
|
|
unsigned long fclass;
|
|
static char astro_rev[]="Astro ?.?";
|
|
|
|
/* Astro is broken...Read HW Rev First */
|
|
fclass = READ_REG(sba_addr);
|
|
|
|
astro_rev[6] = '1' + (char) (fclass & 0x7);
|
|
astro_rev[8] = '0' + (char) ((fclass & 0x18) >> 3);
|
|
version = astro_rev;
|
|
|
|
} else if (IS_IKE(&dev->id)) {
|
|
static char ike_rev[] = "Ike rev ?";
|
|
ike_rev[8] = '0' + (char) (func_class & 0xff);
|
|
version = ike_rev;
|
|
} else if (IS_PLUTO(&dev->id)) {
|
|
static char pluto_rev[]="Pluto ?.?";
|
|
pluto_rev[6] = '0' + (char) ((func_class & 0xf0) >> 4);
|
|
pluto_rev[8] = '0' + (char) (func_class & 0x0f);
|
|
version = pluto_rev;
|
|
} else {
|
|
static char reo_rev[] = "REO rev ?";
|
|
reo_rev[8] = '0' + (char) (func_class & 0xff);
|
|
version = reo_rev;
|
|
}
|
|
|
|
if (!global_ioc_cnt) {
|
|
global_ioc_cnt = count_parisc_driver(&sba_driver);
|
|
|
|
/* Astro and Pluto have one IOC per SBA */
|
|
if ((!IS_ASTRO(&dev->id)) || (!IS_PLUTO(&dev->id)))
|
|
global_ioc_cnt *= 2;
|
|
}
|
|
|
|
printk(KERN_INFO "%s found %s at 0x%lx\n",
|
|
MODULE_NAME, version, dev->hpa.start);
|
|
|
|
sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
|
|
if (!sba_dev) {
|
|
printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
parisc_set_drvdata(dev, sba_dev);
|
|
|
|
for(i=0; i<MAX_IOC; i++)
|
|
spin_lock_init(&(sba_dev->ioc[i].res_lock));
|
|
|
|
sba_dev->dev = dev;
|
|
sba_dev->hw_rev = func_class;
|
|
sba_dev->iodc = &dev->id;
|
|
sba_dev->name = dev->name;
|
|
sba_dev->sba_hpa = sba_addr;
|
|
|
|
sba_get_pat_resources(sba_dev);
|
|
sba_hw_init(sba_dev);
|
|
sba_common_init(sba_dev);
|
|
|
|
hppa_dma_ops = &sba_ops;
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
switch (dev->id.hversion) {
|
|
case PLUTO_MCKINLEY_PORT:
|
|
root = proc_mckinley_root;
|
|
break;
|
|
case ASTRO_RUNWAY_PORT:
|
|
case IKE_MERCED_PORT:
|
|
default:
|
|
root = proc_runway_root;
|
|
break;
|
|
}
|
|
|
|
info_entry = create_proc_entry("sba_iommu", 0, root);
|
|
bitmap_entry = create_proc_entry("sba_iommu-bitmap", 0, root);
|
|
|
|
if (info_entry)
|
|
info_entry->proc_fops = &sba_proc_fops;
|
|
|
|
if (bitmap_entry)
|
|
bitmap_entry->proc_fops = &sba_proc_bitmap_fops;
|
|
#endif
|
|
|
|
parisc_vmerge_boundary = IOVP_SIZE;
|
|
parisc_vmerge_max_size = IOVP_SIZE * BITS_PER_LONG;
|
|
parisc_has_iommu();
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
** One time initialization to let the world know the SBA was found.
|
|
** This is the only routine which is NOT static.
|
|
** Must be called exactly once before pci_init().
|
|
*/
|
|
void __init sba_init(void)
|
|
{
|
|
register_parisc_driver(&sba_driver);
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_get_iommu - Assign the iommu pointer for the pci bus controller.
|
|
* @dev: The parisc device.
|
|
*
|
|
* Returns the appropriate IOMMU data for the given parisc PCI controller.
|
|
* This is cached and used later for PCI DMA Mapping.
|
|
*/
|
|
void * sba_get_iommu(struct parisc_device *pci_hba)
|
|
{
|
|
struct parisc_device *sba_dev = parisc_parent(pci_hba);
|
|
struct sba_device *sba = sba_dev->dev.driver_data;
|
|
char t = sba_dev->id.hw_type;
|
|
int iocnum = (pci_hba->hw_path >> 3); /* rope # */
|
|
|
|
WARN_ON((t != HPHW_IOA) && (t != HPHW_BCPORT));
|
|
|
|
return &(sba->ioc[iocnum]);
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_directed_lmmio - return first directed LMMIO range routed to rope
|
|
* @pa_dev: The parisc device.
|
|
* @r: resource PCI host controller wants start/end fields assigned.
|
|
*
|
|
* For the given parisc PCI controller, determine if any direct ranges
|
|
* are routed down the corresponding rope.
|
|
*/
|
|
void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
|
|
{
|
|
struct parisc_device *sba_dev = parisc_parent(pci_hba);
|
|
struct sba_device *sba = sba_dev->dev.driver_data;
|
|
char t = sba_dev->id.hw_type;
|
|
int i;
|
|
int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
|
|
|
|
BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
|
|
|
|
r->start = r->end = 0;
|
|
|
|
/* Astro has 4 directed ranges. Not sure about Ike/Pluto/et al */
|
|
for (i=0; i<4; i++) {
|
|
int base, size;
|
|
void __iomem *reg = sba->sba_hpa + i*0x18;
|
|
|
|
base = READ_REG32(reg + LMMIO_DIRECT0_BASE);
|
|
if ((base & 1) == 0)
|
|
continue; /* not enabled */
|
|
|
|
size = READ_REG32(reg + LMMIO_DIRECT0_ROUTE);
|
|
|
|
if ((size & (ROPES_PER_IOC-1)) != rope)
|
|
continue; /* directed down different rope */
|
|
|
|
r->start = (base & ~1UL) | PCI_F_EXTEND;
|
|
size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
|
|
r->end = r->start + size;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* sba_distributed_lmmio - return portion of distributed LMMIO range
|
|
* @pa_dev: The parisc device.
|
|
* @r: resource PCI host controller wants start/end fields assigned.
|
|
*
|
|
* For the given parisc PCI controller, return portion of distributed LMMIO
|
|
* range. The distributed LMMIO is always present and it's just a question
|
|
* of the base address and size of the range.
|
|
*/
|
|
void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
|
|
{
|
|
struct parisc_device *sba_dev = parisc_parent(pci_hba);
|
|
struct sba_device *sba = sba_dev->dev.driver_data;
|
|
char t = sba_dev->id.hw_type;
|
|
int base, size;
|
|
int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
|
|
|
|
BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));
|
|
|
|
r->start = r->end = 0;
|
|
|
|
base = READ_REG32(sba->sba_hpa + LMMIO_DIST_BASE);
|
|
if ((base & 1) == 0) {
|
|
BUG(); /* Gah! Distr Range wasn't enabled! */
|
|
return;
|
|
}
|
|
|
|
r->start = (base & ~1UL) | PCI_F_EXTEND;
|
|
|
|
size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
|
|
r->start += rope * (size + 1); /* adjust base for this rope */
|
|
r->end = r->start + size;
|
|
}
|