kernel_optimize_test/drivers/video/cyberfb.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

416 lines
13 KiB
C

/*
* linux/arch/m68k/console/cvision.h -- CyberVision64 definitions for the
* text console driver.
*
* Copyright (c) 1998 Alan Bair
*
* This file is based on the initial port to Linux of grf_cvreg.h:
*
* Copyright (c) 1997 Antonio Santos
*
* The original work is from the NetBSD CyberVision 64 framebuffer driver
* and support files (grf_cv.c, grf_cvreg.h, ite_cv.c):
* Permission to use the source of this driver was obtained from the
* author Michael Teske by Alan Bair.
*
* Copyright (c) 1995 Michael Teske
*
* History:
*
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/* s3 commands */
#define S3_BITBLT 0xc011
#define S3_TWOPOINTLINE 0x2811
#define S3_FILLEDRECT 0x40b1
#define S3_FIFO_EMPTY 0x0400
#define S3_HDW_BUSY 0x0200
/* Enhanced register mapping (MMIO mode) */
#define S3_READ_SEL 0xbee8 /* offset f */
#define S3_MULT_MISC 0xbee8 /* offset e */
#define S3_ERR_TERM 0x92e8
#define S3_FRGD_COLOR 0xa6e8
#define S3_BKGD_COLOR 0xa2e8
#define S3_PIXEL_CNTL 0xbee8 /* offset a */
#define S3_FRGD_MIX 0xbae8
#define S3_BKGD_MIX 0xb6e8
#define S3_CUR_Y 0x82e8
#define S3_CUR_X 0x86e8
#define S3_DESTY_AXSTP 0x8ae8
#define S3_DESTX_DIASTP 0x8ee8
#define S3_MIN_AXIS_PCNT 0xbee8 /* offset 0 */
#define S3_MAJ_AXIS_PCNT 0x96e8
#define S3_CMD 0x9ae8
#define S3_GP_STAT 0x9ae8
#define S3_ADVFUNC_CNTL 0x4ae8
#define S3_WRT_MASK 0xaae8
#define S3_RD_MASK 0xaee8
/* Enhanced register mapping (Packed MMIO mode, write only) */
#define S3_ALT_CURXY 0x8100
#define S3_ALT_CURXY2 0x8104
#define S3_ALT_STEP 0x8108
#define S3_ALT_STEP2 0x810c
#define S3_ALT_ERR 0x8110
#define S3_ALT_CMD 0x8118
#define S3_ALT_MIX 0x8134
#define S3_ALT_PCNT 0x8148
#define S3_ALT_PAT 0x8168
/* Drawing modes */
#define S3_NOTCUR 0x0000
#define S3_LOGICALZERO 0x0001
#define S3_LOGICALONE 0x0002
#define S3_LEAVEASIS 0x0003
#define S3_NOTNEW 0x0004
#define S3_CURXORNEW 0x0005
#define S3_NOT_CURXORNEW 0x0006
#define S3_NEW 0x0007
#define S3_NOTCURORNOTNEW 0x0008
#define S3_CURORNOTNEW 0x0009
#define S3_NOTCURORNEW 0x000a
#define S3_CURORNEW 0x000b
#define S3_CURANDNEW 0x000c
#define S3_NOTCURANDNEW 0x000d
#define S3_CURANDNOTNEW 0x000e
#define S3_NOTCURANDNOTNEW 0x000f
#define S3_CRTC_ADR 0x03d4
#define S3_CRTC_DATA 0x03d5
#define S3_REG_LOCK2 0x39
#define S3_HGC_MODE 0x45
#define S3_HWGC_ORGX_H 0x46
#define S3_HWGC_ORGX_L 0x47
#define S3_HWGC_ORGY_H 0x48
#define S3_HWGC_ORGY_L 0x49
#define S3_HWGC_DX 0x4e
#define S3_HWGC_DY 0x4f
#define S3_LAW_CTL 0x58
/**************************************************/
/* support for a BitBlt operation. The op-codes are identical
to X11 GCs */
#define GRFBBOPclear 0x0 /* 0 */
#define GRFBBOPand 0x1 /* src AND dst */
#define GRFBBOPandReverse 0x2 /* src AND NOT dst */
#define GRFBBOPcopy 0x3 /* src */
#define GRFBBOPandInverted 0x4 /* NOT src AND dst */
#define GRFBBOPnoop 0x5 /* dst */
#define GRFBBOPxor 0x6 /* src XOR dst */
#define GRFBBOPor 0x7 /* src OR dst */
#define GRFBBOPnor 0x8 /* NOT src AND NOT dst */
#define GRFBBOPequiv 0x9 /* NOT src XOR dst */
#define GRFBBOPinvert 0xa /* NOT dst */
#define GRFBBOPorReverse 0xb /* src OR NOT dst */
#define GRFBBOPcopyInverted 0xc /* NOT src */
#define GRFBBOPorInverted 0xd /* NOT src OR dst */
#define GRFBBOPnand 0xe /* NOT src OR NOT dst */
#define GRFBBOPset 0xf /* 1 */
/* Write 16 Bit VGA register */
#define vgaw16(ba, reg, val) \
*((unsigned short *) (((volatile unsigned char *)ba)+reg)) = val
/*
* Defines for the used register addresses (mw)
*
* NOTE: There are some registers that have different addresses when
* in mono or color mode. We only support color mode, and thus
* some addresses won't work in mono-mode!
