kernel_optimize_test

History

Anton Vorontsov e85477f516 powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards TSEC0 is connected to Vitesse 7385 5-port switch. The switch isn't connected to any mdio bus, the link to the switch is fixed to Full-duplex 1000 Mb/s (no pause). This patch fixes following failure during bootup: mdio@24520:01 not found eth0: Could not attach to PHY IP-Config: Failed to open eth0 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>		2009-02-06 10:38:57 -06:00
..
dtc-src
dts	powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards	2009-02-06 10:38:57 -06:00
libfdt	powerpc: Fix bug in kernel copy of libfdt's fdt_subnode_offset_namelen()	2008-10-31 20:14:19 +11:00
.gitignore
4xx.c
4xx.h
44x.h
addnote.c	Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"	2008-10-31 22:36:21 +11:00
addRamDisk.c
bamboo.c
cpm-serial.c
crt0.S
crtsavres.S
cuboot-8xx.c
cuboot-52xx.c	powerpc/52xx: Make cuImage more robust in locating immr node.	2008-10-15 11:09:59 -06:00
cuboot-83xx.c
cuboot-85xx-cpm2.c
cuboot-85xx.c
cuboot-824x.c
cuboot-acadia.c	powerpc/40x: Add cuboot wrapper for Acadia board	2008-10-17 10:31:19 -04:00
cuboot-bamboo.c
cuboot-c2k.c
cuboot-ebony.c
cuboot-katmai.c
cuboot-mpc7448hpc2.c
cuboot-pq2.c
cuboot-rainier.c
cuboot-sam440ep.c
cuboot-sequoia.c
cuboot-taishan.c
cuboot-warp.c	powerpc/44x: Warp patches for the new NDFC driver	2009-01-20 08:17:21 -05:00
cuboot-yosemite.c
cuboot.c
cuboot.h
dcr.h
devtree.c	powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use	2008-12-21 14:21:17 +11:00
div64.S
dummy.c
ebony.c
elf_util.c	powerpc: Make the 64-bit kernel as a position-independent executable	2008-09-15 11:08:38 -07:00
elf.h
ep88xc.c
ep405.c
ep8248e.c
fixed-head.S
flatdevtree_env.h
fsl-soc.c
fsl-soc.h
gunzip_util.c
gunzip_util.h
hack-coff.c
holly.c
install.sh	powerpc: Copy bootable images in the default install script	2009-01-08 16:25:09 +11:00
io.h
libfdt_env.h
libfdt-wrapper.c	powerpc/boot: Allocate more memory for dtb	2008-11-06 09:49:43 +11:00
main.c	powerpc: Fix format string warning in arch/powerpc/boot/main.c	2008-10-31 20:14:19 +11:00
Makefile	powerpc: Copy bootable images in the default install script	2009-01-08 16:25:09 +11:00
mktree.c
mpc8xx.c
mpc8xx.h
mpc52xx-psc.c
mpsc.c
mv64x60_i2c.c
mv64x60.c
mv64x60.h
ns16550.c
of.c
of.h
ofconsole.c
oflib.c
ops.h	powerpc: Add del_node() for early boot code to prune inapplicable devices.	2008-10-22 15:01:21 +11:00
page.h
planetcore.c
planetcore.h
ppc_asm.h
ppcboot.h
pq2.c
pq2.h
prpmc2800.c
ps3-head.S
ps3-hvcall.S
ps3.c
README
redboot-8xx.c
redboot-83xx.c
redboot.h
reg.h
rs6000.h
serial.c
simple_alloc.c
simpleboot.c
stdio.c
stdio.h
stdlib.c
stdlib.h
string.h
string.S	powerpc: Fix boot wrapper memcmp() called with zero length argument	2008-10-21 15:17:48 +11:00
treeboot-bamboo.c
treeboot-ebony.c
treeboot-walnut.c
types.h
uartlite.c
util.S
virtex405-head.S
virtex.c
wrapper	Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"	2008-10-31 22:36:21 +11:00
zImage.coff.lds.S
zImage.lds.S
zImage.ps3.lds.S

README

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter