kernel_optimize_test/arch/arm/mach-ux500/cpu.c
Per Fransson ffc43ef313 ARM: 6473/1: Small update to ux500 specific L2 cache code
This change updates the ux500 specific outer cache code to use
the new *_relaxed() I/O accessors.

Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21 22:05:56 +00:00

151 lines
3.7 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/localtimer.h>
#include <plat/mtu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include "clock.h"
static struct map_desc ux500_io_desc[] __initdata = {
__IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
};
static struct amba_device *ux500_amba_devs[] __initdata = {
&ux500_pl031_device,
};
void __init ux500_map_io(void)
{
iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
}
void __init ux500_init_devices(void)
{
amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
}
void __init ux500_init_irq(void)
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
/*
* Init clocks here so that they are available for system timer
* initialization.
*/
clk_init();
}
#ifdef CONFIG_CACHE_L2X0
static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
{
/* wait for the operation to complete */
while (readl_relaxed(reg) & mask)
;
}
static inline void ux500_cache_sync(void)
{
void __iomem *base = __io_address(UX500_L2CC_BASE);
writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
/*
* The L2 cache cannot be turned off in the non-secure world.
* Dummy until a secure service is in place.
*/
static void ux500_l2x0_disable(void)
{
}
/*
* This is only called when doing a kexec, just after turning off the L2
* and L1 cache, and it is surrounded by a spinlock in the generic version.
* However, we're not really turning off the L2 cache right now and the
* PL310 does not support exclusive accesses (used to implement the spinlock).
* So, the invalidation needs to be done without the spinlock.
*/
static void ux500_l2x0_inv_all(void)
{
void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}
static int ux500_l2x0_init(void)
{
void __iomem *l2x0_base;
l2x0_base = __io_address(UX500_L2CC_BASE);
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
/* Override invalidate function */
outer_cache.disable = ux500_l2x0_disable;
outer_cache.inv_all = ux500_l2x0_inv_all;
return 0;
}
early_initcall(ux500_l2x0_init);
#endif
static void __init ux500_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
/* Setup the local timer base */
twd_base = __io_address(UX500_TWD_BASE);
#endif
/* Setup the MTU base */
if (cpu_is_u8500ed())
mtu_base = __io_address(U8500_MTU0_BASE_ED);
else
mtu_base = __io_address(UX500_MTU0_BASE);
nmdk_timer_init();
}
struct sys_timer ux500_timer = {
.init = ux500_timer_init,
};