AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
303760b44a
kernel_optimize_test/drivers/hwmon/pc87360.c
Jean Delvare 303760b44a [PATCH] hwmon: hwmon vs i2c, second round (07/11) 
The only part left in i2c-sensor is the VRM/VRD/VID handling code.
This is in no way related to i2c, so it doesn't belong there. Move
the code to hwmon, where it belongs.

Note that not all hardware monitoring drivers do VRM/VRD/VID
operations, so less drivers depend on hwmon-vid than there were
depending on i2c-sensor.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:22 -07:00

1340 lines
42 KiB
C
Raw Blame History

/*
* pc87360.c - Part of lm_sensors, Linux kernel modules
* for hardware monitoring
* Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
*
* Copied from smsc47m1.c:
* Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Supports the following chips:
*
* Chip #vin #fan #pwm #temp devid
* PC87360 - 2 2 - 0xE1
* PC87363 - 2 2 - 0xE8
* PC87364 - 3 3 - 0xE4
* PC87365 11 3 3 2 0xE5
* PC87366 11 3 3 3-4 0xE9
*
* This driver assumes that no more than one chip is present, and one of
* the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <asm/io.h>
static u8 devid;
static unsigned short address;
static unsigned short extra_isa[3];
static u8 confreg[4];
enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 };
static int init = 1;
module_param(init, int, 0);
MODULE_PARM_DESC(init,
"Chip initialization level:\n"
" 0: None\n"
"*1: Forcibly enable internal voltage and temperature channels, except in9\n"
" 2: Forcibly enable all voltage and temperature channels, except in9\n"
" 3: Forcibly enable all voltage and temperature channels, including in9");
/*
* Super-I/O registers and operations
*/
#define DEV 0x07 /* Register: Logical device select */
#define DEVID 0x20 /* Register: Device ID */
#define ACT 0x30 /* Register: Device activation */
#define BASE 0x60 /* Register: Base address */
#define FSCM 0x09 /* Logical device: fans */
#define VLM 0x0d /* Logical device: voltages */
#define TMS 0x0e /* Logical device: temperatures */
static const u8 logdev[3] = { FSCM, VLM, TMS };
#define LD_FAN 0
#define LD_IN 1
#define LD_TEMP 2
static inline void superio_outb(int sioaddr, int reg, int val)
{
outb(reg, sioaddr);
outb(val, sioaddr+1);
}
static inline int superio_inb(int sioaddr, int reg)
{
outb(reg, sioaddr);
return inb(sioaddr+1);
}
static inline void superio_exit(int sioaddr)
{
outb(0x02, sioaddr);
outb(0x02, sioaddr+1);
}
/*
* Logical devices
*/
#define PC87360_EXTENT 0x10
#define PC87365_REG_BANK 0x09
#define NO_BANK 0xff
/*
* Fan registers and conversions
*/
/* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */
#define PC87360_REG_PRESCALE(nr) (0x00 + 2 * (nr))
#define PC87360_REG_PWM(nr) (0x01 + 2 * (nr))
#define PC87360_REG_FAN_MIN(nr) (0x06 + 3 * (nr))
#define PC87360_REG_FAN(nr) (0x07 + 3 * (nr))
#define PC87360_REG_FAN_STATUS(nr) (0x08 + 3 * (nr))
#define FAN_FROM_REG(val,div) ((val) == 0 ? 0: \
480000 / ((val)*(div)))
#define FAN_TO_REG(val,div) ((val) <= 100 ? 0 : \
480000 / ((val)*(div)))
#define FAN_DIV_FROM_REG(val) (1 << ((val >> 5) & 0x03))
#define FAN_STATUS_FROM_REG(val) ((val) & 0x07)
#define FAN_CONFIG_MONITOR(val,nr) (((val) >> (2 + nr * 3)) & 1)
#define FAN_CONFIG_CONTROL(val,nr) (((val) >> (3 + nr * 3)) & 1)
#define FAN_CONFIG_INVERT(val,nr) (((val) >> (4 + nr * 3)) & 1)
#define PWM_FROM_REG(val,inv) ((inv) ? 255 - (val) : (val))
static inline u8 PWM_TO_REG(int val, int inv)
{
if (inv)
val = 255 - val;
if (val < 0)
return 0;
if (val > 255)
return 255;
return val;
}
/*
* Voltage registers and conversions
*/
#define PC87365_REG_IN_CONVRATE 0x07
#define PC87365_REG_IN_CONFIG 0x08
#define PC87365_REG_IN 0x0B
#define PC87365_REG_IN_MIN 0x0D
#define PC87365_REG_IN_MAX 0x0C
#define PC87365_REG_IN_STATUS 0x0A
#define PC87365_REG_IN_ALARMS1 0x00
#define PC87365_REG_IN_ALARMS2 0x01
#define PC87365_REG_VID 0x06
#define IN_FROM_REG(val,ref) (((val) * (ref) + 128) / 256)
#define IN_TO_REG(val,ref) ((val) < 0 ? 0 : \
(val)*256 >= (ref)*255 ? 255: \
((val) * 256 + (ref)/2) / (ref))
/*
* Temperature registers and conversions
*/
#define PC87365_REG_TEMP_CONFIG 0x08
#define PC87365_REG_TEMP 0x0B
#define PC87365_REG_TEMP_MIN 0x0D
#define PC87365_REG_TEMP_MAX 0x0C
#define PC87365_REG_TEMP_CRIT 0x0E
#define PC87365_REG_TEMP_STATUS 0x0A
#define PC87365_REG_TEMP_ALARMS 0x00
#define TEMP_FROM_REG(val) ((val) * 1000)
#define TEMP_TO_REG(val) ((val) < -55000 ? -55 : \
(val) > 127000 ? 127 : \
(val) < 0 ? ((val) - 500) / 1000 : \
((val) + 500) / 1000)
/*
* Client data (each client gets its own)
*/
struct pc87360_data {
struct i2c_client client;
struct class_device *class_dev;
struct semaphore lock;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
int address[3];
u8 fannr, innr, tempnr;
u8 fan[3]; /* Register value */
u8 fan_min[3]; /* Register value */
u8 fan_status[3]; /* Register value */
u8 pwm[3]; /* Register value */
u16 fan_conf; /* Configuration register values, combined */
u16 in_vref; /* 1 mV/bit */
u8 in[14]; /* Register value */
u8 in_min[14]; /* Register value */
u8 in_max[14]; /* Register value */
u8 in_crit[3]; /* Register value */
u8 in_status[14]; /* Register value */
u16 in_alarms; /* Register values, combined, masked */
u8 vid_conf; /* Configuration register value */
u8 vrm;
u8 vid; /* Register value */
s8 temp[3]; /* Register value */
s8 temp_min[3]; /* Register value */
s8 temp_max[3]; /* Register value */
s8 temp_crit[3]; /* Register value */
u8 temp_status[3]; /* Register value */
u8 temp_alarms; /* Register value, masked */
};
/*
* Functions declaration
*/
static int pc87360_detect(struct i2c_adapter *adapter);
static int pc87360_detach_client(struct i2c_client *client);
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg);
static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg, u8 value);
static void pc87360_init_client(struct i2c_client *client, int use_thermistors);
static struct pc87360_data *pc87360_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
static struct i2c_driver pc87360_driver = {
.owner = THIS_MODULE,
.name = "pc87360",
.attach_adapter = pc87360_detect,
.detach_client = pc87360_detach_client,
};
/*
* Sysfs stuff
*/
static ssize_t set_fan_min(struct device *dev, const char *buf,
size_t count, int nr)
{
struct i2c_client *client = to_i2c_client(dev);
struct pc87360_data *data = i2c_get_clientdata(client);
long fan_min = simple_strtol(buf, NULL, 10);
down(&data->update_lock);
fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr]));
/* If it wouldn't fit, change clock divisor */
while (fan_min > 255
&& (data->fan_status[nr] & 0x60) != 0x60) {
fan_min >>= 1;
data->fan[nr] >>= 1;
data->fan_status[nr] += 0x20;
}
data->fan_min[nr] = fan_min > 255 ? 255 : fan_min;
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr),
data->fan_min[nr]);
/* Write new divider, preserve alarm bits */
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr),
data->fan_status[nr] & 0xF9);
up(&data->update_lock);
return count;
}
#define show_and_set_fan(offset) \
static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \
FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
} \
static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \
FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \
} \
static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", \
FAN_DIV_FROM_REG(data->fan_status[offset-1])); \
} \
static ssize_t show_fan##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", \
FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \
} \
static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
return set_fan_min(dev, buf, count, offset-1); \
} \
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
show_fan##offset##_input, NULL); \
static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \
show_fan##offset##_min, set_fan##offset##_min); \
static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
show_fan##offset##_div, NULL); \
static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \
show_fan##offset##_status, NULL);
show_and_set_fan(1)
show_and_set_fan(2)
show_and_set_fan(3)
#define show_and_set_pwm(offset) \
static ssize_t show_pwm##offset(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", \
