forked from luck/tmp_suning_uos_patched
1a59d1b8e0
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
325 lines
8.7 KiB
C
325 lines
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/kernel_stat.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/signal.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/sibyte/sb1250_regs.h>
|
|
#include <asm/sibyte/sb1250_int.h>
|
|
#include <asm/sibyte/sb1250_uart.h>
|
|
#include <asm/sibyte/sb1250_scd.h>
|
|
#include <asm/sibyte/sb1250.h>
|
|
|
|
/*
|
|
* These are the routines that handle all the low level interrupt stuff.
|
|
* Actions handled here are: initialization of the interrupt map, requesting of
|
|
* interrupt lines by handlers, dispatching if interrupts to handlers, probing
|
|
* for interrupt lines
|
|
*/
|
|
|
|
#ifdef CONFIG_SIBYTE_HAS_LDT
|
|
extern unsigned long ldt_eoi_space;
|
|
#endif
|
|
|
|
/* Store the CPU id (not the logical number) */
|
|
int sb1250_irq_owner[SB1250_NR_IRQS];
|
|
|
|
static DEFINE_RAW_SPINLOCK(sb1250_imr_lock);
|
|
|
|
void sb1250_mask_irq(int cpu, int irq)
|
|
{
|
|
unsigned long flags;
|
|
u64 cur_ints;
|
|
|
|
raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
cur_ints |= (((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
|
|
}
|
|
|
|
void sb1250_unmask_irq(int cpu, int irq)
|
|
{
|
|
unsigned long flags;
|
|
u64 cur_ints;
|
|
|
|
raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
cur_ints &= ~(((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask,
|
|
bool force)
|
|
{
|
|
int i = 0, old_cpu, cpu, int_on;
|
|
unsigned int irq = d->irq;
|
|
u64 cur_ints;
|
|
unsigned long flags;
|
|
|
|
i = cpumask_first_and(mask, cpu_online_mask);
|
|
|
|
/* Convert logical CPU to physical CPU */
|
|
cpu = cpu_logical_map(i);
|
|
|
|
/* Protect against other affinity changers and IMR manipulation */
|
|
raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
|
|
|
|
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
|
|
old_cpu = sb1250_irq_owner[irq];
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
int_on = !(cur_ints & (((u64) 1) << irq));
|
|
if (int_on) {
|
|
/* If it was on, mask it */
|
|
cur_ints |= (((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
}
|
|
sb1250_irq_owner[irq] = cpu;
|
|
if (int_on) {
|
|
/* unmask for the new CPU */
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
cur_ints &= ~(((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
}
|
|
raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void disable_sb1250_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
|
|
sb1250_mask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
|
|
static void enable_sb1250_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
|
|
sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
|
|
|
|
static void ack_sb1250_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
#ifdef CONFIG_SIBYTE_HAS_LDT
|
|
u64 pending;
|
|
|
|
/*
|
|
* If the interrupt was an HT interrupt, now is the time to
|
|
* clear it. NOTE: we assume the HT bridge was set up to
|
|
* deliver the interrupts to all CPUs (which makes affinity
|
|
* changing easier for us)
|
|
*/
|
|
pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
|
|
R_IMR_LDT_INTERRUPT)));
|
|
pending &= ((u64)1 << (irq));
|
|
if (pending) {
|
|
int i;
|
|
for (i=0; i<NR_CPUS; i++) {
|
|
int cpu;
|
|
#ifdef CONFIG_SMP
|
|
cpu = cpu_logical_map(i);
|
|
#else
|
|
cpu = i;
|
|
#endif
|
|
/*
|
|
* Clear for all CPUs so an affinity switch
|
|
* doesn't find an old status
|
|
*/
|
|
__raw_writeq(pending,
|
|
IOADDR(A_IMR_REGISTER(cpu,
|
|
R_IMR_LDT_INTERRUPT_CLR)));
|
|
}
|
|
|
|
/*
|
|
* Generate EOI. For Pass 1 parts, EOI is a nop. For
|
|
* Pass 2, the LDT world may be edge-triggered, but
|
|
* this EOI shouldn't hurt. If they are
|
|
* level-sensitive, the EOI is required.
|
|
*/
|
|
*(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
|
|
}
|
|
#endif
|
|
sb1250_mask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
|
|
static struct irq_chip sb1250_irq_type = {
|
|
.name = "SB1250-IMR",
|
|
.irq_mask_ack = ack_sb1250_irq,
|
|
.irq_unmask = enable_sb1250_irq,
|
|
.irq_mask = disable_sb1250_irq,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = sb1250_set_affinity
|
|
#endif
|
|
};
|
|
|
|
void __init init_sb1250_irqs(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SB1250_NR_IRQS; i++) {
|
|
irq_set_chip_and_handler(i, &sb1250_irq_type,
|
|
handle_level_irq);
|
|
sb1250_irq_owner[i] = 0;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* arch_init_irq is called early in the boot sequence from init/main.c via
|
|
* init_IRQ. It is responsible for setting up the interrupt mapper and
|
|
* installing the handler that will be responsible for dispatching interrupts
|
|
* to the "right" place.
