forked from luck/tmp_suning_uos_patched
8853c95e99
The dev_of_node function should be preferred. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Pavel Machek <pavel@ucw.cz>
619 lines
15 KiB
C
619 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* LP5562 LED driver
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments
|
|
*
|
|
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_data/leds-lp55xx.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "leds-lp55xx-common.h"
|
|
|
|
#define LP5562_PROGRAM_LENGTH 32
|
|
#define LP5562_MAX_LEDS 4
|
|
|
|
/* ENABLE Register 00h */
|
|
#define LP5562_REG_ENABLE 0x00
|
|
#define LP5562_EXEC_ENG1_M 0x30
|
|
#define LP5562_EXEC_ENG2_M 0x0C
|
|
#define LP5562_EXEC_ENG3_M 0x03
|
|
#define LP5562_EXEC_M 0x3F
|
|
#define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
|
|
#define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
|
|
#define LP5562_EXEC_RUN 0x2A
|
|
#define LP5562_ENABLE_DEFAULT \
|
|
(LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
|
|
#define LP5562_ENABLE_RUN_PROGRAM \
|
|
(LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
|
|
|
|
/* OPMODE Register 01h */
|
|
#define LP5562_REG_OP_MODE 0x01
|
|
#define LP5562_MODE_ENG1_M 0x30
|
|
#define LP5562_MODE_ENG2_M 0x0C
|
|
#define LP5562_MODE_ENG3_M 0x03
|
|
#define LP5562_LOAD_ENG1 0x10
|
|
#define LP5562_LOAD_ENG2 0x04
|
|
#define LP5562_LOAD_ENG3 0x01
|
|
#define LP5562_RUN_ENG1 0x20
|
|
#define LP5562_RUN_ENG2 0x08
|
|
#define LP5562_RUN_ENG3 0x02
|
|
#define LP5562_ENG1_IS_LOADING(mode) \
|
|
((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
|
|
#define LP5562_ENG2_IS_LOADING(mode) \
|
|
((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
|
|
#define LP5562_ENG3_IS_LOADING(mode) \
|
|
((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
|
|
|
|
/* BRIGHTNESS Registers */
|
|
#define LP5562_REG_R_PWM 0x04
|
|
#define LP5562_REG_G_PWM 0x03
|
|
#define LP5562_REG_B_PWM 0x02
|
|
#define LP5562_REG_W_PWM 0x0E
|
|
|
|
/* CURRENT Registers */
|
|
#define LP5562_REG_R_CURRENT 0x07
|
|
#define LP5562_REG_G_CURRENT 0x06
|
|
#define LP5562_REG_B_CURRENT 0x05
|
|
#define LP5562_REG_W_CURRENT 0x0F
|
|
|
|
/* CONFIG Register 08h */
|
|
#define LP5562_REG_CONFIG 0x08
|
|
#define LP5562_PWM_HF 0x40
|
|
#define LP5562_PWRSAVE_EN 0x20
|
|
#define LP5562_CLK_INT 0x01 /* Internal clock */
|
|
#define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
|
|
|
|
/* RESET Register 0Dh */
|
|
#define LP5562_REG_RESET 0x0D
|
|
#define LP5562_RESET 0xFF
|
|
|
|
/* PROGRAM ENGINE Registers */
|
|
#define LP5562_REG_PROG_MEM_ENG1 0x10
|
|
#define LP5562_REG_PROG_MEM_ENG2 0x30
|
|
#define LP5562_REG_PROG_MEM_ENG3 0x50
|
|
|
|
/* LEDMAP Register 70h */
|
|
#define LP5562_REG_ENG_SEL 0x70
|
|
#define LP5562_ENG_SEL_PWM 0
|
|
#define LP5562_ENG_FOR_RGB_M 0x3F
|
|
#define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
|
|
#define LP5562_ENG_FOR_W_M 0xC0
|
|
#define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
|
|
#define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
|
|
#define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
|
|
|
|
/* Program Commands */
|
|
#define LP5562_CMD_DISABLE 0x00
|
|
#define LP5562_CMD_LOAD 0x15
|
|
#define LP5562_CMD_RUN 0x2A
|
|
#define LP5562_CMD_DIRECT 0x3F
|
|
#define LP5562_PATTERN_OFF 0
|
|
|
|
static inline void lp5562_wait_opmode_done(void)
|
|
{
|
|
/* operation mode change needs to be longer than 153 us */
|
|
usleep_range(200, 300);
|
|
}
|
|
|
|
static inline void lp5562_wait_enable_done(void)
|
|
{
|
|
/* it takes more 488 us to update ENABLE register */
|
|
usleep_range(500, 600);
|
|
}
|
|
|
|
static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
|
|
{
|
|
static const u8 addr[] = {
|
|
LP5562_REG_R_CURRENT,
|
|
LP5562_REG_G_CURRENT,
|
|
LP5562_REG_B_CURRENT,
|
|
LP5562_REG_W_CURRENT,
|
|
};
|
|
|
|
led->led_current = led_current;
|
|
lp55xx_write(led->chip, addr[led->chan_nr], led_current);
|
|
}
|
|
|
|
static void lp5562_load_engine(struct lp55xx_chip *chip)
|
|
{
|
|
