AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
4cd55ab1f9
kernel_optimize_test/drivers/ide
History
Anton Vorontsov 6d1cee4436 alim15x3: disable init_hwif_ali15x3 for PowerPC 
We don't need init_hwif_ali15x3() on the PowerPC systems either.

Before:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0: Disabled unable to get IRQ 14.
ide0: failed to initialize IDE interface
ide1: Disabled unable to get IRQ 15.
ide1: failed to initialize IDE interface

After:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0 at 0x1100-0x1107,0x110a on irq 19
ide1 at 0x1110-0x1117,0x111a on irq 19
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache

ide0 works well, though I can't test ide1, it isn't traced out on
the board.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-29 22:57:38 +02:00
..
arm
h8300
legacy
mips
pci alim15x3: disable init_hwif_ali15x3 for PowerPC 2008-04-29 22:57:38 +02:00
ppc
ide-acpi.c
ide-cd_ioctl.c
ide-cd_verbose.c block: replace sizeof(rq->cmd) with BLK_MAX_CDB 2008-04-29 14:48:55 +02:00
ide-cd.c block: replace sizeof(rq->cmd) with BLK_MAX_CDB 2008-04-29 14:48:55 +02:00
ide-cd.h
ide-disk.c
ide-dma.c
ide-floppy.c
ide-generic.c
ide-io.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
ide-iops.c
ide-lib.c
ide-pnp.c
ide-probe.c
ide-proc.c drivers: use non-racy method for proc entries creation (2) 2008-04-29 08:06:22 -07:00
ide-scan-pci.c
ide-tape.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
ide-taskfile.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
ide-timing.h
ide.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
Kconfig
Makefile
setup-pci.c