Jörg Krause bcb8c27082 ASoC: mxs-saif: fix setting master base rate ... The SAIF base oversample rates are either 512*fs or 384*fs. An additional divider exists within the SAIF to generate sub-multiples of these two base rates if MCLK is required by the codec. * The sub-rates for the 512x base rate are: 256x, 128x, 64x, and 32x. * The sub-rates for the 384x base rate are: 192x, 96x, and 48x. Setting the base rate depending on the modulo operation with 32 and 48 give wrong results for some mclk. If mclk=18.432MHz both modulo operations results in 0. As testing the result with 32 is done first, a wrong base rate of 512*fs is set instead of the correct 384*fs. Fix this by setting the base rate depending on the calculated sub-rate. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by: Mark Brown <broonie@kernel.org>		2017-01-17 18:19:36 +00:00
..
Kconfig	ASoC: mxs: Depends on COMMON_CLK	2013-07-22 14:19:21 +01:00
Makefile
mxs-pcm.c	ASoC: mxs: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag	2014-01-07 11:41:36 +00:00
mxs-pcm.h	ASoC: mxs: Use devm_snd_dmaengine_pcm_register()	2013-12-02 11:49:36 +00:00
mxs-saif.c	ASoC: mxs-saif: fix setting master base rate	2017-01-17 18:19:36 +00:00
mxs-saif.h	ASoC: mxs-saif: Do not store the irq number in the private structure	2014-12-30 16:44:53 +00:00
mxs-sgtl5000.c	ASoC: constify snd_soc_ops structures	2016-10-24 18:34:55 +01:00