AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
5a0d80ea80
kernel_optimize_test/arch/arm/mach-davinci/include/mach
History
Michael Williamson 5a0d80ea80 davinci: da850: move da850_evm specific mmcsd pinmux array to board file. 
The da850_mmcsd0_pins pinmux array contains pins that are specific to the
da850 evm board (the write protect and card detect GPIO pins).  Move
the array to the board file.

Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:29 -08:00
..
aemif.h davinci: add support for aemif timing configuration 2010-09-24 07:40:26 -07:00
asp.h ASoC: davinci: let platform data define edma queue numbers 2010-07-20 09:57:20 +01:00
cdce949.h davinci: add support for CDCE949 clock synthesizer 2010-02-04 13:29:58 -08:00
clkdev.h
clock.h
common.h Davinci: iotable based ioremap() interception 2010-05-13 10:05:31 -07:00
cp_intc.h Davinci: aintc/cpintc - use ioremap() 2010-05-13 10:05:28 -07:00
cpufreq.h davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator 2009-11-25 10:21:37 -08:00
cpuidle.h davinci: cpuidle: move mapping of DDR2 controller registers out of driver 2010-02-04 13:29:38 -08:00
cputype.h Davinci: tnetv107x cpu types 2010-05-06 15:02:05 -07:00
da8xx.h davinci: da850: move da850_evm specific mmcsd pinmux array to board file. 2011-02-28 14:53:29 -08:00
debug-macro.S arm: return both physical and virtual addresses from addruart 2010-10-20 00:27:33 -04:00
dm355.h DaVinci: move AEMIF #define's to the proper headers 2010-05-06 15:02:06 -07:00
dm365.h davinci: cleanup mdio arch code and switch to phy_id 2010-09-24 07:40:30 -07:00
dm644x.h davinci: cleanup mdio arch code and switch to phy_id 2010-09-24 07:40:30 -07:00
dm646x.h davinci: cleanup mdio arch code and switch to phy_id 2010-09-24 07:40:30 -07:00
edma.h davinci: support for EDMA resource sharing 2010-08-05 09:58:25 -07:00
entry-macro.S
gpio.h Davinci: tnetv107x initial gpio support 2010-06-21 12:48:31 -07:00
hardware.h ARM: 5928/1: Change type of VMALLOC_END to unsigned long. 2010-02-15 21:40:33 +00:00
i2c.h Merge branch 'for-next' into for-linus 2010-03-08 16:55:37 +01:00
io.h ARM: io: make iounmap() a simple macro 2010-12-08 13:57:04 +00:00
irqs.h Davinci: tnetv107x IRQ definitions 2010-05-06 15:02:05 -07:00
keyscan.h Input: davinci_keyscan - add device_enable method to platform data 2010-01-06 00:17:11 -08:00
memory.h ARM: Remove 'node' argument form arch_adjust_zones() 2010-07-16 10:57:36 +01:00
mmc.h davinci: mmc: pass number of SG segments as platform data 2010-05-27 09:12:39 -07:00
mux.h davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard 2011-02-28 14:53:28 -08:00
nand.h nand: davinci: add support for timing configuration 2010-09-24 07:40:26 -07:00
pm.h davinci: add power management support 2010-02-04 13:29:55 -08:00
psc.h DA850: Add LPSC id for MMCSD1 peripheral 2010-09-24 07:40:26 -07:00
serial.h Davinci: tnetv107x decompresser uart definitions 2010-06-21 12:48:30 -07:00
spi.h spi: davinci: add additional comments 2010-11-18 18:38:37 +05:30
sram.h
system.h Davinci: watchdog reset separation across socs 2010-05-06 15:02:09 -07:00
time.h
timex.h davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h 2010-02-04 13:29:41 -08:00
tnetv107x.h davinci: add tnetv107x keypad platform device 2010-09-24 07:40:31 -07:00
uncompress.h davinci: Initial support for Omapl138-Hawkboard 2010-09-24 07:40:32 -07:00
usb.h DaVinci: rename setup_usb() to davinci_setup_usb() 2009-11-25 10:21:33 -08:00
vmalloc.h