PWM_FROM_REG(data->pwm[offset-1], \
FAN_CONFIG_INVERT(data->fan_conf, \
offset-1))); \
} \
static ssize_t set_pwm##offset(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->pwm[offset-1] = PWM_TO_REG(val, \
FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \
data->pwm[offset-1]); \
up(&data->update_lock); \
return count; \
} \
static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \
show_pwm##offset, set_pwm##offset);
show_and_set_pwm(1)
show_and_set_pwm(2)
show_and_set_pwm(3)
#define show_and_set_in(offset) \
static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
data->in_vref)); \
} \
static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
data->in_vref)); \
} \
static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
data->in_vref)); \
} \
static ssize_t show_in##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", data->in_status[offset]); \
} \
static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->in_min[offset] = IN_TO_REG(val, data->in_vref); \
pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \
data->in_min[offset]); \
up(&data->update_lock); \
return count; \
} \
static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->in_max[offset] = IN_TO_REG(val, \
data->in_vref); \
pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \
data->in_max[offset]); \
up(&data->update_lock); \
return count; \
} \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
show_in##offset##_input, NULL); \
static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
show_in##offset##_min, set_in##offset##_min); \
static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
show_in##offset##_max, set_in##offset##_max); \
static DEVICE_ATTR(in##offset##_status, S_IRUGO, \
show_in##offset##_status, NULL);
show_and_set_in(0)
show_and_set_in(1)
show_and_set_in(2)
show_and_set_in(3)
show_and_set_in(4)
show_and_set_in(5)
show_and_set_in(6)
show_and_set_in(7)
show_and_set_in(8)
show_and_set_in(9)
show_and_set_in(10)
#define show_and_set_therm(offset) \
static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \
data->in_vref)); \
} \
static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \
data->in_vref)); \
} \
static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \
data->in_vref)); \
} \
static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \
data->in_vref)); \
} \
static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%u\n", data->in_status[offset+7]); \
} \
static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \
pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \
data->in_min[offset+7]); \
up(&data->update_lock); \
return count; \
} \
static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \
pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \
data->in_max[offset+7]); \
up(&data->update_lock); \
return count; \
} \
static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \
pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \
data->in_crit[offset-4]); \
up(&data->update_lock); \
return count; \
} \
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
show_temp##offset##_input, NULL); \
static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
show_temp##offset##_min, set_temp##offset##_min); \
static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
show_temp##offset##_max, set_temp##offset##_max); \
static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
show_temp##offset##_crit, set_temp##offset##_crit); \
static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
show_temp##offset##_status, NULL);
show_and_set_therm(4)
show_and_set_therm(5)
show_and_set_therm(6)
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct pc87360_data *data = pc87360_update_device(dev);
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct pc87360_data *data = pc87360_update_device(dev);
return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct pc87360_data *data = i2c_get_clientdata(client);
data->vrm = simple_strtoul(buf, NULL, 10);
return count;
}
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct pc87360_data *data = pc87360_update_device(dev);
