kernel_optimize_test/drivers/nfc/nxp-nci/i2c.c
Michael Walle de876f36f9 NFC: nxp-nci: don't print header length mismatch on i2c error
[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ]

Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21 21:20:14 +02:00

365 lines
8.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* I2C link layer for the NXP NCI driver
*
* Copyright (C) 2014 NXP Semiconductors All rights reserved.
* Copyright (C) 2012-2015 Intel Corporation. All rights reserved.
*
* Authors: Clément Perrochaud <clement.perrochaud@nxp.com>
* Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
*
* Derived from PN544 device driver:
* Copyright (C) 2012 Intel Corporation. All rights reserved.
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/nfc.h>
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
#include <net/nfc/nfc.h>
#include "nxp-nci.h"
#define NXP_NCI_I2C_DRIVER_NAME "nxp-nci_i2c"
#define NXP_NCI_I2C_MAX_PAYLOAD 32
struct nxp_nci_i2c_phy {
struct i2c_client *i2c_dev;
struct nci_dev *ndev;
struct gpio_desc *gpiod_en;
struct gpio_desc *gpiod_fw;
int hard_fault; /*
* < 0 if hardware error occurred (e.g. i2c err)
* and prevents normal operation.
*/
};
static int nxp_nci_i2c_set_mode(void *phy_id,
enum nxp_nci_mode mode)
{
struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;
gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
usleep_range(10000, 15000);
if (mode == NXP_NCI_MODE_COLD)
phy->hard_fault = 0;
return 0;
}
static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
{
int r;
struct nxp_nci_i2c_phy *phy = phy_id;
struct i2c_client *client = phy->i2c_dev;
if (phy->hard_fault != 0)
return phy->hard_fault;
r = i2c_master_send(client, skb->data, skb->len);
if (r < 0) {
/* Retry, chip was in standby */
msleep(110);
r = i2c_master_send(client, skb->data, skb->len);
}
if (r < 0) {
nfc_err(&client->dev, "Error %d on I2C send\n", r);
} else if (r != skb->len) {
nfc_err(&client->dev,
"Invalid length sent: %u (expected %u)\n",
r, skb->len);
r = -EREMOTEIO;
} else {
/* Success but return 0 and not number of bytes */
r = 0;
}
return r;
}
static const struct nxp_nci_phy_ops i2c_phy_ops = {
.set_mode = nxp_nci_i2c_set_mode,
.write = nxp_nci_i2c_write,
};
static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy,
struct sk_buff **skb)
{
struct i2c_client *client = phy->i2c_dev;
u16 header;
size_t frame_len;
int r;
r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN);
if (r < 0) {
goto fw_read_exit;
} else if (r != NXP_NCI_FW_HDR_LEN) {
nfc_err(&client->dev, "Incorrect header length: %u\n", r);
r = -EBADMSG;
goto fw_read_exit;
}
frame_len = (be16_to_cpu(header) & NXP_NCI_FW_FRAME_LEN_MASK) +
NXP_NCI_FW_CRC_LEN;
*skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL);
if (*skb == NULL) {
r = -ENOMEM;
goto fw_read_exit;
}
skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
if (r < 0) {
goto fw_read_exit_free_skb;
} else if (r != frame_len) {
nfc_err(&client->dev,
"Invalid frame length: %u (expected %zu)\n",
r, frame_len);
r = -EBADMSG;
goto fw_read_exit_free_skb;
}
return 0;
fw_read_exit_free_skb:
kfree_skb(*skb);
fw_read_exit:
return r;
}
static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy,
struct sk_buff **skb)
{
struct nci_ctrl_hdr header; /* May actually be a data header */
struct i2c_client *client = phy->i2c_dev;
int r;
r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE);
if (r < 0) {
goto nci_read_exit;
} else if (r != NCI_CTRL_HDR_SIZE) {
nfc_err(&client->dev, "Incorrect header length: %u\n", r);
r = -EBADMSG;
goto nci_read_exit;
}
*skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL);
if (*skb == NULL) {
r = -ENOMEM;
goto nci_read_exit;
}
skb_put_data(*skb, (void *)&header, NCI_CTRL_HDR_SIZE);
if (!header.plen)
return 0;
r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
if (r < 0) {
