forked from luck/tmp_suning_uos_patched
4af4016c53
This patch allows the UART clocks to be disabled when the OMAP UARTs are inactive, thus permitting the chip to hit retention in idle. After the expiration of an activity timer, each UART is allowed to disable its clocks so the system can enter retention. The activity timer is (re)activated on any UART interrupt, UART wake event or any IO pad wakeup. The actual disable of the UART clocks is done in the 'prepare_idle' hook called from the OMAP idle loop. While the activity timer is active, the smart-idle mode of the UART is also disabled. This is due to a "feature" of the UART module that after a UART wakeup, the smart-idle mode may be entered before the UART has communicated the interrupt, or upon TX, an idle mode may be entered before the TX FIFOs are emptied. Upon suspend, the 'prepare_suspend' hook cancels any pending activity timers and allows the clocks to be disabled immediately. In addition, upon disabling clocks the UART state is saved in case of an off-mode transition while clocks are off. Special thanks to Tero Kristo for the initial ideas and first versions of UART idle support, and to Jouni Hogander for extra testing and bugfixes. Tested on OMAP3 (Beagle, RX51, SDP, EVM) and OMAP2 (n810) Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> |
||
|---|---|---|
| .. | ||
| include/mach | ||
| clock.c | ||
| common.c | ||
| cpu-omap.c | ||
| debug-devices.c | ||
| debug-leds.c | ||
| devices.c | ||
| dma.c | ||
| dmtimer.c | ||
| fb.c | ||
| gpio.c | ||
| i2c.c | ||
| io.c | ||
| Kconfig | ||
| mailbox.c | ||
| Makefile | ||
| mcbsp.c | ||
| mux.c | ||
| ocpi.c | ||
| sram.c | ||
| usb.c | ||