forked from luck/tmp_suning_uos_patched
583ceada07
When a suspended OHCI controller sees a port's status change, it sets both the Root-Hub-Status-Change and the Resume-Detect bits in the Interrupt Status register. Processing both these bits, the driver tries to resume the root hub twice! This patch (as807) fixes the bug by ignoring RD if RHSC is set. It also prints a slightly more informative log message when a remote-wakeup event occurs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
712 lines
18 KiB
C
712 lines
18 KiB
C
/*
|
|
* OHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
|
|
*
|
|
* This file is licenced under GPL
|
|
*/
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* OHCI Root Hub ... the nonsharable stuff
|
|
*/
|
|
|
|
#define dbg_port(hc,label,num,value) \
|
|
ohci_dbg (hc, \
|
|
"%s roothub.portstatus [%d] " \
|
|
"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
|
|
label, num, temp, \
|
|
(temp & RH_PS_PRSC) ? " PRSC" : "", \
|
|
(temp & RH_PS_OCIC) ? " OCIC" : "", \
|
|
(temp & RH_PS_PSSC) ? " PSSC" : "", \
|
|
(temp & RH_PS_PESC) ? " PESC" : "", \
|
|
(temp & RH_PS_CSC) ? " CSC" : "", \
|
|
\
|
|
(temp & RH_PS_LSDA) ? " LSDA" : "", \
|
|
(temp & RH_PS_PPS) ? " PPS" : "", \
|
|
(temp & RH_PS_PRS) ? " PRS" : "", \
|
|
(temp & RH_PS_POCI) ? " POCI" : "", \
|
|
(temp & RH_PS_PSS) ? " PSS" : "", \
|
|
\
|
|
(temp & RH_PS_PES) ? " PES" : "", \
|
|
(temp & RH_PS_CCS) ? " CCS" : "" \
|
|
);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* hcd->hub_irq_enable() */
|
|
static void ohci_rhsc_enable (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
|
|
}
|
|
|
|
#define OHCI_SCHED_ENABLES \
|
|
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
|
|
|
|
static void dl_done_list (struct ohci_hcd *);
|
|
static void finish_unlinks (struct ohci_hcd *, u16);
|
|
|
|
static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
|
|
__releases(ohci->lock)
|
|
__acquires(ohci->lock)
|
|
{
|
|
int status = 0;
|
|
|
|
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
|
|
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
|
|
case OHCI_USB_RESUME:
|
|
ohci_dbg (ohci, "resume/suspend?\n");
|
|
ohci->hc_control &= ~OHCI_CTRL_HCFS;
|
|
ohci->hc_control |= OHCI_USB_RESET;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
/* FALL THROUGH */
|
|
case OHCI_USB_RESET:
|
|
status = -EBUSY;
|
|
ohci_dbg (ohci, "needs reinit!\n");
|
|
goto done;
|
|
case OHCI_USB_SUSPEND:
|
|
if (!ohci->autostop) {
|
|
ohci_dbg (ohci, "already suspended\n");
|
|
goto done;
|
|
}
|
|
}
|
|
ohci_dbg (ohci, "%s root hub\n",
|
|
autostop ? "auto-stop" : "suspend");
|
|
|
|
/* First stop any processing */
|
|
if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
|
|
ohci->hc_control &= ~OHCI_SCHED_ENABLES;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
|
|
ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
|
|
|
|
/* sched disables take effect on the next frame,
|
|
* then the last WDH could take 6+ msec
|
|
*/
|
|
ohci_dbg (ohci, "stopping schedules ...\n");
|
|
ohci->autostop = 0;
|
|
spin_unlock_irq (&ohci->lock);
|
|
msleep (8);
|
|
spin_lock_irq (&ohci->lock);
|
|
}
|
|
dl_done_list (ohci);
|
|
finish_unlinks (ohci, ohci_frame_no(ohci));
|
|
|
|
/* maybe resume can wake root hub */
|
|
if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev) ||
|
|
autostop)
|
|
ohci->hc_control |= OHCI_CTRL_RWE;
|
|
else {
|
|
ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
|
|
ohci->hc_control &= ~OHCI_CTRL_RWE;
|
|
}
|
|
|
|
/* Suspend hub ... this is the "global (to this bus) suspend" mode,
|
|
* which doesn't imply ports will first be individually suspended.