*
* General and VGA-registers taken from retina driver. Fixed a few
* bugs in it. (SR and GR read address is Port + 1, NOT Port)
*
*/
/* General Registers: */
#define GREG_MISC_OUTPUT_R 0x03CC
#define GREG_MISC_OUTPUT_W 0x03C2
#define GREG_FEATURE_CONTROL_R 0x03CA
#define GREG_FEATURE_CONTROL_W 0x03DA
#define GREG_INPUT_STATUS0_R 0x03C2
#define GREG_INPUT_STATUS1_R 0x03DA
/* Setup Registers: */
#define SREG_OPTION_SELECT 0x0102
#define SREG_VIDEO_SUBS_ENABLE 0x46E8
/* Attribute Controller: */
#define ACT_ADDRESS 0x03C0
#define ACT_ADDRESS_R 0x03C1
#define ACT_ADDRESS_W 0x03C0
#define ACT_ADDRESS_RESET 0x03DA
#define ACT_ID_PALETTE0 0x00
#define ACT_ID_PALETTE1 0x01
#define ACT_ID_PALETTE2 0x02
#define ACT_ID_PALETTE3 0x03
#define ACT_ID_PALETTE4 0x04
#define ACT_ID_PALETTE5 0x05
#define ACT_ID_PALETTE6 0x06
#define ACT_ID_PALETTE7 0x07
#define ACT_ID_PALETTE8 0x08
#define ACT_ID_PALETTE9 0x09
#define ACT_ID_PALETTE10 0x0A
#define ACT_ID_PALETTE11 0x0B
#define ACT_ID_PALETTE12 0x0C
#define ACT_ID_PALETTE13 0x0D
#define ACT_ID_PALETTE14 0x0E
#define ACT_ID_PALETTE15 0x0F
#define ACT_ID_ATTR_MODE_CNTL 0x10
#define ACT_ID_OVERSCAN_COLOR 0x11
#define ACT_ID_COLOR_PLANE_ENA 0x12
#define ACT_ID_HOR_PEL_PANNING 0x13
#define ACT_ID_COLOR_SELECT 0x14
/* Graphics Controller: */
#define GCT_ADDRESS 0x03CE
#define GCT_ADDRESS_R 0x03CF
#define GCT_ADDRESS_W 0x03CF
#define GCT_ID_SET_RESET 0x00
#define GCT_ID_ENABLE_SET_RESET 0x01
#define GCT_ID_COLOR_COMPARE 0x02
#define GCT_ID_DATA_ROTATE 0x03
#define GCT_ID_READ_MAP_SELECT 0x04
#define GCT_ID_GRAPHICS_MODE 0x05
#define GCT_ID_MISC 0x06
#define GCT_ID_COLOR_XCARE 0x07
#define GCT_ID_BITMASK 0x08
/* Sequencer: */
#define SEQ_ADDRESS 0x03C4
#define SEQ_ADDRESS_R 0x03C5
#define SEQ_ADDRESS_W 0x03C5
#define SEQ_ID_RESET 0x00
#define SEQ_ID_CLOCKING_MODE 0x01
#define SEQ_ID_MAP_MASK 0x02
#define SEQ_ID_CHAR_MAP_SELECT 0x03
#define SEQ_ID_MEMORY_MODE 0x04
#define SEQ_ID_UNKNOWN1 0x05
#define SEQ_ID_UNKNOWN2 0x06
#define SEQ_ID_UNKNOWN3 0x07
/* S3 extensions */
#define SEQ_ID_UNLOCK_EXT 0x08
#define SEQ_ID_EXT_SEQ_REG9 0x09
#define SEQ_ID_BUS_REQ_CNTL 0x0A
#define SEQ_ID_EXT_MISC_SEQ 0x0B
#define SEQ_ID_UNKNOWN4 0x0C
#define SEQ_ID_EXT_SEQ 0x0D
#define SEQ_ID_UNKNOWN5 0x0E
#define SEQ_ID_UNKNOWN6 0x0F
#define SEQ_ID_MCLK_LO 0x10
