forked from luck/tmp_suning_uos_patched
f604931238
Additional cleanup for debug boards on H2/P2/H3/H4: move the init code that's not board-specific into a new file where it can be easily shared between all the different boards (avoiding code duplication, and making it easier to support more devices). Make H4 use that. This should be easy to drop in to the OMAP1 boards using these debug cards; the only difference seems to be that the p2 does an extra reset of the smc using the fpga (probably all boards could do that, if it's necessary) and doesn't use the gpio mux or request APIs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
187 lines
4.1 KiB
C
187 lines
4.1 KiB
C
/*
|
|
* linux/include/asm-arm/arch-omap/board.h
|
|
*
|
|
* Information structures for board-specific data
|
|
*
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
|
|
*/
|
|
|
|
#ifndef _OMAP_BOARD_H
|
|
#define _OMAP_BOARD_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <asm/arch/gpio-switch.h>
|
|
|
|
/* Different peripheral ids */
|
|
#define OMAP_TAG_CLOCK 0x4f01
|
|
#define OMAP_TAG_MMC 0x4f02
|
|
#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
|
|
#define OMAP_TAG_USB 0x4f04
|
|
#define OMAP_TAG_LCD 0x4f05
|
|
#define OMAP_TAG_GPIO_SWITCH 0x4f06
|
|
#define OMAP_TAG_UART 0x4f07
|
|
#define OMAP_TAG_FBMEM 0x4f08
|
|
#define OMAP_TAG_STI_CONSOLE 0x4f09
|
|
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
|
|
|
|
#define OMAP_TAG_BOOT_REASON 0x4f80
|
|
#define OMAP_TAG_FLASH_PART 0x4f81
|
|
#define OMAP_TAG_VERSION_STR 0x4f82
|
|
|
|
struct omap_clock_config {
|
|
/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
|
|
u8 system_clock_type;
|
|
};
|
|
|
|
struct omap_mmc_conf {
|
|
unsigned enabled:1;
|
|
/* nomux means "standard" muxing is wrong on this board, and that
|
|
* board-specific code handled it before common init logic.
|
|
*/
|
|
unsigned nomux:1;
|
|
/* switch pin can be for card detect (default) or card cover */
|
|
unsigned cover:1;
|
|
/* 4 wire signaling is optional, and is only used for SD/SDIO */
|
|
unsigned wire4:1;
|
|
s16 power_pin;
|
|
s16 switch_pin;
|
|
s16 wp_pin;
|
|
};
|
|
|
|
struct omap_mmc_config {
|
|
struct omap_mmc_conf mmc[2];
|
|
};
|
|
|
|
struct omap_serial_console_config {
|
|
u8 console_uart;
|
|
u32 console_speed;
|
|
};
|
|
|
|
struct omap_sti_console_config {
|
|
unsigned enable:1;
|
|
u8 channel;
|
|
};
|
|
|
|
struct omap_camera_sensor_config {
|
|
u16 reset_gpio;
|
|
int (*power_on)(void * data);
|
|
int (*power_off)(void * data);
|
|
};
|
|
|
|
struct omap_usb_config {
|
|
/* Configure drivers according to the connectors on your board:
|
|
* - "A" connector (rectagular)
|
|
* ... for host/OHCI use, set "register_host".
|
|
* - "B" connector (squarish) or "Mini-B"
|
|
* ... for device/gadget use, set "register_dev".
|
|
* - "Mini-AB" connector (very similar to Mini-B)
|
|
* ... for OTG use as device OR host, initialize "otg"
|
|
*/
|
|
unsigned register_host:1;
|
|
unsigned register_dev:1;
|
|
u8 otg; /* port number, 1-based: usb1 == 2 */
|
|
|
|
u8 hmc_mode;
|
|
|
|
/* implicitly true if otg: host supports remote wakeup? */
|
|
u8 rwc;
|
|
|
|
/* signaling pins used to talk to transceiver on usbN:
|
|
* 0 == usbN unused
|
|
* 2 == usb0-only, using internal transceiver
|
|
* 3 == 3 wire bidirectional
|
|
* 4 == 4 wire bidirectional
|
|
* 6 == 6 wire unidirectional (or TLL)
|
|
*/
|
|
u8 pins[3];
|
|
};
|
|
|
|
struct omap_lcd_config {
|
|
char panel_name[16];
|
|
char ctrl_name[16];
|
|
s16 nreset_gpio;
|
|
u8 data_lines;
|
|
};
|
|
|
|
struct device;
|
|
struct fb_info;
|
|
struct omap_backlight_config {
|
|
int default_intensity;
|
|
int (*set_power)(struct device *dev, int state);
|
|
int (*check_fb)(struct fb_info *fb);
|
|
};
|
|
|
|
struct omap_fbmem_config {
|
|
u32 start;
|
|
u32 size;
|
|
};
|
|
|
|
struct omap_pwm_led_platform_data {
|
|
const char *name;
|
|
int intensity_timer;
|
|
int blink_timer;
|
|
void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
|
|
};
|
|
|
|
/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
|
|
struct omap_gpio_switch_config {
|
|
char name[12];
|
|
u16 gpio;
|
|
int flags:4;
|
|
int type:4;
|
|
int key_code:24; /* Linux key code */
|
|
};
|
|
|
|
struct omap_uart_config {
|
|
/* Bit field of UARTs present; bit 0 --> UART1 */
|
|
unsigned int enabled_uarts;
|
|
};
|
|
|
|
|
|
struct omap_flash_part_config {
|
|
char part_table[0];
|
|
};
|
|
|
|
struct omap_boot_reason_config {
|
|
char reason_str[12];
|
|
};
|
|
|
|
struct omap_version_config {
|
|
char component[12];
|
|
char version[12];
|
|
};
|
|
|
|
|
|
#include <asm-arm/arch-omap/board-nokia.h>
|
|
|
|
struct omap_board_config_entry {
|
|
u16 tag;
|
|
u16 len;
|
|
u8 data[0];
|
|
};
|
|
|
|
struct omap_board_config_kernel {
|
|
u16 tag;
|
|
const void *data;
|
|
};
|
|
|
|
extern const void *__omap_get_config(u16 tag, size_t len, int nr);
|
|
|
|
#define omap_get_config(tag, type) \
|
|
((const type *) __omap_get_config((tag), sizeof(type), 0))
|
|
#define omap_get_nr_config(tag, type, nr) \
|
|
((const type *) __omap_get_config((tag), sizeof(type), (nr)))
|
|
|
|
extern const void *omap_get_var_config(u16 tag, size_t *len);
|
|
|
|
extern struct omap_board_config_kernel *omap_board_config;
|
|
extern int omap_board_config_size;
|
|
|
|
|
|
/* for TI reference platforms sharing the same debug card */
|
|
extern int debug_card_init(u32 addr, unsigned gpio);
|
|
|
|
#endif
|