kernel_optimize_test/fs/binfmt_aout.c
David Howells 7fa3031500 aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUT
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.

Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case.  Not
only that, but under such conditions A.OUT core dumps are not produced either.

To make this work, this patch also does the following:

 (1) Makes the existence of the contents of linux/a.out.h contingent on
     CONFIG_ARCH_SUPPORTS_AOUT.

 (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
     core dumping code.

 (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline.  This
     is then included only where needed.  This means that this bit of arch
     code will be stored in the appropriate A.OUT binfmt module rather than
     the core kernel.

 (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
     needed) and FRV.

This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.

[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00

559 lines
15 KiB
C

/*
* linux/fs/binfmt_aout.c
*
* Copyright (C) 1991, 1992, 1996 Linus Torvalds
*/
#include <linux/module.h>
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/stat.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/slab.h>
#include <linux/binfmts.h>
#include <linux/personality.h>
#include <linux/init.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/a.out-core.h>
static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs);
static int load_aout_library(struct file*);
static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit);
static struct linux_binfmt aout_format = {
.module = THIS_MODULE,
.load_binary = load_aout_binary,
.load_shlib = load_aout_library,
.core_dump = aout_core_dump,
.min_coredump = PAGE_SIZE
};
#define BAD_ADDR(x) ((unsigned long)(x) >= TASK_SIZE)
static int set_brk(unsigned long start, unsigned long end)
{
start = PAGE_ALIGN(start);
end = PAGE_ALIGN(end);
if (end > start) {
unsigned long addr;
down_write(&current->mm->mmap_sem);
addr = do_brk(start, end - start);
up_write(&current->mm->mmap_sem);
if (BAD_ADDR(addr))
return addr;
}
return 0;
}
/*
* These are the only things you should do on a core-file: use only these
* macros to write out all the necessary info.
*/
static int dump_write(struct file *file, const void *addr, int nr)
{
return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
}
#define DUMP_WRITE(addr, nr) \
if (!dump_write(file, (void *)(addr), (nr))) \
goto end_coredump;
#define DUMP_SEEK(offset) \
if (file->f_op->llseek) { \
if (file->f_op->llseek(file,(offset),0) != (offset)) \
goto end_coredump; \
} else file->f_pos = (offset)
/*
* Routine writes a core dump image in the current directory.
* Currently only a stub-function.
*
* Note that setuid/setgid files won't make a core-dump if the uid/gid
* changed due to the set[u|g]id. It's enforced by the "current->mm->dumpable"
* field, which also makes sure the core-dumps won't be recursive if the
* dumping of the process results in another error..
*/
static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
{
mm_segment_t fs;
int has_dumped = 0;
unsigned long dump_start, dump_size;
struct user dump;
#if defined(__alpha__)
# define START_DATA(u) (u.start_data)
#elif defined(__arm__)
# define START_DATA(u) ((u.u_tsize << PAGE_SHIFT) + u.start_code)
#elif defined(__sparc__)
# define START_DATA(u) (u.u_tsize)
#elif defined(__i386__) || defined(__mc68000__) || defined(__arch_um__)
# define START_DATA(u) (u.u_tsize << PAGE_SHIFT)
#endif
#ifdef __sparc__
# define START_STACK(u) ((regs->u_regs[UREG_FP]) & ~(PAGE_SIZE - 1))
#else
# define START_STACK(u) (u.start_stack)
#endif
fs = get_fs();
set_fs(KERNEL_DS);
has_dumped = 1;
current->flags |= PF_DUMPCORE;
strncpy(dump.u_comm, current->comm, sizeof(dump.u_comm));
#ifndef __sparc__
dump.u_ar0 = offsetof(struct user, regs);
#endif
dump.signal = signr;
aout_dump_thread(regs, &dump);
/* If the size of the dump file exceeds the rlimit, then see what would happen
if we wrote the stack, but not the data area. */
#ifdef __sparc__
if ((dump.u_dsize + dump.u_ssize) > limit)
dump.u_dsize = 0;
#else
if ((dump.u_dsize + dump.u_ssize+1) * PAGE_SIZE > limit)
dump.u_dsize = 0;
#endif
/* Make sure we have enough room to write the stack and data areas. */
#ifdef __sparc__
if (dump.u_ssize > limit)
dump.u_ssize = 0;
#else
if ((dump.u_ssize + 1) * PAGE_SIZE > limit)
dump.u_ssize = 0;
#endif
/* make sure we actually have a data and stack area to dump */
set_fs(USER_DS);
#ifdef __sparc__
if (!access_ok(VERIFY_READ, (void __user *)START_DATA(dump), dump.u_dsize))
dump.u_dsize = 0;
if (!access_ok(VERIFY_READ, (void __user *)START_STACK(dump), dump.u_ssize))
dump.u_ssize = 0;
#else
if (!access_ok(VERIFY_READ, (void __user *)START_DATA(dump), dump.u_dsize << PAGE_SHIFT))
dump.u_dsize = 0;
if (!access_ok(VERIFY_READ, (void __user *)START_STACK(dump), dump.u_ssize << PAGE_SHIFT))
dump.u_ssize = 0;
#endif
set_fs(KERNEL_DS);
/* struct user */
DUMP_WRITE(&dump,sizeof(dump));
/* Now dump all of the user data. Include malloced stuff as well */
#ifndef __sparc__
DUMP_SEEK(PAGE_SIZE);
#endif
/* now we start writing out the user space info */
set_fs(USER_DS);
/* Dump the data area */
if (dump.u_dsize != 0) {
dump_start = START_DATA(dump);
#ifdef __sparc__
dump_size = dump.u_dsize;
#else
dump_size = dump.u_dsize << PAGE_SHIFT;
#endif
DUMP_WRITE(dump_start,dump_size);
}
/* Now prepare to dump the stack area */
if (dump.u_ssize != 0) {
dump_start = START_STACK(dump);
#ifdef __sparc__
dump_size = dump.u_ssize;
#else
dump_size = dump.u_ssize << PAGE_SHIFT;
#endif
DUMP_WRITE(dump_start,dump_size);
}
/* Finally dump the task struct. Not be used by gdb, but could be useful */
set_fs(KERNEL_DS);
DUMP_WRITE(current,sizeof(*current));
end_coredump:
set_fs(fs);
return has_dumped;
}
/*
* create_aout_tables() parses the env- and arg-strings in new user
* memory and creates the pointer tables from them, and puts their
* addresses on the "stack", returning the new stack pointer value.
*/
static unsigned long __user *create_aout_tables(char __user *p, struct linux_binprm * bprm)
{
char __user * __user *argv;
char __user * __user *envp;
unsigned long __user *sp;
int argc = bprm->argc;
int envc = bprm->envc;
sp = (void __user *)((-(unsigned long)sizeof(char *)) & (unsigned long) p);
#ifdef __sparc__
/* This imposes the proper stack alignment for a new process. */
sp = (void __user *) (((unsigned long) sp) & ~7);
if ((envc+argc+3)&1) --sp;
#endif
#ifdef __alpha__
/* whee.. test-programs are so much fun. */
put_user(0, --sp);
put_user(0, --sp);
if (bprm->loader) {
put_user(0, --sp);
put_user(0x3eb, --sp);
put_user(bprm->loader, --sp);
put_user(0x3ea, --sp);
}
put_user(bprm->exec, --sp);
put_user(0x3e9, --sp);
#endif
sp -= envc+1;
envp = (char __user * __user *) sp;
sp -= argc+1;
argv = (char __user * __user *) sp;
#if defined(__i386__) || defined(__mc68000__) || defined(__arm__) || defined(__arch_um__)
put_user((unsigned long) envp,--sp);
put_user((unsigned long) argv,--sp);
#endif
put_user(argc,--sp);
current->mm->arg_start = (unsigned long) p;
while (argc-->0) {
char c;
put_user(p,argv++);
do {
get_user(c,p++);
} while (c);
}
put_user(NULL,argv);
current->mm->arg_end = current->mm->env_start = (unsigned long) p;
while (envc-->0) {
char c;
put_user(p,envp++);
do {
get_user(c,p++);
} while (c);
}
put_user(NULL,envp);
current->mm->env_end = (unsigned long) p;
return sp;