#define SEQ_ID_MCLK_HI 0x11
#define SEQ_ID_DCLK_LO 0x12
#define SEQ_ID_DCLK_HI 0x13
#define SEQ_ID_CLKSYN_CNTL_1 0x14
#define SEQ_ID_CLKSYN_CNTL_2 0x15
#define SEQ_ID_CLKSYN_TEST_HI 0x16 /* reserved for S3 testing of the */
#define SEQ_ID_CLKSYN_TEST_LO 0x17 /* internal clock synthesizer */
#define SEQ_ID_RAMDAC_CNTL 0x18
#define SEQ_ID_MORE_MAGIC 0x1A
/* CRT Controller: */
#define CRT_ADDRESS 0x03D4
#define CRT_ADDRESS_R 0x03D5
#define CRT_ADDRESS_W 0x03D5
#define CRT_ID_HOR_TOTAL 0x00
#define CRT_ID_HOR_DISP_ENA_END 0x01
#define CRT_ID_START_HOR_BLANK 0x02
#define CRT_ID_END_HOR_BLANK 0x03
#define CRT_ID_START_HOR_RETR 0x04
#define CRT_ID_END_HOR_RETR 0x05
#define CRT_ID_VER_TOTAL 0x06
#define CRT_ID_OVERFLOW 0x07
#define CRT_ID_PRESET_ROW_SCAN 0x08
#define CRT_ID_MAX_SCAN_LINE 0x09
#define CRT_ID_CURSOR_START 0x0A
#define CRT_ID_CURSOR_END 0x0B
#define CRT_ID_START_ADDR_HIGH 0x0C
#define CRT_ID_START_ADDR_LOW 0x0D
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
#define CRT_ID_CURSOR_LOC_LOW 0x0F
#define CRT_ID_START_VER_RETR 0x10
#define CRT_ID_END_VER_RETR 0x11
#define CRT_ID_VER_DISP_ENA_END 0x12
#define CRT_ID_SCREEN_OFFSET 0x13
#define CRT_ID_UNDERLINE_LOC 0x14
#define CRT_ID_START_VER_BLANK 0x15
#define CRT_ID_END_VER_BLANK 0x16
#define CRT_ID_MODE_CONTROL 0x17
#define CRT_ID_LINE_COMPARE 0x18
#define CRT_ID_GD_LATCH_RBACK 0x22
#define CRT_ID_ACT_TOGGLE_RBACK 0x24
#define CRT_ID_ACT_INDEX_RBACK 0x26
/* S3 extensions: S3 VGA Registers */
#define CRT_ID_DEVICE_HIGH 0x2D
#define CRT_ID_DEVICE_LOW 0x2E
#define CRT_ID_REVISION 0x2F
#define CRT_ID_CHIP_ID_REV 0x30
#define CRT_ID_MEMORY_CONF 0x31
#define CRT_ID_BACKWAD_COMP_1 0x32
#define CRT_ID_BACKWAD_COMP_2 0x33
#define CRT_ID_BACKWAD_COMP_3 0x34
#define CRT_ID_REGISTER_LOCK 0x35
#define CRT_ID_CONFIG_1 0x36
#define CRT_ID_CONFIG_2 0x37
#define CRT_ID_REGISTER_LOCK_1 0x38
#define CRT_ID_REGISTER_LOCK_2 0x39
#define CRT_ID_MISC_1 0x3A
#define CRT_ID_DISPLAY_FIFO 0x3B
#define CRT_ID_LACE_RETR_START 0x3C
/* S3 extensions: System Control Registers */
#define CRT_ID_SYSTEM_CONFIG 0x40
#define CRT_ID_BIOS_FLAG 0x41
#define CRT_ID_LACE_CONTROL 0x42
#define CRT_ID_EXT_MODE 0x43
#define CRT_ID_HWGC_MODE 0x45 /* HWGC = Hardware Graphics Cursor */
#define CRT_ID_HWGC_ORIGIN_X_HI 0x46
#define CRT_ID_HWGC_ORIGIN_X_LO 0x47
