kernel_optimize_test/drivers/spi/spi-pxa2xx.h
Jarkko Nikula c039dd275e spi: pxa2xx: Cleanup register access macros
Currently SSP registers are accessed by having an own read and write macros
for each register. For instance read_SSSR(iobase) and write_SSSR(iobase).

In my opinion this hurts readability and requires new macros to be defined
for each new added register. Let's define and use instead common
pxa2xx_spi_read() and pxa2xx_spi_write() accessors.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 20:17:23 +00:00

220 lines
5.5 KiB
C

/*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
* Copyright (C) 2013, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef SPI_PXA2XX_H
#define SPI_PXA2XX_H
#include <linux/atomic.h>
#include <linux/dmaengine.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/pxa2xx_ssp.h>
#include <linux/scatterlist.h>
#include <linux/sizes.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
struct driver_data {
/* Driver model hookup */
struct platform_device *pdev;
/* SSP Info */
struct ssp_device *ssp;
/* SPI framework hookup */
enum pxa_ssp_type ssp_type;
struct spi_master *master;
/* PXA hookup */
struct pxa2xx_spi_master *master_info;
/* PXA private DMA setup stuff */
int rx_channel;
int tx_channel;
u32 *null_dma_buf;
/* SSP register addresses */
void __iomem *ioaddr;
u32 ssdr_physical;
/* SSP masks*/
u32 dma_cr1;
u32 int_cr1;
u32 clear_sr;
u32 mask_sr;
/* Maximun clock rate */
unsigned long max_clk_rate;
/* Message Transfer pump */
struct tasklet_struct pump_transfers;
/* DMA engine support */
struct dma_chan *rx_chan;
struct dma_chan *tx_chan;
struct sg_table rx_sgt;
struct sg_table tx_sgt;
int rx_nents;
int tx_nents;
void *dummy;
atomic_t dma_running;
/* Current message transfer state info */
struct spi_message *cur_msg;
struct spi_transfer *cur_transfer;
struct chip_data *cur_chip;
size_t len;
void *tx;
void *tx_end;
void *rx;
void *rx_end;
int dma_mapped;
dma_addr_t rx_dma;
dma_addr_t tx_dma;
size_t rx_map_len;
size_t tx_map_len;
u8 n_bytes;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
void (*cs_control)(u32 command);
void __iomem *lpss_base;
};
struct chip_data {
u32 cr0;
u32 cr1;
u32 dds_rate;
u32 psp;
u32 timeout;
u8 n_bytes;
u32 dma_burst_size;
u32 threshold;
u32 dma_threshold;
u16 lpss_rx_threshold;
u16 lpss_tx_threshold;
u8 enable_dma;
u8 bits_per_word;
u32 speed_hz;
union {
int gpio_cs;
unsigned int frm;
};
int gpio_cs_inverted;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
void (*cs_control)(u32 command);
};
static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data,
unsigned reg)
{
return __raw_readl(drv_data->ioaddr + reg);
}
static inline void pxa2xx_spi_write(const struct driver_data *drv_data,
unsigned reg, u32 val)
{
__raw_writel(val, drv_data->ioaddr + reg);
}
#define START_STATE ((void *)0)
#define RUNNING_STATE ((void *)1)
#define DONE_STATE ((void *)2)
#define ERROR_STATE ((void *)-1)
#define IS_DMA_ALIGNED(x) IS_ALIGNED((unsigned long)(x), DMA_ALIGNMENT)
#define DMA_ALIGNMENT 8
static inline int pxa25x_ssp_comp(struct driver_data *drv_data)
{
switch (drv_data->ssp_type) {
case PXA25x_SSP:
case CE4100_SSP:
case QUARK_X1000_SSP:
return 1;
default:
return 0;
}
}
static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val)
{
if (drv_data->ssp_type == CE4100_SSP ||
drv_data->ssp_type == QUARK_X1000_SSP)
val |= pxa2xx_spi_read(drv_data, SSSR) & SSSR_ALT_FRM_MASK;
pxa2xx_spi_write(drv_data, SSSR, val);
}
extern int pxa2xx_spi_flush(struct driver_data *drv_data);
extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
/*
* Select the right DMA implementation.
*/
#if defined(CONFIG_SPI_PXA2XX_PXADMA)
#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN 8191
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE)
#elif defined(CONFIG_SPI_PXA2XX_DMA)
#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN SZ_64K
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
#else
#undef SPI_PXA2XX_USE_DMA
#define MAX_DMA_LEN 0
#define DEFAULT_DMA_CR1 0
#endif
#ifdef SPI_PXA2XX_USE_DMA
extern bool pxa2xx_spi_dma_is_possible(size_t len);
extern int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data);
extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data);
extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst);
extern void pxa2xx_spi_dma_start(struct driver_data *drv_data);
extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data);
extern void pxa2xx_spi_dma_release(struct driver_data *drv_data);
extern void pxa2xx_spi_dma_resume(struct driver_data *drv_data);
extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
struct spi_device *spi,
u8 bits_per_word,
u32 *burst_code,
u32 *threshold);
#else
static inline bool pxa2xx_spi_dma_is_possible(size_t len) { return false; }
static inline int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
{
return 0;
}
#define pxa2xx_spi_dma_transfer NULL
static inline void pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
u32 dma_burst) {}
static inline void pxa2xx_spi_dma_start(struct driver_data *drv_data) {}
static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
{
return 0;
}
static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {}
static inline void pxa2xx_spi_dma_resume(struct driver_data *drv_data) {}
static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
struct spi_device *spi,
u8 bits_per_word,
u32 *burst_code,
u32 *threshold)
{
return -ENODEV;
}
#endif
#endif /* SPI_PXA2XX_H */