kernel_optimize_test/arch/mips/sibyte/swarm/platform.c
Ralf Baechle 15d45cce3a MIPS: Replace use of phys_t with phys_addr_t.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24 22:47:31 +01:00

140 lines
3.4 KiB
C

#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <asm/sibyte/board.h>
#include <asm/sibyte/sb1250_genbus.h>
#include <asm/sibyte/sb1250_regs.h>
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR)
#define DRV_NAME "pata-swarm"
#define SWARM_IDE_SHIFT 5
#define SWARM_IDE_BASE 0x1f0
#define SWARM_IDE_CTRL 0x3f6
static struct resource swarm_pata_resource[] = {
{
.name = "Swarm GenBus IDE",
.flags = IORESOURCE_MEM,
}, {
.name = "Swarm GenBus IDE",
.flags = IORESOURCE_MEM,
}, {
.name = "Swarm GenBus IDE",
.flags = IORESOURCE_IRQ,
.start = K_INT_GB_IDE,
.end = K_INT_GB_IDE,
},
};
static struct pata_platform_info pata_platform_data = {
.ioport_shift = SWARM_IDE_SHIFT,
};
static struct platform_device swarm_pata_device = {
.name = "pata_platform",
.id = -1,
.resource = swarm_pata_resource,
.num_resources = ARRAY_SIZE(swarm_pata_resource),
.dev = {
.platform_data = &pata_platform_data,
.coherent_dma_mask = ~0, /* grumble */
},
};
static int __init swarm_pata_init(void)
{
u8 __iomem *base;
phys_addr_t offset, size;
struct resource *r;
if (!SIBYTE_HAVE_IDE)
return -ENODEV;
base = ioremap(A_IO_EXT_BASE, 0x800);
offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
iounmap(base);
offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
pr_info(DRV_NAME ": PATA interface at GenBus disabled\n");
return -EBUSY;
}
pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS);
r = swarm_pata_resource;
r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT);
r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1;
r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT);
r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1;
return platform_device_register(&swarm_pata_device);
}
device_initcall(swarm_pata_init);
#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */
#define sb1250_dev_struct(num) \
static struct resource sb1250_res##num = { \
.name = "SB1250 MAC " __stringify(num), \
.flags = IORESOURCE_MEM, \
.start = A_MAC_CHANNEL_BASE(num), \
.end = A_MAC_CHANNEL_BASE(num + 1) -1, \
};\
static struct platform_device sb1250_dev##num = { \
.name = "sb1250-mac", \
.id = num, \
.resource = &sb1250_res##num, \
.num_resources = 1, \
}
sb1250_dev_struct(0);
sb1250_dev_struct(1);
sb1250_dev_struct(2);
sb1250_dev_struct(3);
static struct platform_device *sb1250_devs[] __initdata = {
&sb1250_dev0,
&sb1250_dev1,
&sb1250_dev2,
&sb1250_dev3,
};
static int __init sb1250_device_init(void)
{
int ret;
/* Set the number of available units based on the SOC type. */
switch (soc_type) {
case K_SYS_SOC_TYPE_BCM1250:
case K_SYS_SOC_TYPE_BCM1250_ALT:
ret = platform_add_devices(sb1250_devs, 3);
break;
case K_SYS_SOC_TYPE_BCM1120:
case K_SYS_SOC_TYPE_BCM1125:
case K_SYS_SOC_TYPE_BCM1125H:
case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
ret = platform_add_devices(sb1250_devs, 2);
break;
case K_SYS_SOC_TYPE_BCM1x55:
case K_SYS_SOC_TYPE_BCM1x80:
ret = platform_add_devices(sb1250_devs, 4);
break;
default:
ret = -ENODEV;
break;
}
return ret;
}
device_initcall(sb1250_device_init);