|
|
*/
|
|
ohci->hc_control &= ~OHCI_CTRL_HCFS;
|
|
ohci->hc_control |= OHCI_USB_SUSPEND;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
|
|
/* no resumes until devices finish suspending */
|
|
if (!autostop) {
|
|
ohci->next_statechange = jiffies + msecs_to_jiffies (5);
|
|
ohci->autostop = 0;
|
|
}
|
|
|
|
done:
|
|
return status;
|
|
}
|
|
|
|
static inline struct ed *find_head (struct ed *ed)
|
|
{
|
|
/* for bulk and control lists */
|
|
while (ed->ed_prev)
|
|
ed = ed->ed_prev;
|
|
return ed;
|
|
}
|
|
|
|
static int ohci_restart (struct ohci_hcd *ohci);
|
|
|
|
/* caller has locked the root hub */
|
|
static int ohci_rh_resume (struct ohci_hcd *ohci)
|
|
__releases(ohci->lock)
|
|
__acquires(ohci->lock)
|
|
{
|
|
struct usb_hcd *hcd = ohci_to_hcd (ohci);
|
|
u32 temp, enables;
|
|
int status = -EINPROGRESS;
|
|
int autostopped = ohci->autostop;
|
|
|
|
ohci->autostop = 0;
|
|
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
|
|
|
|
if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
|
|
/* this can happen after resuming a swsusp snapshot */
|
|
if (hcd->state == HC_STATE_RESUMING) {
|
|
ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
|
|
ohci->hc_control);
|
|
status = -EBUSY;
|
|
/* this happens when pmcore resumes HC then root */
|
|
} else {
|
|
ohci_dbg (ohci, "duplicate resume\n");
|
|
status = 0;
|
|
}
|
|
} else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
|
|
case OHCI_USB_SUSPEND:
|
|
ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
|
|
ohci->hc_control |= OHCI_USB_RESUME;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
ohci_dbg (ohci, "%s root hub\n",
|
|
autostopped ? "auto-start" : "resume");
|
|
break;
|
|
case OHCI_USB_RESUME:
|
|
/* HCFS changes sometime after INTR_RD */
|
|
ohci_info(ohci, "%swakeup\n",
|
|
autostopped ? "auto-" : "");
|
|
break;
|
|
case OHCI_USB_OPER:
|
|
/* this can happen after resuming a swsusp snapshot */
|
|
ohci_dbg (ohci, "snapshot resume? reinit\n");
|
|
status = -EBUSY;
|
|
break;
|
|
default: /* RESET, we lost power */
|
|
ohci_dbg (ohci, "lost power\n");
|
|
status = -EBUSY;
|
|
}
|
|
#ifdef CONFIG_PM
|
|
if (status == -EBUSY) {
|
|
if (!autostopped) {
|
|
spin_unlock_irq (&ohci->lock);
|
|
(void) ohci_init (ohci);
|
|
status = ohci_restart (ohci);
|
|
spin_lock_irq (&ohci->lock);
|
|
}
|
|
return status;
|
|
}
|
|
#endif
|
|
if (status != -EINPROGRESS)
|
|
return status;
|
|
if (autostopped)
|
|
goto skip_resume;
|
|
spin_unlock_irq (&ohci->lock);
|
|
|
|
temp = ohci->num_ports;
|
|
while (temp--) {
|
|
u32 stat = ohci_readl (ohci,
|
|
&ohci->regs->roothub.portstatus [temp]);
|
|
|
|
/* force global, not selective, resume */
|
|
if (!(stat & RH_PS_PSS))
|
|
continue;
|
|
ohci_writel (ohci, RH_PS_POCI,
|
|
&ohci->regs->roothub.portstatus [temp]);
|
|
}
|
|
|
|
/* Some controllers (lucent erratum) need extra-long delays */
|
|
msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
|
|
|
|
temp = ohci_readl (ohci, &ohci->regs->control);
|
|
temp &= OHCI_CTRL_HCFS;
|
|
if (temp != OHCI_USB_RESUME) {
|
|
ohci_err (ohci, "controller won't resume\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* disable old schedule state, reinit from scratch */
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
|
|
ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
|
|
|
|
/* Sometimes PCI D3 suspend trashes frame timings ... */
|
|
periodic_reinit (ohci);
|
|
|
|
/* the following code is executed with ohci->lock held and
|
|
* irqs disabled if and only if autostopped is true
|
|
*/
|
|
|
|
skip_resume:
|
|
/* interrupts might have been disabled */
|
|
ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
|
|
if (ohci->ed_rm_list)
|
|
ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
|
|
|
|
/* Then re-enable operations */
|
|
ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
if (!autostopped)
|
|
msleep (3);
|
|
|
|
temp = ohci->hc_control;
