forked from luck/tmp_suning_uos_patched
fb01eb3651
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
[nsekhar@ti.com: drop obsolete hawkboard.org URL completeley
fixup subject line prefix]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
217 lines
4.8 KiB
ArmAsm
217 lines
4.8 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* (C) Copyright 2009, Texas Instruments, Inc. https://www.ti.com/
|
|
*/
|
|
|
|
/* replicated define because linux/bitops.h cannot be included in assembly */
|
|
#define BIT(nr) (1 << (nr))
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include "psc.h"
|
|
#include "ddr2.h"
|
|
|
|
#include "clock.h"
|
|
|
|
/* Arbitrary, hardware currently does not update PHYRDY correctly */
|
|
#define PHYRDY_CYCLES 0x1000
|
|
|
|
/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */
|
|
#define PLL_BYPASS_CYCLES (PLL_BYPASS_TIME * 25)
|
|
#define PLL_RESET_CYCLES (PLL_RESET_TIME * 25)
|
|
#define PLL_LOCK_CYCLES (PLL_LOCK_TIME * 25)
|
|
|
|
#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31)
|
|
|
|
.text
|
|
.arch armv5te
|
|
/*
|
|
* Move DaVinci into deep sleep state
|
|
*
|
|
* Note: This code is copied to internal SRAM by PM code. When the DaVinci
|
|
* wakes up it continues execution at the point it went to sleep.
|
|
* Register Usage:
|
|
* r0: contains virtual base for DDR2 controller
|
|
* r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
|
|
* r2: contains PSC number for DDR2
|
|
* r3: contains virtual base DDR2 PLL controller
|
|
* r4: contains virtual address of the DEEPSLEEP register
|
|
*/
|
|
ENTRY(davinci_cpu_suspend)
|
|
stmfd sp!, {r0-r12, lr} @ save registers on stack
|
|
|
|
ldr ip, CACHE_FLUSH
|
|
blx ip
|
|
|
|
ldmia r0, {r0-r4}
|
|
|
|
/*
|
|
* Switch DDR to self-refresh mode.
|
|
*/
|
|
|
|
/* calculate SDRCR address */
|
|
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
bic ip, ip, #DDR2_SRPD_BIT
|
|
orr ip, ip, #DDR2_LPMODEN_BIT
|
|
str ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
|
|
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
orr ip, ip, #DDR2_MCLKSTOPEN_BIT
|
|
str ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
|
|
mov ip, #PHYRDY_CYCLES
|
|
1: subs ip, ip, #0x1
|
|
bne 1b
|
|
|
|
/* Disable DDR2 LPSC */
|
|
mov r7, r0
|
|
mov r0, #0x2
|
|
bl davinci_ddr_psc_config
|
|
mov r0, r7
|
|
|
|
/* Disable clock to DDR PHY */
|
|
ldr ip, [r3, #PLLDIV1]
|
|
bic ip, ip, #PLLDIV_EN
|
|
str ip, [r3, #PLLDIV1]
|
|
|
|
/* Put the DDR PLL in bypass and power down */
|
|
ldr ip, [r3, #PLLCTL]
|
|
bic ip, ip, #PLLCTL_PLLENSRC
|
|
bic ip, ip, #PLLCTL_PLLEN
|
|
str ip, [r3, #PLLCTL]
|
|
|
|
/* Wait for PLL to switch to bypass */
|
|
mov ip, #PLL_BYPASS_CYCLES
|
|
2: subs ip, ip, #0x1
|
|
bne 2b
|
|
|
|
/* Power down the PLL */
|
|
ldr ip, [r3, #PLLCTL]
|
|
orr ip, ip, #PLLCTL_PLLPWRDN
|
|
str ip, [r3, #PLLCTL]
|
|
|
|
/* Go to deep sleep */
|
|
ldr ip, [r4]
|
|
orr ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
