forked from luck/tmp_suning_uos_patched
8a0427d192
Applications can submit a set of commands in one packet to the kernel, and in some cases it is required such as reading the temperature sensor results. This adds an option W1_CN_BUNDLE to the flags of cn_msg to request the kernel to reply in one packet for efficiency. The cn_msg flags now check for unknown flag values and return an error if one is seen. See "Proper handling of unknown flags in system calls" http://lwn.net/Articles/588444/ This corrects the ack values returned as per the protocol standard, namely the original ack for status messages and seq + 1 for all others such as the data returned from a read. Some of the common variable names have been standardized as follows. struct cn_msg *cn struct w1_netlink_msg *msg struct w1_netlink_cmd *cmd struct w1_master *dev When an argument and a function scope variable would collide, add req_ to the argument. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
189 lines
7.0 KiB
Plaintext
189 lines
7.0 KiB
Plaintext
/*****************************************/
|
|
Kernel Connector.
|
|
/*****************************************/
|
|
|
|
Kernel connector - new netlink based userspace <-> kernel space easy
|
|
to use communication module.
|
|
|
|
The Connector driver makes it easy to connect various agents using a
|
|
netlink based network. One must register a callback and an identifier.
|
|
When the driver receives a special netlink message with the appropriate
|
|
identifier, the appropriate callback will be called.
|
|
|
|
From the userspace point of view it's quite straightforward:
|
|
|
|
socket();
|
|
bind();
|
|
send();
|
|
recv();
|
|
|
|
But if kernelspace wants to use the full power of such connections, the
|
|
driver writer must create special sockets, must know about struct sk_buff
|
|
handling, etc... The Connector driver allows any kernelspace agents to use
|
|
netlink based networking for inter-process communication in a significantly
|
|
easier way:
|
|
|
|
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
|
|
void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
|
|
void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
|
|
|
|
struct cb_id
|
|
{
|
|
__u32 idx;
|
|
__u32 val;
|
|
};
|
|
|
|
idx and val are unique identifiers which must be registered in the
|
|
connector.h header for in-kernel usage. void (*callback) (void *) is a
|
|
callback function which will be called when a message with above idx.val
|
|
is received by the connector core. The argument for that function must
|
|
be dereferenced to struct cn_msg *.
|
|
|
|
struct cn_msg
|
|
{
|
|
struct cb_id id;
|
|
|
|
__u32 seq;
|
|
__u32 ack;
|
|
|
|
__u32 len; /* Length of the following data */
|
|
__u8 data[0];
|
|
};
|
|
|
|
/*****************************************/
|
|
Connector interfaces.
|
|
/*****************************************/
|
|
|
|
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
|
|
|
|
Registers new callback with connector core.
|
|
|
|
struct cb_id *id - unique connector's user identifier.
|
|
It must be registered in connector.h for legal in-kernel users.
|
|
char *name - connector's callback symbolic name.
|
|
void (*callback) (struct cn..) - connector's callback.
|
|
cn_msg and the sender's credentials
|
|
|
|
|
|
void cn_del_callback(struct cb_id *id);
|
|
|
|
Unregisters new callback with connector core.
|
|
|
|
struct cb_id *id - unique connector's user identifier.
|
|
|
|
|
|
int cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __groups, int gfp_mask);
|
|
int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __groups, int gfp_mask);
|
|
|
|
Sends message to the specified groups. It can be safely called from
|
|
softirq context, but may silently fail under strong memory pressure.
|
|
If there are no listeners for given group -ESRCH can be returned.
|
|
|
|
struct cn_msg * - message header(with attached data).
|
|
u16 len - for *_multi multiple cn_msg messages can be sent
|
|
u32 port - destination port.
|
|
If non-zero the message will be sent to the
|
|
given port, which should be set to the
|
|
original sender.
|
|
u32 __group - destination group.