enum lp55xx_engine_index idx = chip->engine_idx;
|
|
static const u8 mask[] = {
|
|
[LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
|
|
[LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
|
|
[LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
|
|
};
|
|
|
|
static const u8 val[] = {
|
|
[LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
|
|
[LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
|
|
[LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
|
|
};
|
|
|
|
lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
|
|
|
|
lp5562_wait_opmode_done();
|
|
}
|
|
|
|
static void lp5562_stop_engine(struct lp55xx_chip *chip)
|
|
{
|
|
lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
|
|
lp5562_wait_opmode_done();
|
|
}
|
|
|
|
static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
|
|
{
|
|
int ret;
|
|
u8 mode;
|
|
u8 exec;
|
|
|
|
/* stop engine */
|
|
if (!start) {
|
|
lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
|
|
lp5562_wait_enable_done();
|
|
lp5562_stop_engine(chip);
|
|
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
|
|
lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
|
|
lp5562_wait_opmode_done();
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* To run the engine,
|
|
* operation mode and enable register should updated at the same time
|
|
*/
|
|
|
|
ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
|
|
if (ret)
|
|
return;
|
|
|
|
ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
|
|
if (ret)
|
|
return;
|
|
|
|
/* change operation mode to RUN only when each engine is loading */
|
|
if (LP5562_ENG1_IS_LOADING(mode)) {
|
|
mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
|
|
exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
|
|
}
|
|
|
|
if (LP5562_ENG2_IS_LOADING(mode)) {
|
|
mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
|
|
exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
|
|
}
|
|
|
|
if (LP5562_ENG3_IS_LOADING(mode)) {
|
|
mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
|
|
exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
|
|
}
|
|
|
|
lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
|
|
lp5562_wait_opmode_done();
|
|
|
|
lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
|
|
lp5562_wait_enable_done();
|
|
}
|
|
|
|
static int lp5562_update_firmware(struct lp55xx_chip *chip,
|
|
const u8 *data, size_t size)
|
|
{
|
|
enum lp55xx_engine_index idx = chip->engine_idx;
|
|
u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
|
|
static const u8 addr[] = {
|
|
[LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
|
|
[LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
|
|
[LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
|
|
};
|
|
unsigned cmd;
|
|
char c[3];
|
|
int program_size;
|
|
int nrchars;
|
|
int offset = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
/* clear program memory before updating */
|
|
for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
|
|
lp55xx_write(chip, addr[idx] + i, 0);
|
|
|
|
i = 0;
|
|
while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
|
|
/* separate sscanfs because length is working only for %s */
|
|
ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
|
|
if (ret != 1)
|
|
goto err;
|
|
|
|
ret = sscanf(c, "%2x", &cmd);
|
|
if (ret != 1)
|
|
goto err;
|
|
|
|
pattern[i] = (u8)cmd;
|
|
offset += nrchars;
|
|
i++;
|
|
}
|
|
|
|
/* Each instruction is 16bit long. Check that length is even */
|
|
if (i % 2)
|
|
goto err;
|
|
|
|
program_size = i;
|
|
for (i = 0; i < program_size; i++)
|
|
lp55xx_write(chip, addr[idx] + i, pattern[i]);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(&chip->cl->dev, "wrong pattern format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
|
|
{
|
|
const struct firmware *fw = chip->fw;
|
|
|
|
/*
|
|
* the firmware is encoded in ascii hex character, with 2 chars
|
|
* per byte
|
|
*/
|
|
if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
|
|
dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
|
|