}
/*
* These are the functions used to load a.out style executables and shared
* libraries. There is no binary dependent code anywhere else.
*/
static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
{
struct exec ex;
unsigned long error;
unsigned long fd_offset;
unsigned long rlim;
int retval;
ex = *((struct exec *) bprm->buf); /* exec-header */
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
N_TRSIZE(ex) || N_DRSIZE(ex) ||
i_size_read(bprm->file->f_path.dentry->d_inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
return -ENOEXEC;
}
/*
* Requires a mmap handler. This prevents people from using a.out
* as part of an exploit attack against /proc-related vulnerabilities.
*/
if (!bprm->file->f_op || !bprm->file->f_op->mmap)
return -ENOEXEC;
fd_offset = N_TXTOFF(ex);
/* Check initial limits. This avoids letting people circumvent
* size limits imposed on them by creating programs with large
* arrays in the data or bss.
*/
rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
if (rlim >= RLIM_INFINITY)
rlim = ~0;
if (ex.a_data + ex.a_bss > rlim)
return -ENOMEM;
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
return retval;
/* OK, This is the point of no return */
#if defined(__alpha__)
SET_AOUT_PERSONALITY(bprm, ex);
#elif defined(__sparc__)
set_personality(PER_SUNOS);
#if !defined(__sparc_v9__)
memcpy(&current->thread.core_exec, &ex, sizeof(struct exec));
#endif
#else
set_personality(PER_LINUX);
#endif
current->mm->end_code = ex.a_text +
(current->mm->start_code = N_TXTADDR(ex));
current->mm->end_data = ex.a_data +
(current->mm->start_data = N_DATADDR(ex));
current->mm->brk = ex.a_bss +
(current->mm->start_brk = N_BSSADDR(ex));
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
#ifdef __sparc__
if (N_MAGIC(ex) == NMAGIC) {
loff_t pos = fd_offset;
/* Fuck me plenty... */
/* <AOL></AOL> */
down_write(&current->mm->mmap_sem);
error = do_brk(N_TXTADDR(ex), ex.a_text);
up_write(&current->mm->mmap_sem);
bprm->file->f_op->read(bprm->file, (char *) N_TXTADDR(ex),
ex.a_text, &pos);
down_write(&current->mm->mmap_sem);
error = do_brk(N_DATADDR(ex), ex.a_data);
up_write(&current->mm->mmap_sem);
bprm->file->f_op->read(bprm->file, (char *) N_DATADDR(ex),
ex.a_data, &pos);
goto beyond_if;
}
#endif
if (N_MAGIC(ex) == OMAGIC) {
unsigned long text_addr, map_size;
loff_t pos;
text_addr = N_TXTADDR(ex);
#if defined(__alpha__) || defined(__sparc__)
pos = fd_offset;
map_size = ex.a_text+ex.a_data + PAGE_SIZE - 1;
#else
pos = 32;
map_size = ex.a_text+ex.a_data;
#endif
down_write(&current->mm->mmap_sem);
error = do_brk(text_addr & PAGE_MASK, map_size);
up_write(&current->mm->mmap_sem);
if (error != (text_addr & PAGE_MASK)) {
send_sig(SIGKILL, current, 0);
return error;
}
error = bprm->file->f_op->read(bprm->file,
(char __user *)text_addr,
ex.a_text+ex.a_data, &pos);
if ((signed long)error < 0) {
send_sig(SIGKILL, current, 0);
return error;
}
flush_icache_range(text_addr, text_addr+ex.a_text+ex.a_data);
} else {
static unsigned long error_time, error_time2;
if ((ex.a_text & 0xfff || ex.a_data & 0xfff) &&
(N_MAGIC(ex) != NMAGIC) && (jiffies-error_time2) > 5*HZ)
{
printk(KERN_NOTICE "executable not page aligned\n");
error_time2 = jiffies;
}
if ((fd_offset & ~PAGE_MASK) != 0 &&
(jiffies-error_time) > 5*HZ)
{
printk(KERN_WARNING
"fd_offset is not page aligned. Please convert program: %s\n",
bprm->file->f_path.dentry->d_name.name);
error_time = jiffies;
}
if (!bprm->file->f_op->mmap||((fd_offset & ~PAGE_MASK) != 0)) {
loff_t pos = fd_offset;
down_write(&current->mm->mmap_sem);
do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
up_write(&current->mm->mmap_sem);
bprm->file->f_op->read(bprm->file,
