kernel_optimize_test/arch/arm/mach-orion5x/wrt350n-v2-setup.c
Arnd Bergmann c22c2c6008 ARM: orion5x: clean up mach/*.h headers
This is a simple move of all header files that are no longer
included by anything else from the include/mach directory
to the platform directory itself as preparation for
multiplatform support.

The mach/uncompress.h headers are left in place for now,
and are mildly modified to be independent of the other
headers. They will be removed entirely when ARCH_MULTIPLATFORM
gets enabled and they become obsolete.

Rather than updating the path names inside of the comments
of each header, I delete those comments to avoid having to
update them again, should they get moved or copied another
time.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-07 18:17:48 +01:00

274 lines
6.1 KiB
C

/*
* arch/arm/mach-orion5x/wrt350n-v2-setup.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include "orion5x.h"
#include "common.h"
#include "mpp.h"
/*
* LEDs attached to GPIO
*/
static struct gpio_led wrt350n_v2_led_pins[] = {
{
.name = "wrt350nv2:green:power",
.gpio = 0,
.active_low = 1,
}, {
.name = "wrt350nv2:green:security",
.gpio = 1,
.active_low = 1,
}, {
.name = "wrt350nv2:orange:power",
.gpio = 5,
.active_low = 1,
}, {
.name = "wrt350nv2:green:usb",
.gpio = 6,
.active_low = 1,
}, {
.name = "wrt350nv2:green:wireless",
.gpio = 7,
.active_low = 1,
},
};
static struct gpio_led_platform_data wrt350n_v2_led_data = {
.leds = wrt350n_v2_led_pins,
.num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
};
static struct platform_device wrt350n_v2_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wrt350n_v2_led_data,
},
};
/*
* Buttons attached to GPIO
*/
static struct gpio_keys_button wrt350n_v2_buttons[] = {
{
.code = KEY_RESTART,
.gpio = 3,
.desc = "Reset Button",
.active_low = 1,
}, {
.code = KEY_WPS_BUTTON,
.gpio = 2,
.desc = "WPS Button",
.active_low = 1,
},
};
static struct gpio_keys_platform_data wrt350n_v2_button_data = {
.buttons = wrt350n_v2_buttons,
.nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
};
static struct platform_device wrt350n_v2_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &wrt350n_v2_button_data,
},
};
/*
* General setup
*/
static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
MPP0_GPIO, /* Power LED green (0=on) */
MPP1_GPIO, /* Security LED (0=on) */
MPP2_GPIO, /* Internal Button (0=on) */
MPP3_GPIO, /* Reset Button (0=on) */
MPP4_GPIO, /* PCI int */
MPP5_GPIO, /* Power LED orange (0=on) */
MPP6_GPIO, /* USB LED (0=on) */
MPP7_GPIO, /* Wireless LED (0=on) */
MPP8_UNUSED, /* ??? */
MPP9_GIGE, /* GE_RXERR */
MPP10_UNUSED, /* ??? */
MPP11_UNUSED, /* ??? */
MPP12_GIGE, /* GE_TXD[4] */
MPP13_GIGE, /* GE_TXD[5] */
MPP14_GIGE, /* GE_TXD[6] */
MPP15_GIGE, /* GE_TXD[7] */
MPP16_GIGE, /* GE_RXD[4] */
MPP17_GIGE, /* GE_RXD[5] */
MPP18_GIGE, /* GE_RXD[6] */
MPP19_GIGE, /* GE_RXD[7] */
0,
};
/*
* 8M NOR flash Device bus boot chip select
*/
#define WRT350N_V2_NOR_BOOT_BASE 0xf4000000
#define WRT350N_V2_NOR_BOOT_SIZE SZ_8M
static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
{
.name = "kernel",
.offset = 0x00000000,
.size = 0x00760000,
}, {
.name = "rootfs",
.offset = 0x001a0000,
.size = 0x005c0000,
}, {
.name = "lang",
.offset = 0x00760000,
.size = 0x00040000,
}, {
.name = "nvram",
.offset = 0x007a0000,
.size = 0x00020000,
}, {
.name = "u-boot",
.offset = 0x007c0000,
.size = 0x00040000,
},
};
static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
.width = 1,
.parts = wrt350n_v2_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
};
static struct resource wrt350n_v2_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = WRT350N_V2_NOR_BOOT_BASE,
.end = WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
};
static struct platform_device wrt350n_v2_nor_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &wrt350n_v2_nor_flash_data,
},
.num_resources = 1,
.resource = &wrt350n_v2_nor_flash_resource,
};
static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
.port_names[3] = "cpu",
.port_names[5] = "lan3",
.port_names[7] = "lan4",
};
static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
.nr_chips = 1,
.chip = &wrt350n_v2_switch_chip_data,
};
static void __init wrt350n_v2_init(void)
{
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
orion5x_mpp_conf(wrt350n_v2_mpp_modes);
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_eth_init(&wrt350n_v2_eth_data);
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
WRT350N_V2_NOR_BOOT_BASE,
WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
platform_device_register(&wrt350n_v2_leds);
platform_device_register(&wrt350n_v2_button_device);
}
static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
int irq;
/*
* Check for devices with hard-wired IRQs.
*/
irq = orion5x_pci_map_irq(dev, slot, pin);
if (irq != -1)
return irq;
/*
* Mini-PCI slot.
*/
if (slot == 7)
return gpio_to_irq(4);
return -1;
}
static struct hw_pci wrt350n_v2_pci __initdata = {
.nr_controllers = 2,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
.map_irq = wrt350n_v2_pci_map_irq,
};
static int __init wrt350n_v2_pci_init(void)
{
if (machine_is_wrt350n_v2())
pci_common_init(&wrt350n_v2_pci);
return 0;
}
subsys_initcall(wrt350n_v2_pci_init);
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = ORION5X_NR_IRQS,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.init_time = orion5x_timer_init,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END