#define CRT_ID_HWGC_ORIGIN_Y_HI 0x48
#define CRT_ID_HWGC_ORIGIN_Y_LO 0x49
#define CRT_ID_HWGC_FG_STACK 0x4A
#define CRT_ID_HWGC_BG_STACK 0x4B
#define CRT_ID_HWGC_START_AD_HI 0x4C
#define CRT_ID_HWGC_START_AD_LO 0x4D
#define CRT_ID_HWGC_DSTART_X 0x4E
#define CRT_ID_HWGC_DSTART_Y 0x4F
/* S3 extensions: System Extension Registers */
#define CRT_ID_EXT_SYS_CNTL_1 0x50
#define CRT_ID_EXT_SYS_CNTL_2 0x51
#define CRT_ID_EXT_BIOS_FLAG_1 0x52
#define CRT_ID_EXT_MEM_CNTL_1 0x53
#define CRT_ID_EXT_MEM_CNTL_2 0x54
#define CRT_ID_EXT_DAC_CNTL 0x55
#define CRT_ID_EX_SYNC_1 0x56
#define CRT_ID_EX_SYNC_2 0x57
#define CRT_ID_LAW_CNTL 0x58 /* LAW = Linear Address Window */
#define CRT_ID_LAW_POS_HI 0x59
#define CRT_ID_LAW_POS_LO 0x5A
#define CRT_ID_GOUT_PORT 0x5C
#define CRT_ID_EXT_HOR_OVF 0x5D
#define CRT_ID_EXT_VER_OVF 0x5E
#define CRT_ID_EXT_MEM_CNTL_3 0x60
#define CRT_ID_EX_SYNC_3 0x63
#define CRT_ID_EXT_MISC_CNTL 0x65
#define CRT_ID_EXT_MISC_CNTL_1 0x66
#define CRT_ID_EXT_MISC_CNTL_2 0x67
#define CRT_ID_CONFIG_3 0x68
#define CRT_ID_EXT_SYS_CNTL_3 0x69
#define CRT_ID_EXT_SYS_CNTL_4 0x6A
#define CRT_ID_EXT_BIOS_FLAG_3 0x6B
#define CRT_ID_EXT_BIOS_FLAG_4 0x6C
/* Enhanced Commands Registers: */
#define ECR_SUBSYSTEM_STAT 0x42E8
#define ECR_SUBSYSTEM_CNTL 0x42E8
#define ECR_ADV_FUNC_CNTL 0x4AE8
#define ECR_CURRENT_Y_POS 0x82E8
#define ECR_CURRENT_Y_POS2 0x82EA /* Trio64 only */
#define ECR_CURRENT_X_POS 0x86E8
#define ECR_CURRENT_X_POS2 0x86EA /* Trio64 only */
#define ECR_DEST_Y__AX_STEP 0x8AE8
#define ECR_DEST_Y2__AX_STEP2 0x8AEA /* Trio64 only */
#define ECR_DEST_X__DIA_STEP 0x8EE8
#define ECR_DEST_X2__DIA_STEP2 0x8EEA /* Trio64 only */
#define ECR_ERR_TERM 0x92E8
#define ECR_ERR_TERM2 0x92EA /* Trio64 only */
#define ECR_MAJ_AXIS_PIX_CNT 0x96E8
#define ECR_MAJ_AXIS_PIX_CNT2 0x96EA /* Trio64 only */
#define ECR_GP_STAT 0x9AE8 /* GP = Graphics Processor */
#define ECR_DRAW_CMD 0x9AE8
#define ECR_DRAW_CMD2 0x9AEA /* Trio64 only */
#define ECR_SHORT_STROKE 0x9EE8
#define ECR_BKGD_COLOR 0xA2E8 /* BKGD = Background */
#define ECR_FRGD_COLOR 0xA6E8 /* FRGD = Foreground */
#define ECR_BITPLANE_WRITE_MASK 0xAAE8
#define ECR_BITPLANE_READ_MASK 0xAEE8
#define ECR_COLOR_COMPARE 0xB2E8
#define ECR_BKGD_MIX 0xB6E8
#define ECR_FRGD_MIX 0xBAE8
#define ECR_READ_REG_DATA 0xBEE8
