kernel_optimize_test/block/compat_ioctl.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

412 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/blktrace_api.h>
#include <linux/cdrom.h>
#include <linux/compat.h>
#include <linux/elevator.h>
#include <linux/hdreg.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/types.h>
#include <linux/uaccess.h>
static int compat_put_ushort(unsigned long arg, unsigned short val)
{
return put_user(val, (unsigned short __user *)compat_ptr(arg));
}
static int compat_put_int(unsigned long arg, int val)
{
return put_user(val, (compat_int_t __user *)compat_ptr(arg));
}
static int compat_put_uint(unsigned long arg, unsigned int val)
{
return put_user(val, (compat_uint_t __user *)compat_ptr(arg));
}
static int compat_put_long(unsigned long arg, long val)
{
return put_user(val, (compat_long_t __user *)compat_ptr(arg));
}
static int compat_put_ulong(unsigned long arg, compat_ulong_t val)
{
return put_user(val, (compat_ulong_t __user *)compat_ptr(arg));
}
static int compat_put_u64(unsigned long arg, u64 val)
{
return put_user(val, (compat_u64 __user *)compat_ptr(arg));
}
struct compat_hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
u32 start;
};
static int compat_hdio_getgeo(struct gendisk *disk, struct block_device *bdev,
struct compat_hd_geometry __user *ugeo)
{
struct hd_geometry geo;
int ret;
if (!ugeo)
return -EINVAL;
if (!disk->fops->getgeo)
return -ENOTTY;
memset(&geo, 0, sizeof(geo));
/*
* We need to set the startsect first, the driver may
* want to override it.
*/
geo.start = get_start_sect(bdev);
ret = disk->fops->getgeo(bdev, &geo);
if (ret)
return ret;
ret = copy_to_user(ugeo, &geo, 4);
ret |= put_user(geo.start, &ugeo->start);
if (ret)
ret = -EFAULT;
return ret;
}
static int compat_hdio_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
unsigned long __user *p;
int error;
p = compat_alloc_user_space(sizeof(unsigned long));
error = __blkdev_driver_ioctl(bdev, mode,
cmd, (unsigned long)p);
if (error == 0) {
unsigned int __user *uvp = compat_ptr(arg);
unsigned long v;
if (get_user(v, p) || put_user(v, uvp))
error = -EFAULT;
}
return error;
}
struct compat_cdrom_read_audio {
union cdrom_addr addr;
u8 addr_format;
compat_int_t nframes;
compat_caddr_t buf;
};
struct compat_cdrom_generic_command {
unsigned char cmd[CDROM_PACKET_SIZE];
compat_caddr_t buffer;
compat_uint_t buflen;
compat_int_t stat;
compat_caddr_t sense;
unsigned char data_direction;
compat_int_t quiet;
compat_int_t timeout;
compat_caddr_t reserved[1];
};
static int compat_cdrom_read_audio(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct cdrom_read_audio __user *cdread_audio;
struct compat_cdrom_read_audio __user *cdread_audio32;
__u32 data;
void __user *datap;
cdread_audio = compat_alloc_user_space(sizeof(*cdread_audio));
cdread_audio32 = compat_ptr(arg);
if (copy_in_user(&cdread_audio->addr,
&cdread_audio32->addr,
(sizeof(*cdread_audio32) -
sizeof(compat_caddr_t))))
return -EFAULT;
if (get_user(data, &cdread_audio32->buf))
return -EFAULT;
datap = compat_ptr(data);
if (put_user(datap, &cdread_audio->buf))
return -EFAULT;
return __blkdev_driver_ioctl(bdev, mode, cmd,
(unsigned long)cdread_audio);
}
static int compat_cdrom_generic_command(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct cdrom_generic_command __user *cgc;
