forked from luck/tmp_suning_uos_patched
74ba9207e1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
129 lines
4.0 KiB
C
129 lines
4.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags
|
|
|
|
Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
|
|
|
|
*/
|
|
|
|
#ifndef _SAA7115_H_
|
|
#define _SAA7115_H_
|
|
|
|
/* s_routing inputs, outputs, and config */
|
|
|
|
/* SAA7111/3/4/5 HW inputs */
|
|
#define SAA7115_COMPOSITE0 0
|
|
#define SAA7115_COMPOSITE1 1
|
|
#define SAA7115_COMPOSITE2 2
|
|
#define SAA7115_COMPOSITE3 3
|
|
#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */
|
|
#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */
|
|
#define SAA7115_SVIDEO0 6
|
|
#define SAA7115_SVIDEO1 7
|
|
#define SAA7115_SVIDEO2 8
|
|
#define SAA7115_SVIDEO3 9
|
|
|
|
/* outputs */
|
|
#define SAA7115_IPORT_ON 1
|
|
#define SAA7115_IPORT_OFF 0
|
|
|
|
/* SAA7111 specific outputs. */
|
|
#define SAA7111_VBI_BYPASS 2
|
|
#define SAA7111_FMT_YUV422 0x00
|
|
#define SAA7111_FMT_RGB 0x40
|
|
#define SAA7111_FMT_CCIR 0x80
|
|
#define SAA7111_FMT_YUV411 0xc0
|
|
|
|
/* config flags */
|
|
/*
|
|
* Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
|
|
* controls the IDQ signal polarity which is set to 'inverted' if the bit
|
|
* it 1 and to 'default' if it is 0.
|
|
*/
|
|
#define SAA7115_IDQ_IS_DEFAULT (1 << 0)
|
|
|
|
/* s_crystal_freq values and flags */
|
|
|
|
/* SAA7115 v4l2_crystal_freq frequency values */
|
|
#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */
|
|
#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */
|
|
|
|
/* SAA7115 v4l2_crystal_freq audio clock control flags */
|
|
#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */
|
|
#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */
|
|
#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */
|
|
#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */
|
|
|
|
/* ===== SAA7113 Config enums ===== */
|
|
|
|
/* Register 0x08 "Horizontal time constant" [Bit 3..4]:
|
|
* Should be set to "Fast Locking Mode" according to the datasheet,
|
|
* and that is the default setting in the gm7113c_init table.
|
|
* saa7113_init sets this value to "VTR Mode". */
|
|
enum saa7113_r08_htc {
|
|
SAA7113_HTC_TV_MODE = 0x00,
|
|
SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */
|
|
SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */
|
|
};
|
|
|
|
/* Register 0x10 "Output format selection" [Bit 6..7]:
|
|
* Defaults to ITU_656 as specified in datasheet. */
|
|
enum saa7113_r10_ofts {
|
|
SAA7113_OFTS_ITU_656 = 0x0, /* Default */
|
|
SAA7113_OFTS_VFLAG_BY_VREF,
|
|
SAA7113_OFTS_VFLAG_BY_DATA_TYPE
|
|
};
|
|
|
|
/*
|
|
* Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]:
|
|
* This is used to select what data is output on the RTS0 and RTS1 pins.
|
|
* RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0)
|
|
* RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified
|
|
* in the datasheet, but is set to HREF_HS in the saa7113_init table.
|
|
*/
|
|
enum saa7113_r12_rts {
|
|
SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */
|
|
SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */
|
|
SAA7113_RTS_GPSW,
|
|
SAA7115_RTS_HL,
|
|
SAA7113_RTS_VL,
|
|
SAA7113_RTS_DL,
|
|
SAA7113_RTS_PLIN,
|
|
SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */
|
|
SAA7113_RTS_HS,
|
|
SAA7113_RTS_HQ,
|
|
SAA7113_RTS_ODD,
|
|
SAA7113_RTS_VS,
|
|
SAA7113_RTS_V123,
|
|
SAA7113_RTS_VGATE,
|
|
SAA7113_RTS_VREF,
|
|
SAA7113_RTS_FID
|
|
};
|
|
|
|
/**
|
|
* struct saa7115_platform_data - Allow overriding default initialization
|
|
*
|
|
* @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table
|
|
* instead of saa7113_init table
|
|
* (saa7113 only)
|
|
* @saa7113_r08_htc: [R_08 - Bit 3..4]
|
|
* @saa7113_r10_vrln: [R_10 - Bit 3]
|
|
* default: Disabled for gm7113c_init
|
|
* Enabled for saa7113c_init
|
|
* @saa7113_r10_ofts: [R_10 - Bit 6..7]
|
|
* @saa7113_r12_rts0: [R_12 - Bit 0..3]
|
|
* @saa7113_r12_rts1: [R_12 - Bit 4..7]
|
|
* @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled
|
|
*/
|
|
struct saa7115_platform_data {
|
|
bool saa7113_force_gm7113c_init;
|
|
enum saa7113_r08_htc *saa7113_r08_htc;
|
|
bool *saa7113_r10_vrln;
|
|
enum saa7113_r10_ofts *saa7113_r10_ofts;
|
|
enum saa7113_r12_rts *saa7113_r12_rts0;
|
|
enum saa7113_r12_rts *saa7113_r12_rts1;
|
|
bool *saa7113_r13_adlsb;
|
|
};
|
|
|
|
#endif
|