return sprintf(buf, "%u\n", data->in_alarms);
}
static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL);
#define show_and_set_temp(offset) \
static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
} \
static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
} \
static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
}\
static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \
}\
static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct pc87360_data *data = pc87360_update_device(dev); \
return sprintf(buf, "%d\n", data->temp_status[offset-1]); \
}\
static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->temp_min[offset-1] = TEMP_TO_REG(val); \
pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \
data->temp_min[offset-1]); \
up(&data->update_lock); \
return count; \
} \
static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->temp_max[offset-1] = TEMP_TO_REG(val); \
pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \
data->temp_max[offset-1]); \
up(&data->update_lock); \
return count; \
} \
static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct pc87360_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->temp_crit[offset-1] = TEMP_TO_REG(val); \
pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \
data->temp_crit[offset-1]); \
up(&data->update_lock); \
return count; \
} \
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
show_temp##offset##_input, NULL); \
static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
show_temp##offset##_min, set_temp##offset##_min); \
static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
show_temp##offset##_max, set_temp##offset##_max); \
static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
show_temp##offset##_crit, set_temp##offset##_crit); \
static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
show_temp##offset##_status, NULL);
show_and_set_temp(1)
show_and_set_temp(2)
show_and_set_temp(3)
static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct pc87360_data *data = pc87360_update_device(dev);
return sprintf(buf, "%u\n", data->temp_alarms);
}
static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL);
/*
* Device detection, registration and update
*/
static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses)
{
u16 val;
int i;
int nrdev; /* logical device count */
/* No superio_enter */
/* Identify device */
val = superio_inb(sioaddr, DEVID);
switch (val) {
case 0xE1: /* PC87360 */
case 0xE8: /* PC87363 */
case 0xE4: /* PC87364 */
nrdev = 1;
break;
case 0xE5: /* PC87365 */
case 0xE9: /* PC87366 */
nrdev = 3;
break;
default:
superio_exit(sioaddr);
return -ENODEV;
}
/* Remember the device id */
*devid = val;
for (i = 0; i < nrdev; i++) {
/* select logical device */
superio_outb(sioaddr, DEV, logdev[i]);
val = superio_inb(sioaddr, ACT);
if (!(val & 0x01)) {
printk(KERN_INFO "pc87360: Device 0x%02x not "
"activated\n", logdev[i]);
continue;
}
val = (superio_inb(sioaddr, BASE) << 8)
| superio_inb(sioaddr, BASE + 1);
if (!val) {
printk(KERN_INFO "pc87360: Base address not set for "
"device 0x%02x\n", logdev[i]);
continue;
}
addresses[i] = val;
if (i==0) { /* Fans */
confreg[0] = superio_inb(sioaddr, 0xF0);
confreg[1] = superio_inb(sioaddr, 0xF1);
#ifdef DEBUG
printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
"ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
(confreg[0]>>3)&1, (confreg[0]>>4)&1);
printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
"ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
(confreg[0]>>6)&1, (confreg[0]>>7)&1);
printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
"ctrl=%d inv=%d\n", confreg[1]&1,
(confreg[1]>>1)&1, (confreg[1]>>2)&1);
#endif
} else if (i==1) { /* Voltages */
/* Are we using thermistors? */
if (*devid == 0xE9) { /* PC87366 */
/* These registers are not logical-device
specific, just that we won't need them if
we don't use the VLM device */
confreg[2] = superio_inb(sioaddr, 0x2B);
confreg[3] = superio_inb(sioaddr, 0x25);
if (confreg[2] & 0x40) {
printk(KERN_INFO "pc87360: Using "
"thermistors for temperature "
