forked from luck/tmp_suning_uos_patched
b504882da5
Freescale high-speed USB SOC can be found on some Freescale processors among different architectures. It supports both host and device functions. This driver adds its device support for Linux USB Gadget layer. It is tested on MPC8349 and MPC8313, but should work on other platforms with minor tweaks. The driver passed USBCV 1.3 compliance tests. Note that this driver doesn't yet include OTG support. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <tanya.jiang@freescale.com> Signed-off-by: Bruce Schmid <duck@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
35 lines
1.0 KiB
Makefile
35 lines
1.0 KiB
Makefile
#
|
|
# USB peripheral controller drivers
|
|
#
|
|
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
|
|
obj-$(CONFIG_USB_NET2280) += net2280.o
|
|
obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
|
|
obj-$(CONFIG_USB_GOKU) += goku_udc.o
|
|
obj-$(CONFIG_USB_OMAP) += omap_udc.o
|
|
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
|
|
obj-$(CONFIG_USB_AT91) += at91_udc.o
|
|
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
|
|
|
|
#
|
|
# USB gadget drivers
|
|
#
|
|
g_zero-objs := zero.o usbstring.o config.o epautoconf.o
|
|
g_ether-objs := ether.o usbstring.o config.o epautoconf.o
|
|
g_serial-objs := serial.o usbstring.o config.o epautoconf.o
|
|
g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o
|
|
gadgetfs-objs := inode.o
|
|
g_file_storage-objs := file_storage.o usbstring.o config.o \
|
|
epautoconf.o
|
|
|
|
ifeq ($(CONFIG_USB_ETH_RNDIS),y)
|
|
g_ether-objs += rndis.o
|
|
endif
|
|
|
|
obj-$(CONFIG_USB_ZERO) += g_zero.o
|
|
obj-$(CONFIG_USB_ETH) += g_ether.o
|
|
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
|
|
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
|
|
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
|
|
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
|
|
|