kernel_optimize_test/drivers/net/bnx2x_init.h
Eilon Greenstein 573f203574 bnx2x: Re-factor the initialization code
Moving the code to a more logical place and beautifying it. No real change in
behavior.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 23:02:59 -07:00

153 lines
3.4 KiB
C

/* bnx2x_init.h: Broadcom Everest network driver.
* Structures and macroes needed during the initialization.
*
* Copyright (c) 2007-2009 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Eliezer Tamir
* Modified by: Vladislav Zolotarov <vladz@broadcom.com>
*/
#ifndef BNX2X_INIT_H
#define BNX2X_INIT_H
/* RAM0 size in bytes */
#define STORM_INTMEM_SIZE_E1 0x5800
#define STORM_INTMEM_SIZE_E1H 0x10000
#define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1(bp) ? STORM_INTMEM_SIZE_E1 : \
STORM_INTMEM_SIZE_E1H) / 4)
/* Init operation types and structures */
/* Common for both E1 and E1H */
#define OP_RD 0x1 /* read single register */
#define OP_WR 0x2 /* write single register */
#define OP_IW 0x3 /* write single register using mailbox */
#define OP_SW 0x4 /* copy a string to the device */
#define OP_SI 0x5 /* copy a string using mailbox */
#define OP_ZR 0x6 /* clear memory */
#define OP_ZP 0x7 /* unzip then copy with DMAE */
#define OP_WR_64 0x8 /* write 64 bit pattern */
#define OP_WB 0x9 /* copy a string using DMAE */
/* FPGA and EMUL specific operations */
#define OP_WR_EMUL 0xa /* write single register on Emulation */
#define OP_WR_FPGA 0xb /* write single register on FPGA */
#define OP_WR_ASIC 0xc /* write single register on ASIC */
/* Init stages */
/* Never reorder stages !!! */
#define COMMON_STAGE 0
#define PORT0_STAGE 1
#define PORT1_STAGE 2
#define FUNC0_STAGE 3
#define FUNC1_STAGE 4
#define FUNC2_STAGE 5
#define FUNC3_STAGE 6
#define FUNC4_STAGE 7
#define FUNC5_STAGE 8
#define FUNC6_STAGE 9
#define FUNC7_STAGE 10
#define STAGE_IDX_MAX 11
#define STAGE_START 0
#define STAGE_END 1
/* Indices of blocks */
#define PRS_BLOCK 0
#define SRCH_BLOCK 1
#define TSDM_BLOCK 2
#define TCM_BLOCK 3
#define BRB1_BLOCK 4
#define TSEM_BLOCK 5
#define PXPCS_BLOCK 6
#define EMAC0_BLOCK 7
#define EMAC1_BLOCK 8
#define DBU_BLOCK 9
#define MISC_BLOCK 10
#define DBG_BLOCK 11
#define NIG_BLOCK 12
#define MCP_BLOCK 13
#define UPB_BLOCK 14
#define CSDM_BLOCK 15
#define USDM_BLOCK 16
#define CCM_BLOCK 17
#define UCM_BLOCK 18
#define USEM_BLOCK 19
#define CSEM_BLOCK 20
#define XPB_BLOCK 21
#define DQ_BLOCK 22
#define TIMERS_BLOCK 23
#define XSDM_BLOCK 24
#define QM_BLOCK 25
#define PBF_BLOCK 26
#define XCM_BLOCK 27
#define XSEM_BLOCK 28
#define CDU_BLOCK 29
#define DMAE_BLOCK 30
#define PXP_BLOCK 31
#define CFC_BLOCK 32
#define HC_BLOCK 33
#define PXP2_BLOCK 34
#define MISC_AEU_BLOCK 35
#define PGLUE_B_BLOCK 36
#define IGU_BLOCK 37
/* Returns the index of start or end of a specific block stage in ops array*/
#define BLOCK_OPS_IDX(block, stage, end) \
(2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
struct raw_op {
u32 op:8;
u32 offset:24;
u32 raw_data;
};
struct op_read {
u32 op:8;
u32 offset:24;
u32 pad;
};
struct op_write {
u32 op:8;
u32 offset:24;
u32 val;
};
struct op_string_write {
u32 op:8;
u32 offset:24;
#ifdef __LITTLE_ENDIAN
u16 data_off;
u16 data_len;
#else /* __BIG_ENDIAN */
u16 data_len;
u16 data_off;
#endif
};
struct op_zero {
u32 op:8;
u32 offset:24;
u32 len;
};
union init_op {
struct op_read read;
struct op_write write;
struct op_string_write str_wr;
struct op_zero zero;
struct raw_op raw;
};
#endif /* BNX2X_INIT_H */