"monitoring\n");
}
if (confreg[3] & 0xE0) {
printk(KERN_INFO "pc87360: VID "
"inputs routed (mode %u)\n",
confreg[3] >> 5);
}
}
}
}
superio_exit(sioaddr);
return 0;
}
static int pc87360_detect(struct i2c_adapter *adapter)
{
int i;
struct i2c_client *new_client;
struct pc87360_data *data;
int err = 0;
const char *name = "pc87360";
int use_thermistors = 0;
if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
return -ENOMEM;
memset(data, 0x00, sizeof(struct pc87360_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
init_MUTEX(&data->lock);
new_client->adapter = adapter;
new_client->driver = &pc87360_driver;
new_client->flags = 0;
data->fannr = 2;
data->innr = 0;
data->tempnr = 0;
switch (devid) {
case 0xe8:
name = "pc87363";
break;
case 0xe4:
name = "pc87364";
data->fannr = 3;
break;
case 0xe5:
name = "pc87365";
data->fannr = extra_isa[0] ? 3 : 0;
data->innr = extra_isa[1] ? 11 : 0;
data->tempnr = extra_isa[2] ? 2 : 0;
break;
case 0xe9:
name = "pc87366";
data->fannr = extra_isa[0] ? 3 : 0;
data->innr = extra_isa[1] ? 14 : 0;
data->tempnr = extra_isa[2] ? 3 : 0;
break;
}
strcpy(new_client->name, name);
data->valid = 0;
init_MUTEX(&data->update_lock);
for (i = 0; i < 3; i++) {
if (((data->address[i] = extra_isa[i]))
&& !request_region(extra_isa[i], PC87360_EXTENT,
pc87360_driver.name)) {
dev_err(&new_client->dev, "Region 0x%x-0x%x already "
"in use!\n", extra_isa[i],
extra_isa[i]+PC87360_EXTENT-1);
for (i--; i >= 0; i--)
release_region(extra_isa[i], PC87360_EXTENT);
err = -EBUSY;
goto ERROR1;
}
}
/* Retrieve the fans configuration from Super-I/O space */
if (data->fannr)
data->fan_conf = confreg[0] | (confreg[1] << 8);
if ((err = i2c_attach_client(new_client)))
goto ERROR2;
/* Use the correct reference voltage
Unless both the VLM and the TMS logical devices agree to
use an external Vref, the internal one is used. */
if (data->innr) {
i = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG);
if (data->tempnr) {
i &= pc87360_read_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG);
}
data->in_vref = (i&0x02) ? 3025 : 2966;
dev_dbg(&new_client->dev, "Using %s reference voltage\n",
(i&0x02) ? "external" : "internal");
data->vid_conf = confreg[3];
data->vrm = 90;
}
/* Fan clock dividers may be needed before any data is read */
for (i = 0; i < data->fannr; i++) {
if (FAN_CONFIG_MONITOR(data->fan_conf, i))
data->fan_status[i] = pc87360_read_value(data,
LD_FAN, NO_BANK,
PC87360_REG_FAN_STATUS(i));
}
if (init > 0) {
if (devid == 0xe9 && data->address[1]) /* PC87366 */
use_thermistors = confreg[2] & 0x40;
pc87360_init_client(new_client, use_thermistors);
}
/* Register sysfs hooks */
data->class_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR3;
}
if (data->innr) {
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
device_create_file(&new_client->dev, &dev_attr_in4_input);
device_create_file(&new_client->dev, &dev_attr_in5_input);
device_create_file(&new_client->dev, &dev_attr_in6_input);
device_create_file(&new_client->dev, &dev_attr_in7_input);
device_create_file(&new_client->dev, &dev_attr_in8_input);
device_create_file(&new_client->dev, &dev_attr_in9_input);
device_create_file(&new_client->dev, &dev_attr_in10_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
device_create_file(&new_client->dev, &dev_attr_in4_min);
device_create_file(&new_client->dev, &dev_attr_in5_min);
device_create_file(&new_client->dev, &dev_attr_in6_min);
device_create_file(&new_client->dev, &dev_attr_in7_min);
device_create_file(&new_client->dev, &dev_attr_in8_min);
device_create_file(&new_client->dev, &dev_attr_in9_min);
device_create_file(&new_client->dev, &dev_attr_in10_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
device_create_file(&new_client->dev, &dev_attr_in4_max);
device_create_file(&new_client->dev, &dev_attr_in5_max);
device_create_file(&new_client->dev, &dev_attr_in6_max);
device_create_file(&new_client->dev, &dev_attr_in7_max);
device_create_file(&new_client->dev, &dev_attr_in8_max);
device_create_file(&new_client->dev, &dev_attr_in9_max);
device_create_file(&new_client->dev, &dev_attr_in10_max);
