.. |
include/mach
|
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
|
2009-09-10 18:49:31 +08:00 |
am200epd.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
am300epd.c
|
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
|
2009-02-10 11:28:00 +00:00 |
clock.c
|
[ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c
|
2009-06-04 17:45:43 +01:00 |
clock.h
|
[ARM] pxa: remove left-over struct clk *other field from struct clk
|
2009-09-10 18:49:23 +08:00 |
cm-x2xx-pci.c
|
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
|
2009-03-09 21:22:38 +08:00 |
cm-x2xx-pci.h
|
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
|
2008-10-07 12:05:05 +01:00 |
cm-x2xx.c
|
[ARM] pxa/cm-x2xx: fix ucb1400 not being registered
|
2009-04-04 10:26:34 +08:00 |
cm-x255.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
cm-x270.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
cm-x300.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
colibri-pxa3xx.c
|
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
|
2009-09-10 18:49:31 +08:00 |
colibri-pxa270.c
|
[ARM] pxa: rename colibri.c to colibri-pxa270.c
|
2009-03-23 09:57:54 +08:00 |
colibri-pxa300.c
|
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
|
2009-09-10 18:49:31 +08:00 |
colibri-pxa320.c
|
[ARM] pxa/colibri: add UART MFP configuration for the PXA320 module
|
2009-09-10 18:49:31 +08:00 |
corgi_lcd.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
corgi_pm.c
|
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
|
2009-06-11 22:20:42 +08:00 |
corgi_ssp.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
corgi.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
cpufreq-pxa2xx.c
|
[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx
|
2009-06-05 10:33:07 +08:00 |
cpufreq-pxa3xx.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
csb701.c
|
[ARM] pxa/csb701: do not register devices on non-csb726 boads
|
2009-04-04 10:26:35 +08:00 |
csb726.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
devices.c
|
[ARM] pxa: add device definition for graphics controller
|
2009-09-10 18:49:27 +08:00 |
devices.h
|
[ARM] pxa: add device definition for graphics controller
|
2009-09-10 18:49:27 +08:00 |
e330.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
e350.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
e400.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
e740.c
|
[ARM] pxa: register AC97 controller devices
|
2009-04-04 21:54:40 +08:00 |
e750.c
|
[ARM] pxa: register AC97 controller devices
|
2009-04-04 21:54:40 +08:00 |
e800.c
|
[ARM] pxa: register AC97 controller devices
|
2009-04-04 21:54:40 +08:00 |
em-x270.c
|
[ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-device
|
2009-09-10 18:49:33 +08:00 |
eseries.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
eseries.h
|
[ARM] pxa: Add multi-io support for e-series
|
2008-12-15 03:29:34 +00:00 |
ezx.c
|
[ARM] pxa/ezx: setup gpio-keys for EzX phones
|
2009-06-05 10:50:22 +08:00 |
generic.c
|
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
|
2009-03-09 21:22:37 +08:00 |
generic.h
|
[ARM] pxa: add missing declaration of pxa26x_init_irq()
|
2009-04-13 12:10:36 +08:00 |
gumstix.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
h5000.c
|
Merge branch 'origin' into devel
|
2009-03-28 20:29:51 +00:00 |
himalaya.c
|
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
|
2009-03-09 21:22:38 +08:00 |
hx4700.c
|
[ARM] pxa/hx4700: add Maxim 1587A voltage regulator
|
2009-06-16 21:03:35 +08:00 |
idp.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
imote2.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
irq.c
|
[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling
|
2009-09-10 18:49:26 +08:00 |
Kconfig
|
[ARM] pxa/ezx: set IRQ_BOARD_END for EZX
|
2009-09-10 18:49:30 +08:00 |
leds-idp.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
leds-lubbock.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
leds-mainstone.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
leds.c
|
[ARM] 5251/1: remove old LED support for Trizeps4 SOM
|
2008-10-01 22:34:34 +01:00 |
leds.h
|
|
|
littleton.c
|
[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmc
|
2009-09-10 18:49:30 +08:00 |
lpd270.c
|
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
|
2009-03-09 21:22:37 +08:00 |
lubbock.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
magician.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
mainstone.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
Makefile
|
[ARM] pxa/treo680: initial support
|
2009-06-16 21:03:34 +08:00 |
Makefile.boot
|
|
|
mfp-pxa2xx.c
|
[ARM] pxa: enable GPIO receivers after configuring pins
|
2009-05-18 21:52:09 +08:00 |
mfp-pxa3xx.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
mioa701_bootresume.S
|
[ARM] pxa/MioA701: fix memory corruption.
|
2008-11-22 20:57:21 +08:00 |
mioa701.c
|
[ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera interface
|
2009-09-10 18:49:32 +08:00 |
mp900.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
palmld.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
palmt5.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
palmte2.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
palmtx.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
palmz72.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
pcm027.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
pcm990-baseboard.c
|
[ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device
|
2009-09-10 18:49:31 +08:00 |
pm.c
|
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
|
2009-06-11 23:25:09 +08:00 |
poodle.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
pxa2xx.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
pxa3xx.c
|
[ARM] pxa: correct I2CPWR clock for pxa3xx
|
2009-07-03 14:13:49 +08:00 |
pxa25x.c
|
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
|
2009-03-09 21:22:37 +08:00 |
pxa27x.c
|
[ARM] pxa: add ability to set suspend mode
|
2009-06-05 10:32:48 +08:00 |
pxa300.c
|
[ARM] pxa: add clock definition for graphics controller
|
2009-09-10 18:49:26 +08:00 |
pxa320.c
|
[ARM] pxa: add clock definition for graphics controller
|
2009-09-10 18:49:26 +08:00 |
pxa930.c
|
[ARM] pxa: support mfp of pxa935
|
2009-09-10 18:49:24 +08:00 |
reset.c
|
[ARM] pxa: allow gpio_reset drive high during normal work
|
2009-05-18 21:52:09 +08:00 |
saar.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
sharpsl_pm.c
|
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
|
2009-06-11 23:25:09 +08:00 |
sharpsl.h
|
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
|
2009-06-11 22:20:42 +08:00 |
sleep.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
smemc.c
|
[ARM] pxa: avoid polluting the kernel's namespace
|
2008-11-28 16:04:54 +00:00 |
spitz_pm.c
|
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
|
2009-06-11 22:20:42 +08:00 |
spitz.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
ssp.c
|
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
|
2009-03-09 21:22:38 +08:00 |
standby.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
stargate2.c
|
[ARM] pxa: Stargate 2 board support
|
2009-06-05 10:46:17 +08:00 |
tavorevb.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
time.c
|
clocksource: pass clocksource to read() callback
|
2009-04-21 13:41:47 -07:00 |
tosa-bt.c
|
rfkill: rewrite
|
2009-06-03 14:06:13 -04:00 |
tosa.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
treo680.c
|
ARM: 5623/1: Treo680: ir shutdown typo fix
|
2009-07-27 14:23:57 +01:00 |
trizeps4.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |
viper.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
zylonite_pxa300.c
|
[ARM] pxa: fix gpio issue in zylonite
|
2009-07-18 10:00:08 +08:00 |
zylonite_pxa320.c
|
[ARM] pxa: fix gpio issue in zylonite
|
2009-07-18 10:00:08 +08:00 |
zylonite.c
|
[ARM] pxa: factor pxamci gpio handling
|
2009-09-10 18:49:30 +08:00 |