fw->size);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Program memory sequence
|
|
* 1) set engine mode to "LOAD"
|
|
* 2) write firmware data into program memory
|
|
*/
|
|
|
|
lp5562_load_engine(chip);
|
|
lp5562_update_firmware(chip, fw->data, fw->size);
|
|
}
|
|
|
|
static int lp5562_post_init_device(struct lp55xx_chip *chip)
|
|
{
|
|
int ret;
|
|
u8 cfg = LP5562_DEFAULT_CFG;
|
|
|
|
/* Set all PWMs to direct control mode */
|
|
ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lp5562_wait_opmode_done();
|
|
|
|
/* Update configuration for the clock setting */
|
|
if (!lp55xx_is_extclk_used(chip))
|
|
cfg |= LP5562_CLK_INT;
|
|
|
|
ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Initialize all channels PWM to zero -> leds off */
|
|
lp55xx_write(chip, LP5562_REG_R_PWM, 0);
|
|
lp55xx_write(chip, LP5562_REG_G_PWM, 0);
|
|
lp55xx_write(chip, LP5562_REG_B_PWM, 0);
|
|
lp55xx_write(chip, LP5562_REG_W_PWM, 0);
|
|
|
|
/* Set LED map as register PWM by default */
|
|
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp5562_led_brightness(struct lp55xx_led *led)
|
|
{
|
|
struct lp55xx_chip *chip = led->chip;
|
|
static const u8 addr[] = {
|
|
LP5562_REG_R_PWM,
|
|
LP5562_REG_G_PWM,
|
|
LP5562_REG_B_PWM,
|
|
LP5562_REG_W_PWM,
|
|
};
|
|
int ret;
|
|
|
|
mutex_lock(&chip->lock);
|
|
ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
|
|
mutex_unlock(&chip->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void lp5562_write_program_memory(struct lp55xx_chip *chip,
|
|
u8 base, const u8 *rgb, int size)
|
|
{
|
|
int i;
|
|
|
|
if (!rgb || size <= 0)
|
|
return;
|
|
|
|
for (i = 0; i < size; i++)
|
|
lp55xx_write(chip, base + i, *(rgb + i));
|
|
|
|
lp55xx_write(chip, base + i, 0);
|
|
lp55xx_write(chip, base + i + 1, 0);
|
|
}
|
|
|
|
/* check the size of program count */
|
|
static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
|
|
{
|
|
return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
|
|
ptn->size_g >= LP5562_PROGRAM_LENGTH ||
|
|
ptn->size_b >= LP5562_PROGRAM_LENGTH;
|
|
}
|
|
|
|
static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
|
|
{
|
|
struct lp55xx_predef_pattern *ptn;
|
|
int i;
|
|
|
|
if (mode == LP5562_PATTERN_OFF) {
|
|
lp5562_run_engine(chip, false);
|
|
return 0;
|
|
}
|
|
|
|
ptn = chip->pdata->patterns + (mode - 1);
|
|
if (!ptn || _is_pc_overflow(ptn)) {
|
|
dev_err(&chip->cl->dev, "invalid pattern data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lp5562_stop_engine(chip);
|
|
|
|
/* Set LED map as RGB */
|
|
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
|
|
|
|
/* Load engines */
|
|
for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
|
|
chip->engine_idx = i;
|
|
lp5562_load_engine(chip);
|
|
}
|
|
|
|
/* Clear program registers */
|
|
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
|
|
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
|
|
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
|
|
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
|
|
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
|
|
lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
|
|
|
|
/* Program engines */
|
|
lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
|
|
ptn->r, ptn->size_r);
|
|
lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
|
|
ptn->g, ptn->size_g);
|
|
lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
|
|
ptn->b, ptn->size_b);
|
|
|
|
/* Run engines */
|
|
lp5562_run_engine(chip, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t lp5562_store_pattern(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct lp55xx_chip *chip = led->chip;
|
|
struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
|
|
int num_patterns = chip->pdata->num_patterns;
|
|
unsigned long mode;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (mode > num_patterns || !ptn)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&chip->lock);
|
|
ret = lp5562_run_predef_led_pattern(chip, mode);
|
|
mutex_unlock(&chip->lock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t lp5562_store_engine_mux(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct lp55xx_chip *chip = led->chip;