goto nci_read_exit_free_skb;
} else if (r != header.plen) {
nfc_err(&client->dev,
"Invalid frame payload length: %u (expected %u)\n",
r, header.plen);
r = -EBADMSG;
goto nci_read_exit_free_skb;
}
return 0;
nci_read_exit_free_skb:
kfree_skb(*skb);
nci_read_exit:
return r;
}
static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
{
struct nxp_nci_i2c_phy *phy = phy_id;
struct i2c_client *client;
struct nxp_nci_info *info;
struct sk_buff *skb = NULL;
int r = 0;
if (!phy || !phy->ndev)
goto exit_irq_none;
client = phy->i2c_dev;
if (!client || irq != client->irq)
goto exit_irq_none;
info = nci_get_drvdata(phy->ndev);
if (!info)
goto exit_irq_none;
mutex_lock(&info->info_lock);
if (phy->hard_fault != 0)
goto exit_irq_handled;
switch (info->mode) {
case NXP_NCI_MODE_NCI:
r = nxp_nci_i2c_nci_read(phy, &skb);
break;
case NXP_NCI_MODE_FW:
r = nxp_nci_i2c_fw_read(phy, &skb);
break;
case NXP_NCI_MODE_COLD:
r = -EREMOTEIO;
break;
}
if (r == -EREMOTEIO) {
phy->hard_fault = r;
if (info->mode == NXP_NCI_MODE_FW)
nxp_nci_fw_recv_frame(phy->ndev, NULL);
}
if (r < 0) {
nfc_err(&client->dev, "Read failed with error %d\n", r);
goto exit_irq_handled;
}
switch (info->mode) {
case NXP_NCI_MODE_NCI:
nci_recv_frame(phy->ndev, skb);
break;
case NXP_NCI_MODE_FW:
nxp_nci_fw_recv_frame(phy->ndev, skb);
break;
case NXP_NCI_MODE_COLD:
break;
}
exit_irq_handled:
mutex_unlock(&info->info_lock);
return IRQ_HANDLED;
exit_irq_none:
WARN_ON_ONCE(1);
return IRQ_NONE;
}
static const struct acpi_gpio_params firmware_gpios = { 1, 0, false };
static const struct acpi_gpio_params enable_gpios = { 2, 0, false };
static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
{ "enable-gpios", &enable_gpios, 1 },
{ "firmware-gpios", &firmware_gpios, 1 },
{ }
};
static int nxp_nci_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct nxp_nci_i2c_phy *phy;
int r;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
return -ENODEV;
}
phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy),
GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->i2c_dev = client;
i2c_set_clientdata(client, phy);
r = devm_acpi_dev_add_driver_gpios(dev, acpi_nxp_nci_gpios);
if (r)
dev_dbg(dev, "Unable to add GPIO mapping table\n");
phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_en)) {
nfc_err(dev, "Failed to get EN gpio\n");
return PTR_ERR(phy->gpiod_en);
}
phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_fw)) {
nfc_err(dev, "Failed to get FW gpio\n");
return PTR_ERR(phy->gpiod_fw);
}
r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev);
if (r < 0)
return r;
r = request_threaded_irq(client->irq, NULL,
nxp_nci_i2c_irq_thread_fn,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
NXP_NCI_I2C_DRIVER_NAME, phy);
if (r < 0)
nfc_err(&client->dev, "Unable to register IRQ handler\n");
return r;
}
static int nxp_nci_i2c_remove(struct i2c_client *client)
{
struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
nxp_nci_remove(phy->ndev);
free_irq(client->irq, phy);
return 0;
}
static const struct i2c_device_id nxp_nci_i2c_id_table[] = {
{"nxp-nci_i2c", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table);
static const struct of_device_id of_nxp_nci_i2c_match[] = {
{ .compatible = "nxp,nxp-nci-i2c", },
{}
};
MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id acpi_id[] = {
{ "NXP1001" },
{ "NXP7471" },
{ }
};
MODULE_DEVICE_TABLE(acpi, acpi_id);
#endif
static struct i2c_driver nxp_nci_i2c_driver = {
.driver = {
.name = NXP_NCI_I2C_DRIVER_NAME,
.acpi_match_table = ACPI_PTR(acpi_id),
.of_match_table = of_nxp_nci_i2c_match,
},
.probe = nxp_nci_i2c_probe,
.id_table = nxp_nci_i2c_id_table,
.remove = nxp_nci_i2c_remove,
};
module_i2c_driver(nxp_nci_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers");
MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>");
MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>");