#define ECR_ID_MIN_AXIS_PIX_CNT 0x00
#define ECR_ID_SCISSORS_TOP 0x01
#define ECR_ID_SCISSORS_LEFT 0x02
#define ECR_ID_SCISSORS_BUTTOM 0x03
#define ECR_ID_SCISSORS_RIGHT 0x04
#define ECR_ID_PIX_CNTL 0x0A
#define ECR_ID_MULT_CNTL_MISC_2 0x0D
#define ECR_ID_MULT_CNTL_MISC 0x0E
#define ECR_ID_READ_SEL 0x0F
#define ECR_PIX_TRANS 0xE2E8
#define ECR_PIX_TRANS_EXT 0xE2EA
#define ECR_PATTERN_Y 0xEAE8 /* Trio64 only */
#define ECR_PATTERN_X 0xEAEA /* Trio64 only */
/* Pass-through */
#define PASS_ADDRESS 0x40001
#define PASS_ADDRESS_W 0x40001
/* Video DAC */
#define VDAC_ADDRESS 0x03c8
#define VDAC_ADDRESS_W 0x03c8
#define VDAC_ADDRESS_R 0x03c7
#define VDAC_STATE 0x03c7
#define VDAC_DATA 0x03c9
#define VDAC_MASK 0x03c6
#define WGfx(ba, idx, val) \
do { wb_64(ba, GCT_ADDRESS, idx); wb_64(ba, GCT_ADDRESS_W , val); } while (0)
#define WSeq(ba, idx, val) \
do { wb_64(ba, SEQ_ADDRESS, idx); wb_64(ba, SEQ_ADDRESS_W , val); } while (0)
#define WCrt(ba, idx, val) \
do { wb_64(ba, CRT_ADDRESS, idx); wb_64(ba, CRT_ADDRESS_W , val); } while (0)
#define WAttr(ba, idx, val) \
do { \
unsigned char tmp;\
tmp = rb_64(ba, ACT_ADDRESS_RESET);\
wb_64(ba, ACT_ADDRESS_W, idx);\
wb_64(ba, ACT_ADDRESS_W, val);\
} while (0)
#define SetTextPlane(ba, m) \
do { \
WGfx(ba, GCT_ID_READ_MAP_SELECT, m & 3 );\
WSeq(ba, SEQ_ID_MAP_MASK, (1 << (m & 3)));\
} while (0)
/* --------------------------------- */
/* prototypes */
/* --------------------------------- */
inline unsigned char RAttr(volatile unsigned char * board, short idx);
inline unsigned char RSeq(volatile unsigned char * board, short idx);
inline unsigned char RCrt(volatile unsigned char * board, short idx);
inline unsigned char RGfx(volatile unsigned char * board, short idx);
inline void cv64_write_port(unsigned short bits,
volatile unsigned char *board);
inline void cvscreen(int toggle, volatile unsigned char *board);
inline void gfx_on_off(int toggle, volatile unsigned char *board);
#if 0
unsigned short cv64_compute_clock(unsigned long freq);
int cv_has_4mb(volatile unsigned char * fb);
void cv64_board_init(void);
void cv64_load_video_mode(struct fb_var_screeninfo *video_mode);
#endif
void cvision_bitblt(u_short sx, u_short sy, u_short dx, u_short dy, u_short w,
u_short h);
void cvision_clear(u_short dx, u_short dy, u_short w, u_short h, u_short bg);