device_create_file(&new_client->dev, &dev_attr_in0_status);
device_create_file(&new_client->dev, &dev_attr_in1_status);
device_create_file(&new_client->dev, &dev_attr_in2_status);
device_create_file(&new_client->dev, &dev_attr_in3_status);
device_create_file(&new_client->dev, &dev_attr_in4_status);
device_create_file(&new_client->dev, &dev_attr_in5_status);
device_create_file(&new_client->dev, &dev_attr_in6_status);
device_create_file(&new_client->dev, &dev_attr_in7_status);
device_create_file(&new_client->dev, &dev_attr_in8_status);
device_create_file(&new_client->dev, &dev_attr_in9_status);
device_create_file(&new_client->dev, &dev_attr_in10_status);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
device_create_file(&new_client->dev, &dev_attr_alarms_in);
}
if (data->tempnr) {
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp1_crit);
device_create_file(&new_client->dev, &dev_attr_temp2_crit);
device_create_file(&new_client->dev, &dev_attr_temp1_status);
device_create_file(&new_client->dev, &dev_attr_temp2_status);
device_create_file(&new_client->dev, &dev_attr_alarms_temp);
}
if (data->tempnr == 3) {
device_create_file(&new_client->dev, &dev_attr_temp3_input);
device_create_file(&new_client->dev, &dev_attr_temp3_min);
device_create_file(&new_client->dev, &dev_attr_temp3_max);
device_create_file(&new_client->dev, &dev_attr_temp3_crit);
device_create_file(&new_client->dev, &dev_attr_temp3_status);
}
if (data->innr == 14) {
device_create_file(&new_client->dev, &dev_attr_temp4_input);
device_create_file(&new_client->dev, &dev_attr_temp5_input);
device_create_file(&new_client->dev, &dev_attr_temp6_input);
device_create_file(&new_client->dev, &dev_attr_temp4_min);
device_create_file(&new_client->dev, &dev_attr_temp5_min);
device_create_file(&new_client->dev, &dev_attr_temp6_min);
device_create_file(&new_client->dev, &dev_attr_temp4_max);
device_create_file(&new_client->dev, &dev_attr_temp5_max);
device_create_file(&new_client->dev, &dev_attr_temp6_max);
device_create_file(&new_client->dev, &dev_attr_temp4_crit);
device_create_file(&new_client->dev, &dev_attr_temp5_crit);
device_create_file(&new_client->dev, &dev_attr_temp6_crit);
device_create_file(&new_client->dev, &dev_attr_temp4_status);
device_create_file(&new_client->dev, &dev_attr_temp5_status);
device_create_file(&new_client->dev, &dev_attr_temp6_status);
}
if (data->fannr) {
if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) {
device_create_file(&new_client->dev,
&dev_attr_fan1_input);
device_create_file(&new_client->dev,
&dev_attr_fan1_min);
device_create_file(&new_client->dev,
&dev_attr_fan1_div);
device_create_file(&new_client->dev,
&dev_attr_fan1_status);
}
if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) {
device_create_file(&new_client->dev,
&dev_attr_fan2_input);
device_create_file(&new_client->dev,
&dev_attr_fan2_min);
device_create_file(&new_client->dev,
&dev_attr_fan2_div);
device_create_file(&new_client->dev,
&dev_attr_fan2_status);
}
if (FAN_CONFIG_CONTROL(data->fan_conf, 0))
device_create_file(&new_client->dev, &dev_attr_pwm1);
if (FAN_CONFIG_CONTROL(data->fan_conf, 1))
device_create_file(&new_client->dev, &dev_attr_pwm2);
}
if (data->fannr == 3) {
if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) {
device_create_file(&new_client->dev,
&dev_attr_fan3_input);
device_create_file(&new_client->dev,
&dev_attr_fan3_min);
device_create_file(&new_client->dev,
&dev_attr_fan3_div);
device_create_file(&new_client->dev,
&dev_attr_fan3_status);
}
if (FAN_CONFIG_CONTROL(data->fan_conf, 2))
device_create_file(&new_client->dev, &dev_attr_pwm3);
}
return 0;
ERROR3:
i2c_detach_client(new_client);
ERROR2:
for (i = 0; i < 3; i++) {
if (data->address[i]) {
release_region(data->address[i], PC87360_EXTENT);
}
}
ERROR1:
kfree(data);
return err;
}
static int pc87360_detach_client(struct i2c_client *client)
{
struct pc87360_data *data = i2c_get_clientdata(client);
int i;
hwmon_device_unregister(data->class_dev);
if ((i = i2c_detach_client(client)))
return i;
for (i = 0; i < 3; i++) {
if (data->address[i]) {
release_region(data->address[i], PC87360_EXTENT);