|
|
temp &= OHCI_CTRL_RWC;
|
|
temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
|
|
ohci->hc_control = temp;
|
|
ohci_writel (ohci, temp, &ohci->regs->control);
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
|
|
/* TRSMRCY */
|
|
if (!autostopped) {
|
|
msleep (10);
|
|
spin_lock_irq (&ohci->lock);
|
|
}
|
|
/* now ohci->lock is always held and irqs are always disabled */
|
|
|
|
/* keep it alive for more than ~5x suspend + resume costs */
|
|
ohci->next_statechange = jiffies + STATECHANGE_DELAY;
|
|
|
|
/* maybe turn schedules back on */
|
|
enables = 0;
|
|
temp = 0;
|
|
if (!ohci->ed_rm_list) {
|
|
if (ohci->ed_controltail) {
|
|
ohci_writel (ohci,
|
|
find_head (ohci->ed_controltail)->dma,
|
|
&ohci->regs->ed_controlhead);
|
|
enables |= OHCI_CTRL_CLE;
|
|
temp |= OHCI_CLF;
|
|
}
|
|
if (ohci->ed_bulktail) {
|
|
ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
|
|
&ohci->regs->ed_bulkhead);
|
|
enables |= OHCI_CTRL_BLE;
|
|
temp |= OHCI_BLF;
|
|
}
|
|
}
|
|
if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
|
|
enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
|
|
if (enables) {
|
|
ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
|
|
ohci->hc_control |= enables;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
if (temp)
|
|
ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int ohci_bus_suspend (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int rc;
|
|
|
|
spin_lock_irq (&ohci->lock);
|
|
|
|
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
|
|
rc = -ESHUTDOWN;
|
|
else
|
|
rc = ohci_rh_suspend (ohci, 0);
|
|
spin_unlock_irq (&ohci->lock);
|
|
return rc;
|
|
}
|
|
|
|
static int ohci_bus_resume (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int rc;
|
|
|
|
if (time_before (jiffies, ohci->next_statechange))
|
|
msleep(5);
|
|
|
|
spin_lock_irq (&ohci->lock);
|
|
|
|
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
|
|
rc = -ESHUTDOWN;
|
|
else
|
|
rc = ohci_rh_resume (ohci);
|
|
spin_unlock_irq (&ohci->lock);
|
|
|
|
/* poll until we know a device is connected or we autostop */
|
|
if (rc == 0)
|
|
usb_hcd_poll_rh_status(hcd);
|
|
return rc;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* build "status change" packet (one or two bytes) from HC registers */
|
|
|
|
static int
|
|
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int i, changed = 0, length = 1;
|
|
int any_connected = 0, rhsc_enabled = 1;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave (&ohci->lock, flags);
|
|
|
|
/* undocumented erratum seen on at least rev D */
|
|
if ((ohci->flags & OHCI_QUIRK_AMD756)
|
|
&& (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
|
|
ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
|
|
ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
|
|
/* retry later; "should not happen" */
|
|
goto done;
|
|
}
|
|
|
|
/* init status */
|
|
if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC))
|
|
buf [0] = changed = 1;
|
|
else
|
|
buf [0] = 0;
|
|
if (ohci->num_ports > 7) {
|
|
buf [1] = 0;
|
|
length++;
|
|
}
|
|
|
|
/* look at each port */
|
|
for (i = 0; i < ohci->num_ports; i++) {
|
|
u32 status = roothub_portstatus (ohci, i);
|
|
|
|
/* can't autostop if ports are connected */
|
|
any_connected |= (status & RH_PS_CCS);
|
|
|
|
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
|
|
| RH_PS_OCIC | RH_PS_PRSC)) {
|
|
changed = 1;
|
|
if (i < 7)
|
|
buf [0] |= 1 << (i + 1);
|
|
else
|
|
buf [1] |= 1 << (i - 7);
|
|
}
|
|
}
|
|
|
|
/* NOTE: vendors didn't always make the same implementation
|
|
* choices for RHSC. Sometimes it triggers on an edge (like
|
|
* setting and maybe clearing a port status change bit); and
|
|
* it's level-triggered on other silicon, active until khubd
|
|
* clears all active port status change bits. If it's still
|
|
* set (level-triggered) we must disable it and rely on
|
|
* polling until khubd re-enables it.
