forked from luck/tmp_suning_uos_patched
bf35706f3d
This patch replaces the 'branch to setup()' instructions embedded in the PROCINFO structs with the offset to that setup function relative to the base of the struct. This preserves the position independent nature of that field, but uses a data item rather than an instruction. This is mainly done to prevent linker failures on large kernels, where the setup function is out of reach for the branch. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
713 lines
18 KiB
ArmAsm
713 lines
18 KiB
ArmAsm
/*
|
|
* linux/arch/arm/kernel/head.S
|
|
*
|
|
* Copyright (C) 1994-2002 Russell King
|
|
* Copyright (c) 2003 ARM Limited
|
|
* All Rights Reserved
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Kernel startup code for all 32-bit CPUs
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/assembler.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/domain.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
|
|
#include CONFIG_DEBUG_LL_INCLUDE
|
|
#endif
|
|
|
|
/*
|
|
* swapper_pg_dir is the virtual address of the initial page table.
|
|
* We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
|
|
* make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
|
|
* the least significant 16 bits to be 0x8000, but we could probably
|
|
* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
|
|
*/
|
|
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
|
|
#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
|
|
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_LPAE
|
|
/* LPAE requires an additional page for the PGD */
|
|
#define PG_DIR_SIZE 0x5000
|
|
#define PMD_ORDER 3
|
|
#else
|
|
#define PG_DIR_SIZE 0x4000
|
|
#define PMD_ORDER 2
|
|
#endif
|
|
|
|
.globl swapper_pg_dir
|
|
.equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
|
|
|
|
.macro pgtbl, rd, phys
|
|
add \rd, \phys, #TEXT_OFFSET
|
|
sub \rd, \rd, #PG_DIR_SIZE
|
|
.endm
|
|
|
|
/*
|
|
* Kernel startup entry point.
|
|
* ---------------------------
|
|
*
|
|
* This is normally called from the decompressor code. The requirements
|
|
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
|
|
* r1 = machine nr, r2 = atags or dtb pointer.
|
|
*
|
|
* This code is mostly position independent, so if you link the kernel at
|
|
* 0xc0008000, you call this at __pa(0xc0008000).
|
|
*
|
|
* See linux/arch/arm/tools/mach-types for the complete list of machine
|
|
* numbers for r1.
|
|
*
|
|
* We're trying to keep crap to a minimum; DO NOT add any machine specific
|
|
* crap here - that's what the boot loader (or in extreme, well justified
|
|
* circumstances, zImage) is for.
|
|
*/
|
|
.arm
|
|
|
|
__HEAD
|
|
ENTRY(stext)
|
|
ARM_BE8(setend be ) @ ensure we are in BE8 mode
|
|
|
|
THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
|
|
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
|
|
THUMB( .thumb ) @ switch to Thumb now.
|
|
THUMB(1: )
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
bl __hyp_stub_install
|
|
#endif
|
|
@ ensure svc mode and all interrupts masked
|
|
safe_svcmode_maskall r9
|
|
|
|
mrc p15, 0, r9, c0, c0 @ get processor id
|
|
bl __lookup_processor_type @ r5=procinfo r9=cpuid
|
|
movs r10, r5 @ invalid processor (r5=0)?
|
|
THUMB( it eq ) @ force fixup-able long branch encoding
|
|
beq __error_p @ yes, error 'p'
|
|
|
|
#ifdef CONFIG_ARM_LPAE
|
|
mrc p15, 0, r3, c0, c1, 4 @ read ID_MMFR0
|
|
and r3, r3, #0xf @ extract VMSA support
|
|
cmp r3, #5 @ long-descriptor translation table format?
|
|
THUMB( it lo ) @ force fixup-able long branch encoding
|
|
blo __error_lpae @ only classic page table format
|
|
#endif
|
|
|
|
#ifndef CONFIG_XIP_KERNEL
|
|
adr r3, 2f
|
|
ldmia r3, {r4, r8}
|
|
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
|
|
add r8, r8, r4 @ PHYS_OFFSET
|
|
#else
|
|
ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
|
|
#endif
|
|
|
|
/*
|
|
* r1 = machine no, r2 = atags or dtb,
|
|
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
|
|
*/
|
|
bl __vet_atags
|
|
#ifdef CONFIG_SMP_ON_UP
|
|
bl __fixup_smp
|
|
#endif
|
|
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
|
|
bl __fixup_pv_table
|
|
#endif
|
|
bl __create_page_tables
|
|
|
|
/*
|
|
* The following calls CPU specific code in a position independent
|
|
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
|
|
* xxx_proc_info structure selected by __lookup_processor_type
|
|
* above. On return, the CPU will be ready for the MMU to be
|
|
* turned on, and r0 will hold the CPU control register value.
