kernel_optimize_test/arch/m68k/include/asm/openprom.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

314 lines
8.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __SPARC_OPENPROM_H
#define __SPARC_OPENPROM_H
/* openprom.h: Prom structures and defines for access to the OPENBOOT
* prom routines and data areas.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
*/
/* Empirical constants... */
#ifdef CONFIG_SUN3
#define KADB_DEBUGGER_BEGVM 0x0fee0000 /* There is no kadb yet but...*/
#define LINUX_OPPROM_BEGVM 0x0fef0000
#define LINUX_OPPROM_ENDVM 0x0ff10000 /* I think this is right - tm */
#else
#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */
#define LINUX_OPPROM_BEGVM 0xffd00000
#define LINUX_OPPROM_ENDVM 0xfff00000
#define LINUX_OPPROM_MAGIC 0x10010407
#endif
#ifndef __ASSEMBLY__
/* V0 prom device operations. */
struct linux_dev_v0_funcs {
int (*v0_devopen)(char *device_str);
int (*v0_devclose)(int dev_desc);
int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
};
/* V2 and later prom device operations. */
struct linux_dev_v2_funcs {
int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */
char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
void (*v2_dumb_mem_free)(char *va, unsigned sz);
/* To map devices into virtual I/O space. */
char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
void (*v2_dumb_munmap)(char *virta, unsigned size);
int (*v2_dev_open)(char *devpath);
void (*v2_dev_close)(int d);
int (*v2_dev_read)(int d, char *buf, int nbytes);
int (*v2_dev_write)(int d, char *buf, int nbytes);
int (*v2_dev_seek)(int d, int hi, int lo);
/* Never issued (multistage load support) */
void (*v2_wheee2)(void);
void (*v2_wheee3)(void);
};
struct linux_mlist_v0 {
struct linux_mlist_v0 *theres_more;
char *start_adr;
unsigned num_bytes;
};
struct linux_mem_v0 {
struct linux_mlist_v0 **v0_totphys;
struct linux_mlist_v0 **v0_prommap;
struct linux_mlist_v0 **v0_available; /* What we can use */
};
/* Arguments sent to the kernel from the boot prompt. */
struct linux_arguments_v0 {
char *argv[8];
char args[100];
char boot_dev[2];
int boot_dev_ctrl;
int boot_dev_unit;
int dev_partition;
char *kernel_file_name;
void *aieee1; /* XXX */
};
/* V2 and up boot things. */
struct linux_bootargs_v2 {
char **bootpath;
char **bootargs;
int *fd_stdin;
int *fd_stdout;
};
#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
struct linux_romvec {
char *pv_initsp;
int (*pv_startmon)(void);
int *diagberr;
struct linux_arguments_v0 **pv_v0bootargs;
unsigned *pv_sun3mem;
unsigned char (*pv_getchar)(void);
int (*pv_putchar)(int ch);
int (*pv_nbgetchar)(void);
int (*pv_nbputchar)(int ch);
unsigned char *pv_echo;
unsigned char *pv_insource;
unsigned char *pv_outsink;
int (*pv_getkey)(void);
int (*pv_initgetkey)(void);
unsigned int *pv_translation;
unsigned char *pv_keybid;
int *pv_screen_x;
int *pv_screen_y;
struct keybuf *pv_keybuf;
char *pv_monid;
/*
* Frame buffer output and terminal emulation
*/
int (*pv_fbwritechar)(char);
int *pv_fbaddr;
char **pv_font;
int (*pv_fbwritestr)(char);
void (*pv_reboot)(char *bootstr);
/*
* Line input and parsing
*/
unsigned char *pv_linebuf;
unsigned char **pv_lineptr;
int *pv_linesize;
int (*pv_getline)(void);
unsigned char (*pv_getnextchar)(void);
unsigned char (*pv_peeknextchar)(void);
int *pv_fbthere;
int (*pv_getnum)(void);
void (*pv_printf)(const char *fmt, ...);
int (*pv_printhex)(void);
unsigned char *pv_leds;
int (*pv_setleds)(void);
/*
* Non-maskable interrupt (nmi) information
*/
int (*pv_nmiaddr)(void);
int (*pv_abortentry)(void);
int *pv_nmiclock;
int *pv_fbtype;
/*
* Assorted other things
*/
unsigned pv_romvers;
struct globram *pv_globram;
char *pv_kbdzscc;
int *pv_keyrinit;