|
|
*/
|
|
if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) {
|
|
ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
|
|
(void) ohci_readl (ohci, &ohci->regs->intrdisable);
|
|
rhsc_enabled = 0;
|
|
}
|
|
hcd->poll_rh = 1;
|
|
|
|
/* carry out appropriate state changes */
|
|
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
|
|
|
|
case OHCI_USB_OPER:
|
|
/* keep on polling until we know a device is connected
|
|
* and RHSC is enabled */
|
|
if (!ohci->autostop) {
|
|
if (any_connected) {
|
|
if (rhsc_enabled)
|
|
hcd->poll_rh = 0;
|
|
} else {
|
|
ohci->autostop = 1;
|
|
ohci->next_statechange = jiffies + HZ;
|
|
}
|
|
|
|
/* if no devices have been attached for one second, autostop */
|
|
} else {
|
|
if (changed || any_connected) {
|
|
ohci->autostop = 0;
|
|
ohci->next_statechange = jiffies +
|
|
STATECHANGE_DELAY;
|
|
} else if (device_may_wakeup(&hcd->self.root_hub->dev)
|
|
&& time_after_eq(jiffies,
|
|
ohci->next_statechange)
|
|
&& !ohci->ed_rm_list
|
|
&& !(ohci->hc_control &
|
|
OHCI_SCHED_ENABLES)) {
|
|
ohci_rh_suspend (ohci, 1);
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* if there is a port change, autostart or ask to be resumed */
|
|
case OHCI_USB_SUSPEND:
|
|
case OHCI_USB_RESUME:
|
|
if (changed) {
|
|
if (ohci->autostop)
|
|
ohci_rh_resume (ohci);
|
|
else
|
|
usb_hcd_resume_root_hub (hcd);
|
|
} else {
|
|
/* everything is idle, no need for polling */
|
|
hcd->poll_rh = 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
done:
|
|
spin_unlock_irqrestore (&ohci->lock, flags);
|
|
|
|
return changed ? length : 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void
|
|
ohci_hub_descriptor (
|
|
struct ohci_hcd *ohci,
|
|
struct usb_hub_descriptor *desc
|
|
) {
|
|
u32 rh = roothub_a (ohci);
|
|
u16 temp;
|
|
|
|
desc->bDescriptorType = 0x29;
|
|
desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
|
|
desc->bHubContrCurrent = 0;
|
|
|
|
desc->bNbrPorts = ohci->num_ports;
|
|
temp = 1 + (ohci->num_ports / 8);
|
|
desc->bDescLength = 7 + 2 * temp;
|
|
|
|
temp = 0;
|
|
if (rh & RH_A_NPS) /* no power switching? */
|
|
temp |= 0x0002;
|
|
if (rh & RH_A_PSM) /* per-port power switching? */
|
|
temp |= 0x0001;
|
|
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
|
|
temp |= 0x0010;
|
|
else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */
|
|
temp |= 0x0008;
|
|
desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);
|
|
|
|
/* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
|
|
rh = roothub_b (ohci);
|
|
memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
|
|
desc->bitmap [0] = rh & RH_B_DR;
|
|
if (ohci->num_ports > 7) {
|
|
desc->bitmap [1] = (rh & RH_B_DR) >> 8;
|
|
desc->bitmap [2] = 0xff;
|
|
} else
|
|
desc->bitmap [1] = 0xff;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
|
|
static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
u32 status;
|
|
|
|
if (!port)
|
|
return -EINVAL;
|
|
port--;
|
|
|
|
/* start port reset before HNP protocol times out */
|
|
status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
|
|
if (!(status & RH_PS_CCS))
|
|
return -ENODEV;
|
|
|
|
/* khubd will finish the reset later */
|
|
ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
|
|
return 0;
|
|
}
|
|
|
|
static void start_hnp(struct ohci_hcd *ohci);
|
|
|
|
#else
|
|
|
|
#define ohci_start_port_reset NULL
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
/* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling,
|
|
* not necessarily continuous ... to guard against resume signaling.
|
|
* The short timeout is safe for non-root hubs, and is backward-compatible
|
|
* with earlier Linux hosts.
|
|
*/
|
|
#ifdef CONFIG_USB_SUSPEND
|
|
#define PORT_RESET_MSEC 50
|
|
#else
|
|
#define PORT_RESET_MSEC 10
|
|
#endif
|
|
|
|
/* this timer value might be vendor-specific ... */
|
|
#define PORT_RESET_HW_MSEC 10
|
|
|
|
/* wrap-aware logic morphed from <linux/jiffies.h> */
|
|
#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
|
|
|
|
/* called from some task, normally khubd */
|
|
static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
|
|
{
|
|
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
|
|
u32 temp;
|
|
u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
|
|
u16 reset_done = now + PORT_RESET_MSEC;
|
|
|
|
/* build a "continuous enough" reset signal, with up to
|
|
* 3msec gap between pulses. scheduler HZ==100 must work;
|
|
* this might need to be deadline-scheduled.
|
|
*/
|
|
do {
|
|
/* spin until any current reset finishes */
|
|
for (;;) {
|
|
temp = ohci_readl (ohci, portstat);
|
|
if (!(temp & RH_PS_PRS))
|
|
break;
|
|
udelay (500);
|
|
}
|
|
|
|
if (!(temp & RH_PS_CCS))
|
|
break;
|
|
if (temp & RH_PS_PRSC)
|
|
ohci_writel (ohci, RH_PS_PRSC, portstat);
|
|
|
|
/* start the next reset, sleep till it's probably done */
|
|
ohci_writel (ohci, RH_PS_PRS, portstat);
|
|
msleep(PORT_RESET_HW_MSEC);
|
|
now = ohci_readl(ohci, &ohci->regs->fmnumber);
|
|
} while (tick_before(now, reset_done));
|
|
/* caller synchronizes using PRSC */
|
|
}
|
|
|
|
static int ohci_hub_control (
|
|
struct usb_hcd *hcd,
|
|
u16 typeReq,
|
|
u16 wValue,
|
|
u16 wIndex,
|
|
char *buf,
|
|
u16 wLength
|
|
) {
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int ports = hcd_to_bus (hcd)->root_hub->maxchild;
|
|
u32 temp;
|
|
int retval = 0;
|
|
|
|
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
|
|
return -ESHUTDOWN;
|
|
|
|
switch (typeReq) {
|
|
case ClearHubFeature:
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
ohci_writel (ohci, RH_HS_OCIC,
|
|
&ohci->regs->roothub.status);
|
|
case C_HUB_LOCAL_POWER:
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
break;
|
|
case ClearPortFeature:
|
|
if (!wIndex || wIndex > ports)
|
|
goto error;
|
|
wIndex--;
|
|
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
temp = RH_PS_CCS;
|
|
break;
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
temp = RH_PS_PESC;
|
|
break;
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
temp = RH_PS_POCI;
|
|
break;
|
|
case USB_PORT_FEAT_C_SUSPEND:
|
|
temp = RH_PS_PSSC;
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
temp = RH_PS_LSDA;
|
|
break;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
temp = RH_PS_CSC;
|
|
break;
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
temp = RH_PS_OCIC;
|
|
break;
|
|
case USB_PORT_FEAT_C_RESET:
|
|
temp = RH_PS_PRSC;
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
ohci_writel (ohci, temp,
|
|
&ohci->regs->roothub.portstatus [wIndex]);
|
|
// ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
|
|
break;
|
|
case GetHubDescriptor:
|
|
ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
|
|
break;
|
|
case GetHubStatus:
|
|
temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
|
|
put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
|
|
break;
|
|
case GetPortStatus:
|
|
if (!wIndex || wIndex > ports)
|
|
goto error;
|
|
wIndex--;
|
|
temp = roothub_portstatus (ohci, wIndex);
|
|
put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
|
|
|
|
#ifndef OHCI_VERBOSE_DEBUG
|
|
if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
|
|
#endif
|
|
dbg_port (ohci, "GetStatus", wIndex, temp);
|
|
break;
|
|
case SetHubFeature:
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
// FIXME: this can be cleared, yes?
|
|
case C_HUB_LOCAL_POWER:
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
break;
|
|
case SetPortFeature:
|
|
if (!wIndex || wIndex > ports)
|
|
goto error;
|
|
wIndex--;
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
#ifdef CONFIG_USB_OTG
|
|
if (hcd->self.otg_port == (wIndex + 1)
|
|
&& hcd->self.b_hnp_enable)
|
|
start_hnp(ohci);
|
|
else
|
|
#endif
|
|
ohci_writel (ohci, RH_PS_PSS,
|
|
&ohci->regs->roothub.portstatus [wIndex]);
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
ohci_writel (ohci, RH_PS_PPS,
|
|
&ohci->regs->roothub.portstatus [wIndex]);
|
|
break;
|
|
case USB_PORT_FEAT_RESET:
|
|
root_port_reset (ohci, wIndex);
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
error:
|
|
/* "protocol stall" on error */
|
|
retval = -EPIPE;
|
|
}
|
|
return retval;
|
|
}
|
|
|