|
|
*/
|
|
ldr r13, =__mmap_switched @ address to jump to after
|
|
@ mmu has been enabled
|
|
adr lr, BSYM(1f) @ return (PIC) address
|
|
mov r8, r4 @ set TTBR1 to swapper_pg_dir
|
|
ldr r12, [r10, #PROCINFO_INITFUNC]
|
|
add r12, r12, r10
|
|
ret r12
|
|
1: b __enable_mmu
|
|
ENDPROC(stext)
|
|
.ltorg
|
|
#ifndef CONFIG_XIP_KERNEL
|
|
2: .long .
|
|
.long PAGE_OFFSET
|
|
#endif
|
|
|
|
/*
|
|
* Setup the initial page tables. We only setup the barest
|
|
* amount which are required to get the kernel running, which
|
|
* generally means mapping in the kernel code.
|
|
*
|
|
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
|
|
*
|
|
* Returns:
|
|
* r0, r3, r5-r7 corrupted
|
|
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
|
|
*/
|
|
__create_page_tables:
|
|
pgtbl r4, r8 @ page table address
|
|
|
|
/*
|
|
* Clear the swapper page table
|
|
*/
|
|
mov r0, r4
|
|
mov r3, #0
|
|
add r6, r0, #PG_DIR_SIZE
|
|
1: str r3, [r0], #4
|
|
str r3, [r0], #4
|
|
str r3, [r0], #4
|
|
str r3, [r0], #4
|
|
teq r0, r6
|
|
bne 1b
|
|
|
|
#ifdef CONFIG_ARM_LPAE
|
|
/*
|
|
* Build the PGD table (first level) to point to the PMD table. A PGD
|
|
* entry is 64-bit wide.
|
|
*/
|
|
mov r0, r4
|
|
add r3, r4, #0x1000 @ first PMD table address
|
|
orr r3, r3, #3 @ PGD block type
|
|
mov r6, #4 @ PTRS_PER_PGD
|
|
mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER
|
|
1:
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
str r7, [r0], #4 @ set top PGD entry bits
|
|
str r3, [r0], #4 @ set bottom PGD entry bits
|
|
#else
|
|
str r3, [r0], #4 @ set bottom PGD entry bits
|
|
str r7, [r0], #4 @ set top PGD entry bits
|
|
#endif
|
|
add r3, r3, #0x1000 @ next PMD table
|
|
subs r6, r6, #1
|
|
bne 1b
|
|
|
|
add r4, r4, #0x1000 @ point to the PMD tables
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
add r4, r4, #4 @ we only write the bottom word
|
|
#endif
|
|
#endif
|
|
|
|
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
|
|
|
|
/*
|
|
* Create identity mapping to cater for __enable_mmu.
|
|
* This identity mapping will be removed by paging_init().
|
|
*/
|
|
adr r0, __turn_mmu_on_loc
|
|
ldmia r0, {r3, r5, r6}
|
|
sub r0, r0, r3 @ virt->phys offset
|
|
add r5, r5, r0 @ phys __turn_mmu_on
|
|
add r6, r6, r0 @ phys __turn_mmu_on_end
|
|
mov r5, r5, lsr #SECTION_SHIFT
|
|
mov r6, r6, lsr #SECTION_SHIFT
|
|
|
|
1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
|
|
str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping
|
|
cmp r5, r6
|
|
addlo r5, r5, #1 @ next section
|
|
blo 1b
|
|
|
|
/*
|
|
* Map our RAM from the start to the end of the kernel .bss section.
|
|
*/
|
|
add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
|
|
ldr r6, =(_end - 1)
|
|
orr r3, r8, r7
|
|
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
|
|
1: str r3, [r0], #1 << PMD_ORDER
|
|
add r3, r3, #1 << SECTION_SHIFT
|
|
cmp r0, r6
|
|
bls 1b
|
|
|
|
#ifdef CONFIG_XIP_KERNEL
|
|
/*
|
|
* Map the kernel image separately as it is not located in RAM.
