forked from luck/tmp_suning_uos_patched
3f0292ae8b
This patch adds support for regulators that can be controlled via gpios.
Examples for such regulators are the TI-tps65024x voltage regulators
with 4 fixed and 1 runtime-switchable voltage regulators
or the TI-bq240XX charger regulators.
The number of controlling gpios is not limited, the mapping between
voltage/current and target gpio state is done via the states map
and the driver can be used for either voltage or current regulators.
A mapping for a regulator with two GPIOs could look like:
gpios = {
{ .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" },
{ .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW, .label = "gpio name 2" },
}
The flags element of the gpios array determines the initial state of
the gpio, set during probe. The initial state of the regulator is also
calculated from these values
states = {
{ .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) },
{ .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) },
{ .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) },
{ .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) },
}
The target-state for the n-th gpio is determined by the n-th bit
in the bitfield of the target-value.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
51 lines
2.2 KiB
Makefile
51 lines
2.2 KiB
Makefile
#
|
|
# Makefile for regulator drivers.
|
|
#
|
|
|
|
|
|
obj-$(CONFIG_REGULATOR) += core.o dummy.o
|
|
obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
|
|
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
|
|
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
|
|
|
|
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
|
|
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
|
|
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
|
|
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
|
|
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
|
|
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
|
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
|
|
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
|
|
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
|
|
obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
|
|
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
|
|
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
|
|
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
|
|
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
|
|
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
|
|
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
|
|
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
|
|
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
|
|
obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
|
|
obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
|
|
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
|
|
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
|
|
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
|
|
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
|
|
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
|
|
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
|
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
|
|
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
|
|
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
|
|
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
|
|
obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
|
|
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
|
|
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
|
|
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
|
|
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
|
|
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
|
|
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
|
|
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
|
|
|
|
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
|