unsigned char *pv_keyrtick;
unsigned *pv_memoryavail;
long *pv_resetaddr;
long *pv_resetmap;
void (*pv_halt)(void);
unsigned char *pv_memorybitmap;
#ifdef CONFIG_SUN3
void (*pv_setctxt)(int ctxt, char *va, int pmeg);
void (*pv_vector_cmd)(void);
int dummy1z;
int dummy2z;
int dummy3z;
int dummy4z;
#endif
};
#else
/* The top level PROM vector. */
struct linux_romvec {
/* Version numbers. */
unsigned int pv_magic_cookie;
unsigned int pv_romvers;
unsigned int pv_plugin_revision;
unsigned int pv_printrev;
/* Version 0 memory descriptors. */
struct linux_mem_v0 pv_v0mem;
/* Node operations. */
struct linux_nodeops *pv_nodeops;
char **pv_bootstr;
struct linux_dev_v0_funcs pv_v0devops;
char *pv_stdin;
char *pv_stdout;
#define PROMDEV_KBD 0 /* input from keyboard */
#define PROMDEV_SCREEN 0 /* output to screen */
#define PROMDEV_TTYA 1 /* in/out to ttya */
#define PROMDEV_TTYB 2 /* in/out to ttyb */
/* Blocking getchar/putchar. NOT REENTRANT! (grr) */
int (*pv_getchar)(void);
void (*pv_putchar)(int ch);
/* Non-blocking variants. */
int (*pv_nbgetchar)(void);
int (*pv_nbputchar)(int ch);
void (*pv_putstr)(char *str, int len);
/* Miscellany. */
void (*pv_reboot)(char *bootstr);
void (*pv_printf)(__const__ char *fmt, ...);
void (*pv_abort)(void);
__volatile__ int *pv_ticks;
void (*pv_halt)(void);
void (**pv_synchook)(void);
/* Evaluate a forth string, not different proto for V0 and V2->up. */
union {
void (*v0_eval)(int len, char *str);
void (*v2_eval)(char *str);
} pv_fortheval;
struct linux_arguments_v0 **pv_v0bootargs;
/* Get ether address. */
unsigned int (*pv_enaddr)(int d, char *enaddr);
struct linux_bootargs_v2 pv_v2bootargs;
struct linux_dev_v2_funcs pv_v2devops;
int filler[15];
/* This one is sun4c/sun4 only. */
void (*pv_setctxt)(int ctxt, char *va, int pmeg);
/* Prom version 3 Multiprocessor routines. This stuff is crazy.
* No joke. Calling these when there is only one cpu probably
* crashes the machine, have to test this. :-)
*/
/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
* 'thiscontext' executing at address 'prog_counter'
*/
int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
int thiscontext, char *prog_counter);
/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
* until a resume cpu call is made.
*/
int (*v3_cpustop)(unsigned int whichcpu);
/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
* resume cpu call is made.
*/
int (*v3_cpuidle)(unsigned int whichcpu);
/* v3_cpuresume() will resume processor 'whichcpu' executing
* starting with whatever 'pc' and 'npc' were left at the
* last 'idle' or 'stop' call.
*/
int (*v3_cpuresume)(unsigned int whichcpu);
};
#endif
/* Routines for traversing the prom device tree. */
struct linux_nodeops {
int (*no_nextnode)(int node);
int (*no_child)(int node);
int (*no_proplen)(int node, char *name);
int (*no_getprop)(int node, char *name, char *val);
int (*no_setprop)(int node, char *name, char *val, int len);
char * (*no_nextprop)(int node, char *name);
};
/* More fun PROM structures for device probing. */
#define PROMREG_MAX 16
#define PROMVADDR_MAX 16
#define PROMINTR_MAX 15
struct linux_prom_registers {
int which_io; /* is this in OBIO space? */
char *phys_addr; /* The physical address of this register */
int reg_size; /* How many bytes does this register take up? */
};
struct linux_prom_irqs {
int pri; /* IRQ priority */
int vector; /* This is foobar, what does it do? */
};
/* Element of the "ranges" vector */
struct linux_prom_ranges {
unsigned int ot_child_space;
unsigned int ot_child_base; /* Bus feels this */
unsigned int ot_parent_space;
unsigned int ot_parent_base; /* CPU looks from here */
unsigned int or_size;
};
#endif /* !(__ASSEMBLY__) */
#endif /* !(__SPARC_OPENPROM_H) */