|
|
If port and __group is zero, then appropriate group will
|
|
be searched through all registered connector users,
|
|
and message will be delivered to the group which was
|
|
created for user with the same ID as in msg.
|
|
If __group is not zero, then message will be delivered
|
|
to the specified group.
|
|
int gfp_mask - GFP mask.
|
|
|
|
Note: When registering new callback user, connector core assigns
|
|
netlink group to the user which is equal to its id.idx.
|
|
|
|
/*****************************************/
|
|
Protocol description.
|
|
/*****************************************/
|
|
|
|
The current framework offers a transport layer with fixed headers. The
|
|
recommended protocol which uses such a header is as following:
|
|
|
|
msg->seq and msg->ack are used to determine message genealogy. When
|
|
someone sends a message, they use a locally unique sequence and random
|
|
acknowledge number. The sequence number may be copied into
|
|
nlmsghdr->nlmsg_seq too.
|
|
|
|
The sequence number is incremented with each message sent.
|
|
|
|
If you expect a reply to the message, then the sequence number in the
|
|
received message MUST be the same as in the original message, and the
|
|
acknowledge number MUST be the same + 1.
|
|
|
|
If we receive a message and its sequence number is not equal to one we
|
|
are expecting, then it is a new message. If we receive a message and
|
|
its sequence number is the same as one we are expecting, but its
|
|
acknowledge is not equal to the sequence number in the original
|
|
message + 1, then it is a new message.
|
|
|
|
Obviously, the protocol header contains the above id.
|
|
|
|
The connector allows event notification in the following form: kernel
|
|
driver or userspace process can ask connector to notify it when
|
|
selected ids will be turned on or off (registered or unregistered its
|
|
callback). It is done by sending a special command to the connector
|
|
driver (it also registers itself with id={-1, -1}).
|
|
|
|
As example of this usage can be found in the cn_test.c module which
|
|
uses the connector to request notification and to send messages.
|
|
|
|
/*****************************************/
|
|
Reliability.
|
|
/*****************************************/
|
|
|
|
Netlink itself is not a reliable protocol. That means that messages can
|
|
be lost due to memory pressure or process' receiving queue overflowed,
|
|
so caller is warned that it must be prepared. That is why the struct
|
|
cn_msg [main connector's message header] contains u32 seq and u32 ack
|
|
fields.
|
|
|
|
/*****************************************/
|
|
Userspace usage.
|
|
/*****************************************/
|
|
|
|
2.6.14 has a new netlink socket implementation, which by default does not
|
|
allow people to send data to netlink groups other than 1.
|
|
So, if you wish to use a netlink socket (for example using connector)
|
|
with a different group number, the userspace application must subscribe to
|
|
that group first. It can be achieved by the following pseudocode:
|
|
|
|
s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
|
|
|
|
l_local.nl_family = AF_NETLINK;
|
|
l_local.nl_groups = 12345;
|
|
l_local.nl_pid = 0;
|
|
|
|
if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
|
|
perror("bind");
|
|
close(s);
|
|
return -1;
|
|
}
|
|
|
|
{
|
|
int on = l_local.nl_groups;
|
|
setsockopt(s, 270, 1, &on, sizeof(on));
|
|
}
|
|
|
|
Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
|
|
option. To drop a multicast subscription, one should call the above socket
|
|
option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
|
|
|
|
2.6.14 netlink code only allows to select a group which is less or equal to
|
|
the maximum group number, which is used at netlink_kernel_create() time.
|
|
In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
|
|
group number 12345, you must increment CN_NETLINK_USERS to that number.
|
|
Additional 0xf numbers are allocated to be used by non-in-kernel users.
|
|
|
|
Due to this limitation, group 0xffffffff does not work now, so one can
|
|
not use add/remove connector's group notifications, but as far as I know,
|
|
only cn_test.c test module used it.
|
|
|
|
Some work in netlink area is still being done, so things can be changed in
|
|
2.6.15 timeframe, if it will happen, documentation will be updated for that
|
|
kernel.
|