|
|
*/
|
|
/*
|
|
* For now, map all interrupts to IP[2]. We could save
|
|
* some cycles by parceling out system interrupts to different
|
|
* IP lines, but keep it simple for bringup. We'll also direct
|
|
* all interrupts to a single CPU; we should probably route
|
|
* PCI and LDT to one cpu and everything else to the other
|
|
* to balance the load a bit.
|
|
*
|
|
* On the second cpu, everything is set to IP5, which is
|
|
* ignored, EXCEPT the mailbox interrupt. That one is
|
|
* set to IP[2] so it is handled. This is needed so we
|
|
* can do cross-cpu function calls, as required by SMP
|
|
*/
|
|
|
|
#define IMR_IP2_VAL K_INT_MAP_I0
|
|
#define IMR_IP3_VAL K_INT_MAP_I1
|
|
#define IMR_IP4_VAL K_INT_MAP_I2
|
|
#define IMR_IP5_VAL K_INT_MAP_I3
|
|
#define IMR_IP6_VAL K_INT_MAP_I4
|
|
|
|
void __init arch_init_irq(void)
|
|
{
|
|
|
|
unsigned int i;
|
|
u64 tmp;
|
|
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
|
|
STATUSF_IP1 | STATUSF_IP0;
|
|
|
|
/* Default everything to IP2 */
|
|
for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */
|
|
__raw_writeq(IMR_IP2_VAL,
|
|
IOADDR(A_IMR_REGISTER(0,
|
|
R_IMR_INTERRUPT_MAP_BASE) +
|
|
(i << 3)));
|
|
__raw_writeq(IMR_IP2_VAL,
|
|
IOADDR(A_IMR_REGISTER(1,
|
|
R_IMR_INTERRUPT_MAP_BASE) +
|
|
(i << 3)));
|
|
}
|
|
|
|
init_sb1250_irqs();
|
|
|
|
/*
|
|
* Map the high 16 bits of the mailbox registers to IP[3], for
|
|
* inter-cpu messages
|
|
*/
|
|
/* Was I1 */
|
|
__raw_writeq(IMR_IP3_VAL,
|
|
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
|
|
(K_INT_MBOX_0 << 3)));
|
|
__raw_writeq(IMR_IP3_VAL,
|
|
IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
|
|
(K_INT_MBOX_0 << 3)));
|
|
|
|
/* Clear the mailboxes. The firmware may leave them dirty */
|
|
__raw_writeq(0xffffffffffffffffULL,
|
|
IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
|
|
__raw_writeq(0xffffffffffffffffULL,
|
|
IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
|
|
|
|
/* Mask everything except the mailbox registers for both cpus */
|
|
tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
|
|
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
|
|
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
|
|
|
|
/*
|
|
* Note that the timer interrupts are also mapped, but this is
|
|
* done in sb1250_time_init(). Also, the profiling driver
|
|
* does its own management of IP7.
|
|
*/
|
|
|
|
/* Enable necessary IPs, disable the rest */
|
|
change_c0_status(ST0_IM, imask);
|
|
}
|
|
|
|
extern void sb1250_mailbox_interrupt(void);
|
|
|
|
static inline void dispatch_ip2(void)
|
|
{
|
|
unsigned int cpu = smp_processor_id();
|
|
unsigned long long mask;
|
|
|
|
/*
|
|
* Default...we've hit an IP[2] interrupt, which means we've got to
|
|
* check the 1250 interrupt registers to figure out what to do. Need
|
|
* to detect which CPU we're on, now that smp_affinity is supported.
|
|
*/
|
|
mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
|
|
R_IMR_INTERRUPT_STATUS_BASE)));
|
|
if (mask)
|
|
do_IRQ(fls64(mask) - 1);
|
|
}
|
|
|
|
asmlinkage void plat_irq_dispatch(void)
|
|
{
|
|
unsigned int cpu = smp_processor_id();
|
|
unsigned int pending;
|
|
|
|
/*
|
|
* What a pain. We have to be really careful saving the upper 32 bits
|
|
* of any * register across function calls if we don't want them
|
|
* trashed--since were running in -o32, the calling routing never saves
|
|
* the full 64 bits of a register across a function call. Being the
|
|
* interrupt handler, we're guaranteed that interrupts are disabled
|
|
* during this code so we don't have to worry about random interrupts
|
|
* blasting the high 32 bits.
|
|
*/
|
|
|
|
pending = read_c0_cause() & read_c0_status() & ST0_IM;
|
|
|
|
if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
|
|
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
|
|
else if (pending & CAUSEF_IP4)
|
|
do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */
|
|
|
|
#ifdef CONFIG_SMP
|
|
else if (pending & CAUSEF_IP3)
|
|
sb1250_mailbox_interrupt();
|
|
#endif
|
|
|
|
else if (pending & CAUSEF_IP2)
|
|
dispatch_ip2();
|
|
else
|
|
spurious_interrupt();
|
|
}
|