|
|
*/
|
|
#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
|
|
mov r3, pc
|
|
mov r3, r3, lsr #SECTION_SHIFT
|
|
orr r3, r7, r3, lsl #SECTION_SHIFT
|
|
add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
|
|
str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
|
|
ldr r6, =(_edata_loc - 1)
|
|
add r0, r0, #1 << PMD_ORDER
|
|
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
|
|
1: cmp r0, r6
|
|
add r3, r3, #1 << SECTION_SHIFT
|
|
strls r3, [r0], #1 << PMD_ORDER
|
|
bls 1b
|
|
#endif
|
|
|
|
/*
|
|
* Then map boot params address in r2 if specified.
|
|
* We map 2 sections in case the ATAGs/DTB crosses a section boundary.
|
|
*/
|
|
mov r0, r2, lsr #SECTION_SHIFT
|
|
movs r0, r0, lsl #SECTION_SHIFT
|
|
subne r3, r0, r8
|
|
addne r3, r3, #PAGE_OFFSET
|
|
addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
|
|
orrne r6, r7, r0
|
|
strne r6, [r3], #1 << PMD_ORDER
|
|
addne r6, r6, #1 << SECTION_SHIFT
|
|
strne r6, [r3]
|
|
|
|
#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
|
|
sub r4, r4, #4 @ Fixup page table pointer
|
|
@ for 64-bit descriptors
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_LL
|
|
#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
|
|
/*
|
|
* Map in IO space for serial debugging.
|
|
* This allows debug messages to be output
|
|
* via a serial console before paging_init.
|
|
*/
|
|
addruart r7, r3, r0
|
|
|
|
mov r3, r3, lsr #SECTION_SHIFT
|
|
mov r3, r3, lsl #PMD_ORDER
|
|
|
|
add r0, r4, r3
|
|
mov r3, r7, lsr #SECTION_SHIFT
|
|
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
|
|
orr r3, r7, r3, lsl #SECTION_SHIFT
|
|
#ifdef CONFIG_ARM_LPAE
|
|
mov r7, #1 << (54 - 32) @ XN
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
str r7, [r0], #4
|
|
str r3, [r0], #4
|
|
#else
|
|
str r3, [r0], #4
|
|
str r7, [r0], #4
|
|
#endif
|
|
#else
|
|
orr r3, r3, #PMD_SECT_XN
|
|
str r3, [r0], #4
|
|
#endif
|
|
|
|
#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
|
|
/* we don't need any serial debugging mappings */
|
|
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
|
|
/*
|
|
* If we're using the NetWinder or CATS, we also need to map
|
|
* in the 16550-type serial port for the debug messages
|
|
*/
|
|
add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
|
|
orr r3, r7, #0x7c000000
|
|
str r3, [r0]
|
|
#endif
|
|
#ifdef CONFIG_ARCH_RPC
|
|
/*
|
|
* Map in screen at 0x02000000 & SCREEN2_BASE
|
|
* Similar reasons here - for debug. This is
|
|
* only for Acorn RiscPC architectures.
|
|
*/
|
|
add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
|
|
orr r3, r7, #0x02000000
|
|
str r3, [r0]
|
|
add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
|
|
str r3, [r0]
|
|
#endif
|
|
#endif
|
|
#ifdef CONFIG_ARM_LPAE
|
|
sub r4, r4, #0x1000 @ point to the PGD table
|
|
mov r4, r4, lsr #ARCH_PGD_SHIFT
|
|
#endif
|
|
ret lr
|
|
ENDPROC(__create_page_tables)
|
|
.ltorg
|
|
.align
|
|
__turn_mmu_on_loc:
|
|
.long .
|
|
.long __turn_mmu_on
|
|
.long __turn_mmu_on_end
|
|
|
|
#if defined(CONFIG_SMP)
|
|
.text
|
|
ENTRY(secondary_startup_arm)
|
|
.arm
|
|
THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM.
|
|
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
|
|
THUMB( .thumb ) @ switch to Thumb now.
|
|
THUMB(1: )
|
|
ENTRY(secondary_startup)
|
|
/*
|
|
* Common entry point for secondary CPUs.
|
|
*
|
|
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
|
|
* the processor type - there is no need to check the machine type
|
|
* as it has already been validated by the primary processor.
|
|
*/
|
|
|
|
ARM_BE8(setend be) @ ensure we are in BE8 mode
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
bl __hyp_stub_install_secondary
|
|
#endif
|
|
safe_svcmode_maskall r9
|
|
|
|
mrc p15, 0, r9, c0, c0 @ get processor id
|
|
bl __lookup_processor_type
|
|
movs r10, r5 @ invalid processor?