(char __user *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
flush_icache_range((unsigned long) N_TXTADDR(ex),
(unsigned long) N_TXTADDR(ex) +
ex.a_text+ex.a_data);
goto beyond_if;
}
down_write(&current->mm->mmap_sem);
error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset);
up_write(&current->mm->mmap_sem);
if (error != N_TXTADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
down_write(&current->mm->mmap_sem);
error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset + ex.a_text);
up_write(&current->mm->mmap_sem);
if (error != N_DATADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
}
beyond_if:
set_binfmt(&aout_format);
retval = set_brk(current->mm->start_brk, current->mm->brk);
if (retval < 0) {
send_sig(SIGKILL, current, 0);
return retval;
}
retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
if (retval < 0) {
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
current->mm->start_stack =
(unsigned long) create_aout_tables((char __user *) bprm->p, bprm);
#ifdef __alpha__
regs->gp = ex.a_gpvalue;
#endif
start_thread(regs, ex.a_entry, current->mm->start_stack);
if (unlikely(current->ptrace & PT_PTRACED)) {
if (current->ptrace & PT_TRACE_EXEC)
ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
else
send_sig(SIGTRAP, current, 0);
}
return 0;
}
static int load_aout_library(struct file *file)
{
struct inode * inode;
unsigned long bss, start_addr, len;
unsigned long error;
int retval;
struct exec ex;
inode = file->f_path.dentry->d_inode;
retval = -ENOEXEC;
error = kernel_read(file, 0, (char *) &ex, sizeof(ex));
if (error != sizeof(ex))
goto out;
/* We come in here for the regular a.out style of shared libraries */
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != QMAGIC) || N_TRSIZE(ex) ||
N_DRSIZE(ex) || ((ex.a_entry & 0xfff) && N_MAGIC(ex) == ZMAGIC) ||
i_size_read(inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
goto out;
}
/*
* Requires a mmap handler. This prevents people from using a.out
* as part of an exploit attack against /proc-related vulnerabilities.
*/
if (!file->f_op || !file->f_op->mmap)
goto out;
if (N_FLAGS(ex))
goto out;
/* For QMAGIC, the starting address is 0x20 into the page. We mask
this off to get the starting address for the page */
start_addr = ex.a_entry & 0xfffff000;
if ((N_TXTOFF(ex) & ~PAGE_MASK) != 0) {
static unsigned long error_time;
loff_t pos = N_TXTOFF(ex);
if ((jiffies-error_time) > 5*HZ)
{
printk(KERN_WARNING
"N_TXTOFF is not page aligned. Please convert library: %s\n",
file->f_path.dentry->d_name.name);
error_time = jiffies;
}
down_write(&current->mm->mmap_sem);
do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
up_write(&current->mm->mmap_sem);
file->f_op->read(file, (char __user *)start_addr,
ex.a_text + ex.a_data, &pos);
flush_icache_range((unsigned long) start_addr,
(unsigned long) start_addr + ex.a_text + ex.a_data);
retval = 0;
goto out;
}
/* Now use mmap to map the library into memory. */
down_write(&current->mm->mmap_sem);
error = do_mmap(file, start_addr, ex.a_text + ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
N_TXTOFF(ex));
up_write(&current->mm->mmap_sem);
retval = error;
if (error != start_addr)
goto out;
len = PAGE_ALIGN(ex.a_text + ex.a_data);
bss = ex.a_text + ex.a_data + ex.a_bss;
if (bss > len) {
down_write(&current->mm->mmap_sem);
error = do_brk(start_addr + len, bss - len);
up_write(&current->mm->mmap_sem);
retval = error;
if (error != start_addr + len)
goto out;
}
retval = 0;
out:
return retval;
}
static int __init init_aout_binfmt(void)
{
return register_binfmt(&aout_format);
}
static void __exit exit_aout_binfmt(void)
{
unregister_binfmt(&aout_format);
}
core_initcall(init_aout_binfmt);
module_exit(exit_aout_binfmt);
MODULE_LICENSE("GPL");