}
}
kfree(data);
return 0;
}
/* ldi is the logical device index
bank is for voltages and temperatures only */
static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg)
{
int res;
down(&(data->lock));
if (bank != NO_BANK)
outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
res = inb_p(data->address[ldi] + reg);
up(&(data->lock));
return res;
}
static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg, u8 value)
{
down(&(data->lock));
if (bank != NO_BANK)
outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
outb_p(value, data->address[ldi] + reg);
up(&(data->lock));
}
static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
{
struct pc87360_data *data = i2c_get_clientdata(client);
int i, nr;
const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 };
const u8 init_temp[3] = { 2, 2, 1 };
u8 reg;
if (init >= 2 && data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE);
dev_info(&client->dev, "VLM conversion set to "
"1s period, 160us delay\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE,
(reg & 0xC0) | 0x11);
}
nr = data->innr < 11 ? data->innr : 11;
for (i=0; i<nr; i++) {
if (init >= init_in[i]) {
/* Forcibly enable voltage channel */
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
if (!(reg & 0x01)) {
dev_dbg(&client->dev, "Forcibly "
"enabling in%d\n", i);
pc87360_write_value(data, LD_IN, i,
PC87365_REG_IN_STATUS,
(reg & 0x68) | 0x87);
}
}
}
/* We can't blindly trust the Super-I/O space configuration bit,
most BIOS won't set it properly */
for (i=11; i<data->innr; i++) {
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_TEMP_STATUS);
use_thermistors = use_thermistors || (reg & 0x01);
}
i = use_thermistors ? 2 : 0;
for (; i<data->tempnr; i++) {
if (init >= init_temp[i]) {
/* Forcibly enable temperature channel */
reg = pc87360_read_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS);
if (!(reg & 0x01)) {
dev_dbg(&client->dev, "Forcibly "
"enabling temp%d\n", i+1);
pc87360_write_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS,
0xCF);
}
}
}
if (use_thermistors) {
for (i=11; i<data->innr; i++) {
if (init >= init_in[i]) {
/* The pin may already be used by thermal
diodes */
reg = pc87360_read_value(data, LD_TEMP,
(i-11)/2, PC87365_REG_TEMP_STATUS);
if (reg & 0x01) {
dev_dbg(&client->dev, "Skipping "
"temp%d, pin already in use "
"by temp%d\n", i-7, (i-11)/2);
continue;
}
/* Forcibly enable thermistor channel */
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
if (!(reg & 0x01)) {
dev_dbg(&client->dev, "Forcibly "
"enabling temp%d\n", i-7);
pc87360_write_value(data, LD_IN, i,
PC87365_REG_TEMP_STATUS,
(reg & 0x60) | 0x8F);
}
}
}
}
if (data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG);
if (reg & 0x01) {
dev_dbg(&client->dev, "Forcibly "
"enabling monitoring (VLM)\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG,
reg & 0xFE);
}
}
if (data->tempnr) {
reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG);
if (reg & 0x01) {
dev_dbg(&client->dev, "Forcibly enabling "
"monitoring (TMS)\n");
pc87360_write_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG,
reg & 0xFE);
}
if (init >= 2) {
/* Chip config as documented by National Semi. */
pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08);
/* We voluntarily omit the bank here, in case the
sequence itself matters. It shouldn't be a problem,
since nobody else is supposed to access the
device at that point. */
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04);
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35);
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05);
pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05);
}
}
}
static void pc87360_autodiv(struct i2c_client *client, int nr)
{
struct pc87360_data *data = i2c_get_clientdata(client);
u8 old_min = data->fan_min[nr];
/* Increase clock divider if needed and possible */
if ((data->fan_status[nr] & 0x04) /* overflow flag */
|| (data->fan[nr] >= 224)) { /* next to overflow */
if ((data->fan_status[nr] & 0x60) != 0x60) {
data->fan_status[nr] += 0x20;
data->fan_min[nr] >>= 1;
data->fan[nr] >>= 1;
dev_dbg(&client->dev, "Increasing "
"clock divider to %d for fan %d\n",
FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1);
}
} else {
/* Decrease clock divider if possible */
while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */
&& data->fan[nr] < 85 /* bad accuracy */
&& (data->fan_status[nr] & 0x60) != 0x00) {
data->fan_status[nr] -= 0x20;
data->fan_min[nr] <<= 1;
data->fan[nr] <<= 1;
dev_dbg(&client->dev, "Decreasing "
"clock divider to %d for fan %d\n",
FAN_DIV_FROM_REG(data->fan_status[nr]),
nr+1);
}
}
/* Write new fan min if it changed */
if (old_min != data->fan_min[nr]) {
pc87360_write_value(data, LD_FAN, NO_BANK,
PC87360_REG_FAN_MIN(nr),
data->fan_min[nr]);
}
}
static struct pc87360_data *pc87360_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pc87360_data *data = i2c_get_clientdata(client);
u8 i;
down(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Data update\n");
/* Fans */
for (i = 0; i < data->fannr; i++) {
if (FAN_CONFIG_MONITOR(data->fan_conf, i)) {
data->fan_status[i] =
pc87360_read_value(data, LD_FAN,
NO_BANK, PC87360_REG_FAN_STATUS(i));
data->fan[i] = pc87360_read_value(data, LD_FAN,
NO_BANK, PC87360_REG_FAN(i));
data->fan_min[i] = pc87360_read_value(data,
LD_FAN, NO_BANK,
PC87360_REG_FAN_MIN(i));
/* Change clock divider if needed */
pc87360_autodiv(client, i);
/* Clear bits and write new divider */
pc87360_write_value(data, LD_FAN, NO_BANK,
PC87360_REG_FAN_STATUS(i),
data->fan_status[i]);
}
if (FAN_CONFIG_CONTROL(data->fan_conf, i))
data->pwm[i] = pc87360_read_value(data, LD_FAN,
NO_BANK, PC87360_REG_PWM(i));
}
/* Voltages */
for (i = 0; i < data->innr; i++) {
data->in_status[i] = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
/* Clear bits */
pc87360_write_value(data, LD_IN, i,
PC87365_REG_IN_STATUS,
data->in_status[i]);
if ((data->in_status[i] & 0x81) == 0x81) {
data->in[i] = pc87360_read_value(data, LD_IN,
i, PC87365_REG_IN);
}
if (data->in_status[i] & 0x01) {
data->in_min[i] = pc87360_read_value(data,
LD_IN, i,
PC87365_REG_IN_MIN);
data->in_max[i] = pc87360_read_value(data,
LD_IN, i,
PC87365_REG_IN_MAX);
if (i >= 11)
data->in_crit[i-11] =
pc87360_read_value(data, LD_IN,
i, PC87365_REG_TEMP_CRIT);
}
}
if (data->innr) {
data->in_alarms = pc87360_read_value(data, LD_IN,
NO_BANK, PC87365_REG_IN_ALARMS1)
| ((pc87360_read_value(data, LD_IN,
NO_BANK, PC87365_REG_IN_ALARMS2)
& 0x07) << 8);
data->vid = (data->vid_conf & 0xE0) ?
pc87360_read_value(data, LD_IN,
NO_BANK, PC87365_REG_VID) : 0x1F;
}
/* Temperatures */
for (i = 0; i < data->tempnr; i++) {
data->temp_status[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP_STATUS);
/* Clear bits */
pc87360_write_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS,
data->temp_status[i]);
if ((data->temp_status[i] & 0x81) == 0x81) {
data->temp[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP);
}
if (data->temp_status[i] & 0x01) {
data->temp_min[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP_MIN);
data->temp_max[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP_MAX);
data->temp_crit[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP_CRIT);
}
}
if (data->tempnr) {
data->temp_alarms = pc87360_read_value(data, LD_TEMP,
NO_BANK, PC87365_REG_TEMP_ALARMS)
& 0x3F;
}
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
return data;
}
static int __init pc87360_init(void)
{
int i;
if (pc87360_find(0x2e, &devid, extra_isa)
&& pc87360_find(0x4e, &devid, extra_isa)) {
printk(KERN_WARNING "pc87360: PC8736x not detected, "
"module not inserted.\n");
return -ENODEV;
}
/* Arbitrarily pick one of the addresses */
for (i = 0; i < 3; i++) {
if (extra_isa[i] != 0x0000) {
address = extra_isa[i];
break;
}
}
if (address == 0x0000) {
printk(KERN_WARNING "pc87360: No active logical device, "
"module not inserted.\n");
return -ENODEV;
}
return i2c_isa_add_driver(&pc87360_driver);
}
static void __exit pc87360_exit(void)
{
i2c_isa_del_driver(&pc87360_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("PC8736x hardware monitor");
MODULE_LICENSE("GPL");
module_init(pc87360_init);
module_exit(pc87360_exit);
View Git Blame Copy Permalink