Johannes Berg 49a59543eb mac80211: dont assign seqno to or aggregate QoS Null frames ... 802.11 says: "Sequence numbers for QoS (+)Null frames may be set to any value." However, if we use the normal counters then peers will get confused with aggregation since there'll be holes in the sequence number sequence. To avoid that, neither assign a sequence number to QoS null frames nor put them on aggregation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2011-09-30 15:57:25 -04:00
..
aes_ccm.c
aes_ccm.h
aes_cmac.c
aes_cmac.h
agg-rx.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
agg-tx.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
cfg.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
cfg.h
chan.c
debugfs_key.c
debugfs_key.h
debugfs_netdev.c	mac80211: add ieee80211_vif param to tsf functions	2011-09-27 14:27:48 -04:00
debugfs_netdev.h
debugfs_sta.c	mac80211: add missing station flags to debugfs	2011-09-30 15:57:20 -04:00
debugfs_sta.h
debugfs.c	mac80211: add ieee80211_vif param to tsf functions	2011-09-27 14:27:48 -04:00
debugfs.h
driver-ops.h	mac80211: explicitly notify drivers of frame release	2011-09-30 15:57:21 -04:00
driver-trace.c
driver-trace.h	mac80211: allow out-of-band EOSP notification	2011-09-30 15:57:23 -04:00
event.c
ht.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
ibss.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
ieee80211_i.h	mac80211: allow out-of-band EOSP notification	2011-09-30 15:57:23 -04:00
iface.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
Kconfig	mac80211: handle TDLS high-level commands and frames	2011-09-30 15:57:07 -04:00
key.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
key.h	mac80211: allow driver to disconnect after resume	2011-07-13 14:49:43 -04:00
led.c
led.h
main.c	mac80211: allow out-of-band EOSP notification	2011-09-30 15:57:23 -04:00
Makefile
mesh_hwmp.c	mac80211: Mesh data frames must have the QoS header	2011-09-14 13:56:50 -04:00
mesh_pathtbl.c	mac80211: Mesh data frames must have the QoS header	2011-09-14 13:56:50 -04:00
mesh_plink.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
mesh.c	mac80211: standardize adding supported rates IEs	2011-09-30 15:57:06 -04:00
mesh.h	mac80211: standardize adding supported rates IEs	2011-09-30 15:57:06 -04:00
michael.c
michael.h
mlme.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
offchannel.c
pm.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
rate.c	mac80211: Send the management frame at requested rate	2011-09-27 14:34:10 -04:00
rate.h
rc80211_minstrel_debugfs.c
rc80211_minstrel_ht_debugfs.c
rc80211_minstrel_ht.c	mac80211: max_tp_rate2 management of minstrel_ht	2011-09-30 15:16:25 -04:00
rc80211_minstrel_ht.h
rc80211_minstrel.c
rc80211_minstrel.h
rc80211_pid_algo.c
rc80211_pid_debugfs.c
rc80211_pid.h
rx.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
scan.c	mac80211: Send the management frame at requested rate	2011-09-27 14:34:10 -04:00
spectmgmt.c	mac80211: Remove unnecessary OOM logging messages	2011-09-13 15:45:02 -04:00
sta_info.c	mac80211: allow out-of-band EOSP notification	2011-09-30 15:57:23 -04:00
sta_info.h	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
status.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
tkip.c	mac80211: allow driver access to TKIP RX P1K	2011-07-15 13:38:32 -04:00
tkip.h
tx.c	mac80211: dont assign seqno to or aggregate QoS Null frames	2011-09-30 15:57:25 -04:00
util.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
wep.c
wep.h
wme.c	mac80211: optimise station flags	2011-09-30 15:57:19 -04:00
wme.h	mac80211: Mesh data frames must have the QoS header	2011-09-14 13:56:50 -04:00
work.c	mac80211: Send the management frame at requested rate	2011-09-27 14:34:10 -04:00
wpa.c
wpa.h