forked from luck/tmp_suning_uos_patched
37670676a1
Setting of PWM_SW_UPDATE is bit different in Intel Broxton compared to the previous generation SoCs. Previously it was OK to set the bit many times (from userspace via sysfs for example) before the PWM is actually enabled. Starting from Intel Broxton it seems that we must set PWM_SW_UPDATE only once before the PWM is enabled. Otherwise it is possible that the PWM does not start properly. Change the sequence of how PWM_SW_UPDATE is programmed so that we only set it in pwm_lpss_config() when the PWM is already enabled. The initial setting of PWM_SW_UPDATE will be done when PWM gets enabled. This should make the driver work with the previous generation Intel SoCs and Broxton. Add also small delay after the bit is set to let the hardware propagate it properly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
||
|---|---|---|
| .. | ||
| core.c | ||
| Kconfig | ||
| Makefile | ||
| pwm-ab8500.c | ||
| pwm-atmel-hlcdc.c | ||
| pwm-atmel-tcb.c | ||
| pwm-atmel.c | ||
| pwm-bcm-kona.c | ||
| pwm-bcm2835.c | ||
| pwm-berlin.c | ||
| pwm-bfin.c | ||
| pwm-brcmstb.c | ||
| pwm-clps711x.c | ||
| pwm-crc.c | ||
| pwm-ep93xx.c | ||
| pwm-fsl-ftm.c | ||
| pwm-img.c | ||
| pwm-imx.c | ||
| pwm-jz4740.c | ||
| pwm-lp3943.c | ||
| pwm-lpc18xx-sct.c | ||
| pwm-lpc32xx.c | ||
| pwm-lpss-pci.c | ||
| pwm-lpss-platform.c | ||
| pwm-lpss.c | ||
| pwm-lpss.h | ||
| pwm-mtk-disp.c | ||
| pwm-mxs.c | ||
| pwm-pca9685.c | ||
| pwm-puv3.c | ||
| pwm-pxa.c | ||
| pwm-rcar.c | ||
| pwm-renesas-tpu.c | ||
| pwm-rockchip.c | ||
| pwm-samsung.c | ||
| pwm-spear.c | ||
| pwm-sti.c | ||
| pwm-sun4i.c | ||
| pwm-tegra.c | ||
| pwm-tiecap.c | ||
| pwm-tiehrpwm.c | ||
| pwm-tipwmss.c | ||
| pwm-tipwmss.h | ||
| pwm-twl-led.c | ||
| pwm-twl.c | ||
| pwm-vt8500.c | ||
| sysfs.c | ||