|
|
u8 mask;
|
|
u8 val;
|
|
|
|
/* LED map
|
|
* R ... Engine 1 (fixed)
|
|
* G ... Engine 2 (fixed)
|
|
* B ... Engine 3 (fixed)
|
|
* W ... Engine 1 or 2 or 3
|
|
*/
|
|
|
|
if (sysfs_streq(buf, "RGB")) {
|
|
mask = LP5562_ENG_FOR_RGB_M;
|
|
val = LP5562_ENG_SEL_RGB;
|
|
} else if (sysfs_streq(buf, "W")) {
|
|
enum lp55xx_engine_index idx = chip->engine_idx;
|
|
|
|
mask = LP5562_ENG_FOR_W_M;
|
|
switch (idx) {
|
|
case LP55XX_ENGINE_1:
|
|
val = LP5562_ENG1_FOR_W;
|
|
break;
|
|
case LP55XX_ENGINE_2:
|
|
val = LP5562_ENG2_FOR_W;
|
|
break;
|
|
case LP55XX_ENGINE_3:
|
|
val = LP5562_ENG3_FOR_W;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
} else {
|
|
dev_err(dev, "choose RGB or W\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&chip->lock);
|
|
lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
|
|
mutex_unlock(&chip->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
|
|
static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
|
|
|
|
static struct attribute *lp5562_attributes[] = {
|
|
&dev_attr_led_pattern.attr,
|
|
&dev_attr_engine_mux.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group lp5562_group = {
|
|
.attrs = lp5562_attributes,
|
|
};
|
|
|
|
/* Chip specific configurations */
|
|
static struct lp55xx_device_config lp5562_cfg = {
|
|
.max_channel = LP5562_MAX_LEDS,
|
|
.reset = {
|
|
.addr = LP5562_REG_RESET,
|
|
.val = LP5562_RESET,
|
|
},
|
|
.enable = {
|
|
.addr = LP5562_REG_ENABLE,
|
|
.val = LP5562_ENABLE_DEFAULT,
|
|
},
|
|
.post_init_device = lp5562_post_init_device,
|
|
.set_led_current = lp5562_set_led_current,
|
|
.brightness_fn = lp5562_led_brightness,
|
|
.run_engine = lp5562_run_engine,
|
|
.firmware_cb = lp5562_firmware_loaded,
|
|
.dev_attr_group = &lp5562_group,
|
|
};
|
|
|
|
static int lp5562_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct lp55xx_chip *chip;
|
|
struct lp55xx_led *led;
|
|
struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct device_node *np = dev_of_node(&client->dev);
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->cfg = &lp5562_cfg;
|
|
|
|
if (!pdata) {
|
|
if (np) {
|
|
pdata = lp55xx_of_populate_pdata(&client->dev, np,
|
|
chip);
|
|
if (IS_ERR(pdata))
|
|
return PTR_ERR(pdata);
|
|
} else {
|
|
dev_err(&client->dev, "no platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
|
|
led = devm_kcalloc(&client->dev,
|
|
pdata->num_channels, sizeof(*led), GFP_KERNEL);
|
|
if (!led)
|
|
return -ENOMEM;
|
|
|
|
chip->cl = client;
|
|
chip->pdata = pdata;
|
|
|
|
mutex_init(&chip->lock);
|
|
|
|
i2c_set_clientdata(client, led);
|
|
|
|
ret = lp55xx_init_device(chip);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
ret = lp55xx_register_leds(led, chip);
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
ret = lp55xx_register_sysfs(chip);
|
|
if (ret) {
|
|
dev_err(&client->dev, "registering sysfs failed\n");
|
|
goto err_out;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
lp55xx_deinit_device(chip);
|
|
err_init:
|
|
return ret;
|
|
}
|
|
|
|
static int lp5562_remove(struct i2c_client *client)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(client);
|
|
struct lp55xx_chip *chip = led->chip;
|
|
|
|
lp5562_stop_engine(chip);
|
|
|
|
lp55xx_unregister_sysfs(chip);
|
|
lp55xx_deinit_device(chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lp5562_id[] = {
|
|
{ "lp5562", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lp5562_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id of_lp5562_leds_match[] = {
|
|
{ .compatible = "ti,lp5562", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
|
|
#endif
|
|
|
|
static struct i2c_driver lp5562_driver = {
|
|
.driver = {
|
|
.name = "lp5562",
|
|
.of_match_table = of_match_ptr(of_lp5562_leds_match),
|
|
},
|
|
.probe = lp5562_probe,
|
|
.remove = lp5562_remove,
|
|
.id_table = lp5562_id,
|
|
};
|
|
|
|
module_i2c_driver(lp5562_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
|
|
MODULE_AUTHOR("Milo Kim");
|
|
MODULE_LICENSE("GPL");
|