|
|
/* System goes to sleep beyond after this instruction */
|
|
str ip, [r4]
|
|
|
|
/* Wake up from sleep */
|
|
|
|
/* Clear sleep enable */
|
|
ldr ip, [r4]
|
|
bic ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
|
|
str ip, [r4]
|
|
|
|
/* initialize the DDR PLL controller */
|
|
|
|
/* Put PLL in reset */
|
|
ldr ip, [r3, #PLLCTL]
|
|
bic ip, ip, #PLLCTL_PLLRST
|
|
str ip, [r3, #PLLCTL]
|
|
|
|
/* Clear PLL power down */
|
|
ldr ip, [r3, #PLLCTL]
|
|
bic ip, ip, #PLLCTL_PLLPWRDN
|
|
str ip, [r3, #PLLCTL]
|
|
|
|
mov ip, #PLL_RESET_CYCLES
|
|
3: subs ip, ip, #0x1
|
|
bne 3b
|
|
|
|
/* Bring PLL out of reset */
|
|
ldr ip, [r3, #PLLCTL]
|
|
orr ip, ip, #PLLCTL_PLLRST
|
|
str ip, [r3, #PLLCTL]
|
|
|
|
/* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */
|
|
mov ip, #PLL_LOCK_CYCLES
|
|
4: subs ip, ip, #0x1
|
|
bne 4b
|
|
|
|
/* Remove PLL from bypass mode */
|
|
ldr ip, [r3, #PLLCTL]
|
|
bic ip, ip, #PLLCTL_PLLENSRC
|
|
orr ip, ip, #PLLCTL_PLLEN
|
|
str ip, [r3, #PLLCTL]
|
|
|
|
/* Start 2x clock to DDR2 */
|
|
|
|
ldr ip, [r3, #PLLDIV1]
|
|
orr ip, ip, #PLLDIV_EN
|
|
str ip, [r3, #PLLDIV1]
|
|
|
|
/* Enable VCLK */
|
|
|
|
/* Enable DDR2 LPSC */
|
|
mov r7, r0
|
|
mov r0, #0x3
|
|
bl davinci_ddr_psc_config
|
|
mov r0, r7
|
|
|
|
/* clear MCLKSTOPEN */
|
|
|
|
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
bic ip, ip, #DDR2_MCLKSTOPEN_BIT
|
|
str ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
|
|
ldr ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
bic ip, ip, #DDR2_LPMODEN_BIT
|
|
str ip, [r0, #DDR2_SDRCR_OFFSET]
|
|
|
|
/* Restore registers and return */
|
|
ldmfd sp!, {r0-r12, pc}
|
|
|
|
ENDPROC(davinci_cpu_suspend)
|
|
|
|
/*
|
|
* Disables or Enables DDR2 LPSC
|
|
* Register Usage:
|
|
* r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC
|
|
* r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
|
|
* r2: contains PSC number for DDR2
|
|
*/
|
|
ENTRY(davinci_ddr_psc_config)
|
|
/* Set next state in mdctl for DDR2 */
|
|
mov r6, #MDCTL
|
|
add r6, r6, r2, lsl #2
|
|
ldr ip, [r1, r6]
|
|
bic ip, ip, #MDSTAT_STATE_MASK
|
|
orr ip, ip, r0
|
|
str ip, [r1, r6]
|
|
|
|
/* Enable the Power Domain Transition Command */
|
|
ldr ip, [r1, #PTCMD]
|
|
orr ip, ip, #0x1
|
|
str ip, [r1, #PTCMD]
|
|
|
|
/* Check for Transition Complete (PTSTAT) */
|
|
ptstat_done:
|
|
ldr ip, [r1, #PTSTAT]
|
|
and ip, ip, #0x1
|
|
cmp ip, #0x0
|
|
bne ptstat_done
|
|
|
|
/* Check for DDR2 clock disable completion; */
|
|
mov r6, #MDSTAT
|
|
add r6, r6, r2, lsl #2
|
|
ddr2clk_stop_done:
|
|
ldr ip, [r1, r6]
|
|
and ip, ip, #MDSTAT_STATE_MASK
|
|
cmp ip, r0
|
|
bne ddr2clk_stop_done
|
|
|
|
ret lr
|
|
ENDPROC(davinci_ddr_psc_config)
|
|
|
|
CACHE_FLUSH:
|
|
#ifdef CONFIG_CPU_V6
|
|
.word v6_flush_kern_cache_all
|
|
#else
|
|
.word arm926_flush_kern_cache_all
|
|
#endif
|
|
|
|
ENTRY(davinci_cpu_suspend_sz)
|
|
.word . - davinci_cpu_suspend
|
|
ENDPROC(davinci_cpu_suspend_sz)
|