struct compat_cdrom_generic_command __user *cgc32;
u32 data;
unsigned char dir;
int itmp;
cgc = compat_alloc_user_space(sizeof(*cgc));
cgc32 = compat_ptr(arg);
if (copy_in_user(&cgc->cmd, &cgc32->cmd, sizeof(cgc->cmd)) ||
get_user(data, &cgc32->buffer) ||
put_user(compat_ptr(data), &cgc->buffer) ||
copy_in_user(&cgc->buflen, &cgc32->buflen,
(sizeof(unsigned int) + sizeof(int))) ||
get_user(data, &cgc32->sense) ||
put_user(compat_ptr(data), &cgc->sense) ||
get_user(dir, &cgc32->data_direction) ||
put_user(dir, &cgc->data_direction) ||
get_user(itmp, &cgc32->quiet) ||
put_user(itmp, &cgc->quiet) ||
get_user(itmp, &cgc32->timeout) ||
put_user(itmp, &cgc->timeout) ||
get_user(data, &cgc32->reserved[0]) ||
put_user(compat_ptr(data), &cgc->reserved[0]))
return -EFAULT;
return __blkdev_driver_ioctl(bdev, mode, cmd, (unsigned long)cgc);
}
struct compat_blkpg_ioctl_arg {
compat_int_t op;
compat_int_t flags;
compat_int_t datalen;
compat_caddr_t data;
};
static int compat_blkpg_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, struct compat_blkpg_ioctl_arg __user *ua32)
{
struct blkpg_ioctl_arg __user *a = compat_alloc_user_space(sizeof(*a));
compat_caddr_t udata;
compat_int_t n;
int err;
err = get_user(n, &ua32->op);
err |= put_user(n, &a->op);
err |= get_user(n, &ua32->flags);
err |= put_user(n, &a->flags);
err |= get_user(n, &ua32->datalen);
err |= put_user(n, &a->datalen);
err |= get_user(udata, &ua32->data);
err |= put_user(compat_ptr(udata), &a->data);
if (err)
return err;
return blkdev_ioctl(bdev, mode, cmd, (unsigned long)a);
}
#define BLKBSZGET_32 _IOR(0x12, 112, int)
#define BLKBSZSET_32 _IOW(0x12, 113, int)
#define BLKGETSIZE64_32 _IOR(0x12, 114, int)
static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
unsigned cmd, unsigned long arg)
{
switch (cmd) {
case HDIO_GET_UNMASKINTR:
case HDIO_GET_MULTCOUNT:
case HDIO_GET_KEEPSETTINGS:
case HDIO_GET_32BIT:
case HDIO_GET_NOWERR:
case HDIO_GET_DMA:
case HDIO_GET_NICE:
case HDIO_GET_WCACHE:
case HDIO_GET_ACOUSTIC:
case HDIO_GET_ADDRESS:
case HDIO_GET_BUSSTATE:
return compat_hdio_ioctl(bdev, mode, cmd, arg);
case CDROMREADAUDIO:
return compat_cdrom_read_audio(bdev, mode, cmd, arg);
case CDROM_SEND_PACKET:
return compat_cdrom_generic_command(bdev, mode, cmd, arg);
/*
* No handler required for the ones below, we just need to
* convert arg to a 64 bit pointer.
*/
case BLKSECTSET:
/*
* 0x03 -- HD/IDE ioctl's used by hdparm and friends.
* Some need translations, these do not.
*/
case HDIO_GET_IDENTITY:
case HDIO_DRIVE_TASK:
case HDIO_DRIVE_CMD:
/* 0x330 is reserved -- it used to be HDIO_GETGEO_BIG */
case 0x330:
/* CDROM stuff */
case CDROMPAUSE:
case CDROMRESUME:
case CDROMPLAYMSF:
case CDROMPLAYTRKIND:
case CDROMREADTOCHDR:
case CDROMREADTOCENTRY:
case CDROMSTOP:
case CDROMSTART:
case CDROMEJECT:
case CDROMVOLCTRL:
case CDROMSUBCHNL:
case CDROMMULTISESSION:
case CDROM_GET_MCN:
case CDROMRESET:
case CDROMVOLREAD:
case CDROMSEEK:
case CDROMPLAYBLK:
case CDROMCLOSETRAY:
case CDROM_DISC_STATUS:
case CDROM_CHANGER_NSLOTS:
case CDROM_GET_CAPABILITY:
/* Ignore cdrom.h about these next 5 ioctls, they absolutely do
* not take a struct cdrom_read, instead they take a struct cdrom_msf
* which is compatible.