|
|
moveq r0, #'p' @ yes, error 'p'
|
|
THUMB( it eq ) @ force fixup-able long branch encoding
|
|
beq __error_p
|
|
|
|
/*
|
|
* Use the page tables supplied from __cpu_up.
|
|
*/
|
|
adr r4, __secondary_data
|
|
ldmia r4, {r5, r7, r12} @ address to jump to after
|
|
sub lr, r4, r5 @ mmu has been enabled
|
|
ldr r4, [r7, lr] @ get secondary_data.pgdir
|
|
add r7, r7, #4
|
|
ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir
|
|
adr lr, BSYM(__enable_mmu) @ return address
|
|
mov r13, r12 @ __secondary_switched address
|
|
ldr r12, [r10, #PROCINFO_INITFUNC]
|
|
add r12, r12, r10 @ initialise processor
|
|
@ (return control reg)
|
|
ret r12
|
|
ENDPROC(secondary_startup)
|
|
ENDPROC(secondary_startup_arm)
|
|
|
|
/*
|
|
* r6 = &secondary_data
|
|
*/
|
|
ENTRY(__secondary_switched)
|
|
ldr sp, [r7, #4] @ get secondary_data.stack
|
|
mov fp, #0
|
|
b secondary_start_kernel
|
|
ENDPROC(__secondary_switched)
|
|
|
|
.align
|
|
|
|
.type __secondary_data, %object
|
|
__secondary_data:
|
|
.long .
|
|
.long secondary_data
|
|
.long __secondary_switched
|
|
#endif /* defined(CONFIG_SMP) */
|
|
|
|
|
|
|
|
/*
|
|
* Setup common bits before finally enabling the MMU. Essentially
|
|
* this is just loading the page table pointer and domain access
|
|
* registers.
|
|
*
|
|
* r0 = cp#15 control register
|
|
* r1 = machine ID
|
|
* r2 = atags or dtb pointer
|
|
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
|
|
* r9 = processor ID
|
|
* r13 = *virtual* address to jump to upon completion
|
|
*/
|
|
__enable_mmu:
|
|
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
|
|
orr r0, r0, #CR_A
|
|
#else
|
|
bic r0, r0, #CR_A
|
|
#endif
|
|
#ifdef CONFIG_CPU_DCACHE_DISABLE
|
|
bic r0, r0, #CR_C
|
|
#endif
|
|
#ifdef CONFIG_CPU_BPREDICT_DISABLE
|
|
bic r0, r0, #CR_Z
|
|
#endif
|
|
#ifdef CONFIG_CPU_ICACHE_DISABLE
|
|
bic r0, r0, #CR_I
|
|
#endif
|
|
#ifndef CONFIG_ARM_LPAE
|
|
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
|
|
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
|
|
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
|
|
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
|
|
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
|
|
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
|
|
#endif
|
|
b __turn_mmu_on
|
|
ENDPROC(__enable_mmu)
|
|
|
|
/*
|
|
* Enable the MMU. This completely changes the structure of the visible
|
|
* memory space. You will not be able to trace execution through this.
|
|
* If you have an enquiry about this, *please* check the linux-arm-kernel
|
|
* mailing list archives BEFORE sending another post to the list.
|
|
*
|
|
* r0 = cp#15 control register
|
|
* r1 = machine ID
|
|
* r2 = atags or dtb pointer
|
|
* r9 = processor ID
|
|
* r13 = *virtual* address to jump to upon completion
|
|
*
|
|
* other registers depend on the function called upon completion
|
|
*/
|
|
.align 5
|
|
.pushsection .idmap.text, "ax"
|
|
ENTRY(__turn_mmu_on)
|
|
mov r0, r0
|
|
instr_sync
|
|
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
|
mrc p15, 0, r3, c0, c0, 0 @ read id reg
|
|
instr_sync
|
|
mov r3, r3
|
|
mov r3, r13
|
|
ret r3
|
|
__turn_mmu_on_end:
|
|
ENDPROC(__turn_mmu_on)
|
|
.popsection
|
|
|
|
|
|
#ifdef CONFIG_SMP_ON_UP
|
|
__HEAD
|
|
__fixup_smp:
|
|
and r3, r9, #0x000f0000 @ architecture version
|
|
teq r3, #0x000f0000 @ CPU ID supported?
