forked from luck/tmp_suning_uos_patched
87d26d2d11
There is a possibility of a loop happening in the PLL output clock chain on the S3C64XX series. clk_mpll's parent was set to be clk_mout_mpll, but this is fed from clk_fout_epll (which is also clk_mpll). clk_mpll is meant to be the output from the MPLL, and clk_mout_mpll is a seperate clock derived from the mux of clk_mpll and clk_fin_mpll and thus should be considered a seperate clock. Anything using clk_mpll directly really should not be relying on this being the clock that is eventually routed to a peripheral, so remove the loop and ensure that the clocks accurately represent the clock chain in the device. The clk_mpll is not being used outside of the s3c6400-clock.c code, so this change should not break anything else. Do the same for the EPLL. Signed-off-by: Ben Dooks <ben-linux@fluff.org> |
||
---|---|---|
.. | ||
include/plat | ||
clock.c | ||
cpu.c | ||
cpufreq.c | ||
dev-audio.c | ||
dev-uart.c | ||
dma.c | ||
gpiolib.c | ||
irq-eint.c | ||
irq-pm.c | ||
irq.c | ||
Kconfig | ||
Makefile | ||
pm.c | ||
s3c6400-clock.c | ||
s3c6400-init.c | ||
setup-fb-24bpp.c | ||
setup-i2c0.c | ||
setup-i2c1.c | ||
setup-sdhci-gpio.c | ||
sleep.S |