*/
case CDROMREADMODE2:
case CDROMREADMODE1:
case CDROMREADRAW:
case CDROMREADCOOKED:
case CDROMREADALL:
/* DVD ioctls */
case DVD_READ_STRUCT:
case DVD_WRITE_STRUCT:
case DVD_AUTH:
arg = (unsigned long)compat_ptr(arg);
/* These intepret arg as an unsigned long, not as a pointer,
* so we must not do compat_ptr() conversion. */
case HDIO_SET_MULTCOUNT:
case HDIO_SET_UNMASKINTR:
case HDIO_SET_KEEPSETTINGS:
case HDIO_SET_32BIT:
case HDIO_SET_NOWERR:
case HDIO_SET_DMA:
case HDIO_SET_PIO_MODE:
case HDIO_SET_NICE:
case HDIO_SET_WCACHE:
case HDIO_SET_ACOUSTIC:
case HDIO_SET_BUSSTATE:
case HDIO_SET_ADDRESS:
case CDROMEJECT_SW:
case CDROM_SET_OPTIONS:
case CDROM_CLEAR_OPTIONS:
case CDROM_SELECT_SPEED:
case CDROM_SELECT_DISC:
case CDROM_MEDIA_CHANGED:
case CDROM_DRIVE_STATUS:
case CDROM_LOCKDOOR:
case CDROM_DEBUG:
break;
default:
/* unknown ioctl number */
return -ENOIOCTLCMD;
}
return __blkdev_driver_ioctl(bdev, mode, cmd, arg);
}
/* Most of the generic ioctls are handled in the normal fallback path.
This assumes the blkdev's low level compat_ioctl always returns
ENOIOCTLCMD for unknown ioctls. */
long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
int ret = -ENOIOCTLCMD;
struct inode *inode = file->f_mapping->host;
struct block_device *bdev = inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
fmode_t mode = file->f_mode;
loff_t size;
unsigned int max_sectors;
/*
* O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
* to updated it before every ioctl.
*/
if (file->f_flags & O_NDELAY)
mode |= FMODE_NDELAY;
else
mode &= ~FMODE_NDELAY;
switch (cmd) {
case HDIO_GETGEO:
return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
case BLKPBSZGET:
return compat_put_uint(arg, bdev_physical_block_size(bdev));
case BLKIOMIN:
return compat_put_uint(arg, bdev_io_min(bdev));
case BLKIOOPT:
return compat_put_uint(arg, bdev_io_opt(bdev));
case BLKALIGNOFF:
return compat_put_int(arg, bdev_alignment_offset(bdev));
case BLKDISCARDZEROES:
return compat_put_uint(arg, 0);
case BLKFLSBUF:
case BLKROSET:
case BLKDISCARD:
case BLKSECDISCARD:
case BLKZEROOUT:
/*
* the ones below are implemented in blkdev_locked_ioctl,
* but we call blkdev_ioctl, which gets the lock for us
*/
case BLKRRPART:
return blkdev_ioctl(bdev, mode, cmd,
(unsigned long)compat_ptr(arg));
case BLKBSZSET_32:
return blkdev_ioctl(bdev, mode, BLKBSZSET,
(unsigned long)compat_ptr(arg));
case BLKPG:
return compat_blkpg_ioctl(bdev, mode, cmd, compat_ptr(arg));
case BLKRAGET:
case BLKFRAGET:
if (!arg)
return -EINVAL;
return compat_put_long(arg,
(bdev->bd_bdi->ra_pages * PAGE_SIZE) / 512);
case BLKROGET: /* compatible */
return compat_put_int(arg, bdev_read_only(bdev) != 0);
case BLKBSZGET_32: /* get the logical block size (cf. BLKSSZGET) */
return compat_put_int(arg, block_size(bdev));
case BLKSSZGET: /* get block device hardware sector size */
return compat_put_int(arg, bdev_logical_block_size(bdev));
case BLKSECTGET:
max_sectors = min_t(unsigned int, USHRT_MAX,
queue_max_sectors(bdev_get_queue(bdev)));
return compat_put_ushort(arg, max_sectors);
case BLKROTATIONAL:
return compat_put_ushort(arg,
!blk_queue_nonrot(bdev_get_queue(bdev)));
case BLKRASET: /* compatible, but no compat_ptr (!) */
case BLKFRASET:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
bdev->bd_bdi->ra_pages = (arg * 512) / PAGE_SIZE;
return 0;
case BLKGETSIZE:
size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return compat_put_ulong(arg, size >> 9);
case BLKGETSIZE64_32:
return compat_put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESETUP32:
case BLKTRACESTART: /* compatible */
case BLKTRACESTOP: /* compatible */
case BLKTRACETEARDOWN: /* compatible */
ret = blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
return ret;
default:
if (disk->fops->compat_ioctl)
ret = disk->fops->compat_ioctl(bdev, mode, cmd, arg);
if (ret == -ENOIOCTLCMD)
ret = compat_blkdev_driver_ioctl(bdev, mode, cmd, arg);
return ret;
}
}