|
|
bne __fixup_smp_on_up @ no, assume UP
|
|
|
|
bic r3, r9, #0x00ff0000
|
|
bic r3, r3, #0x0000000f @ mask 0xff00fff0
|
|
mov r4, #0x41000000
|
|
orr r4, r4, #0x0000b000
|
|
orr r4, r4, #0x00000020 @ val 0x4100b020
|
|
teq r3, r4 @ ARM 11MPCore?
|
|
reteq lr @ yes, assume SMP
|
|
|
|
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
|
|
and r0, r0, #0xc0000000 @ multiprocessing extensions and
|
|
teq r0, #0x80000000 @ not part of a uniprocessor system?
|
|
bne __fixup_smp_on_up @ no, assume UP
|
|
|
|
@ Core indicates it is SMP. Check for Aegis SOC where a single
|
|
@ Cortex-A9 CPU is present but SMP operations fault.
|
|
mov r4, #0x41000000
|
|
orr r4, r4, #0x0000c000
|
|
orr r4, r4, #0x00000090
|
|
teq r3, r4 @ Check for ARM Cortex-A9
|
|
retne lr @ Not ARM Cortex-A9,
|
|
|
|
@ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
|
|
@ below address check will need to be #ifdef'd or equivalent
|
|
@ for the Aegis platform.
|
|
mrc p15, 4, r0, c15, c0 @ get SCU base address
|
|
teq r0, #0x0 @ '0' on actual UP A9 hardware
|
|
beq __fixup_smp_on_up @ So its an A9 UP
|
|
ldr r0, [r0, #4] @ read SCU Config
|
|
ARM_BE8(rev r0, r0) @ byteswap if big endian
|
|
and r0, r0, #0x3 @ number of CPUs
|
|
teq r0, #0x0 @ is 1?
|
|
retne lr
|
|
|
|
__fixup_smp_on_up:
|
|
adr r0, 1f
|
|
ldmia r0, {r3 - r5}
|
|
sub r3, r0, r3
|
|
add r4, r4, r3
|
|
add r5, r5, r3
|
|
b __do_fixup_smp_on_up
|
|
ENDPROC(__fixup_smp)
|
|
|
|
.align
|
|
1: .word .
|
|
.word __smpalt_begin
|
|
.word __smpalt_end
|
|
|
|
.pushsection .data
|
|
.globl smp_on_up
|
|
smp_on_up:
|
|
ALT_SMP(.long 1)
|
|
ALT_UP(.long 0)
|
|
.popsection
|
|
#endif
|
|
|
|
.text
|
|
__do_fixup_smp_on_up:
|
|
cmp r4, r5
|
|
reths lr
|
|
ldmia r4!, {r0, r6}
|
|
ARM( str r6, [r0, r3] )
|
|
THUMB( add r0, r0, r3 )
|
|
#ifdef __ARMEB__
|
|
THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
|
|
#endif
|
|
THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
|
|
THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
|
|
THUMB( strh r6, [r0] )
|
|
b __do_fixup_smp_on_up
|
|
ENDPROC(__do_fixup_smp_on_up)
|
|
|
|
ENTRY(fixup_smp)
|
|
stmfd sp!, {r4 - r6, lr}
|
|
mov r4, r0
|
|
add r5, r0, r1
|
|
mov r3, #0
|
|
bl __do_fixup_smp_on_up
|
|
ldmfd sp!, {r4 - r6, pc}
|
|
ENDPROC(fixup_smp)
|
|
|
|
#ifdef __ARMEB__
|
|
#define LOW_OFFSET 0x4
|
|
#define HIGH_OFFSET 0x0
|
|
#else
|
|
#define LOW_OFFSET 0x0
|
|
#define HIGH_OFFSET 0x4
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
|
|
|
|
/* __fixup_pv_table - patch the stub instructions with the delta between
|
|
* PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
|
|
* can be expressed by an immediate shifter operand. The stub instruction
|
|
* has a form of '(add|sub) rd, rn, #imm'.
|
|
*/
|
|
__HEAD
|
|
__fixup_pv_table:
|
|
adr r0, 1f
|
|
ldmia r0, {r3-r7}
|
|
mvn ip, #0
|
|
subs r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
|
|
add r4, r4, r3 @ adjust table start address
|
|
add r5, r5, r3 @ adjust table end address
|
|
add r6, r6, r3 @ adjust __pv_phys_pfn_offset address
|
|
add r7, r7, r3 @ adjust __pv_offset address
|
|
mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN
|
|
str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset
|
|
strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits
|
|
mov r6, r3, lsr #24 @ constant for add/sub instructions
|
|
teq r3, r6, lsl #24 @ must be 16MiB aligned
|
|
THUMB( it ne @ cross section branch )
|
|
bne __error
|
|
str r3, [r7, #LOW_OFFSET] @ save to __pv_offset low bits
|
|
b __fixup_a_pv_table
|
|
ENDPROC(__fixup_pv_table)
|
|
|
|
.align
|
|
1: .long .
|
|
.long __pv_table_begin
|
|
.long __pv_table_end
|
|
2: .long __pv_phys_pfn_offset
|
|
.long __pv_offset
|
|
|
|
.text
|
|
__fixup_a_pv_table:
|
|
adr r0, 3f
|
|
ldr r6, [r0]
|
|
add r6, r6, r3
|
|
ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word
|
|
ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word
|
|
mov r6, r6, lsr #24
|
|
cmn r0, #1
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
moveq r0, #0x200000 @ set bit 21, mov to mvn instruction
|
|
lsls r6, #24
|
|
beq 2f
|
|
clz r7, r6
|
|
lsr r6, #24
|
|
lsl r6, r7
|
|
bic r6, #0x0080
|
|
lsrs r7, #1
|
|
orrcs r6, #0x0080
|
|
orr r6, r6, r7, lsl #12
|
|
orr r6, #0x4000
|
|
b 2f
|
|
1: add r7, r3
|
|
ldrh ip, [r7, #2]
|
|
ARM_BE8(rev16 ip, ip)
|
|
tst ip, #0x4000
|
|
and ip, #0x8f00
|
|
orrne ip, r6 @ mask in offset bits 31-24
|
|
orreq ip, r0 @ mask in offset bits 7-0
|
|
ARM_BE8(rev16 ip, ip)
|
|
strh ip, [r7, #2]
|
|
bne 2f
|
|
ldrh ip, [r7]
|
|
ARM_BE8(rev16 ip, ip)
|
|
bic ip, #0x20
|
|
orr ip, ip, r0, lsr #16
|
|
ARM_BE8(rev16 ip, ip)
|
|
strh ip, [r7]
|
|
2: cmp r4, r5
|
|
ldrcc r7, [r4], #4 @ use branch for delay slot
|
|
bcc 1b
|
|
bx lr
|
|
#else
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction
|
|
#else
|
|
moveq r0, #0x400000 @ set bit 22, mov to mvn instruction
|
|
#endif
|
|
b 2f
|
|
1: ldr ip, [r7, r3]
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
@ in BE8, we load data in BE, but instructions still in LE
|
|
bic ip, ip, #0xff000000
|
|
tst ip, #0x000f0000 @ check the rotation field
|
|
orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24
|
|
biceq ip, ip, #0x00004000 @ clear bit 22
|
|
orreq ip, ip, r0 @ mask in offset bits 7-0
|
|
#else
|
|
bic ip, ip, #0x000000ff
|
|
tst ip, #0xf00 @ check the rotation field
|
|
orrne ip, ip, r6 @ mask in offset bits 31-24
|
|
biceq ip, ip, #0x400000 @ clear bit 22
|
|
orreq ip, ip, r0 @ mask in offset bits 7-0
|
|
#endif
|
|
str ip, [r7, r3]
|
|
2: cmp r4, r5
|
|
ldrcc r7, [r4], #4 @ use branch for delay slot
|
|
bcc 1b
|
|
ret lr
|
|
#endif
|
|
ENDPROC(__fixup_a_pv_table)
|
|
|
|
.align
|
|
3: .long __pv_offset
|
|
|
|
ENTRY(fixup_pv_table)
|
|
stmfd sp!, {r4 - r7, lr}
|
|
mov r3, #0 @ no offset
|
|
mov r4, r0 @ r0 = table start
|
|
add r5, r0, r1 @ r1 = table size
|
|
bl __fixup_a_pv_table
|
|
ldmfd sp!, {r4 - r7, pc}
|
|
ENDPROC(fixup_pv_table)
|
|
|
|
.data
|
|
.globl __pv_phys_pfn_offset
|
|
.type __pv_phys_pfn_offset, %object
|
|
__pv_phys_pfn_offset:
|
|
.word 0
|
|
.size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset
|
|
|
|
.globl __pv_offset
|
|
.type __pv_offset, %object
|
|
__pv_offset:
|
|
.quad 0
|
|
.size __pv_offset, . -__pv_offset
|
|
#endif
|
|
|
|
#include "head-common.S"
|