forked from luck/tmp_suning_uos_patched
6748703856
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:
* if the information in i2c_client is sufficient, that's used instead
(client->name);
* anything else is handled by calling i2c_match_id() with the same
level of error-handling (if any) as before.
A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
1833 lines
53 KiB
C
1833 lines
53 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* A hwmon driver for the Analog Devices ADT7462
|
|
* Copyright (C) 2008 IBM
|
|
*
|
|
* Author: Darrick J. Wong <darrick.wong@oracle.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END };
|
|
|
|
/* ADT7462 registers */
|
|
#define ADT7462_REG_DEVICE 0x3D
|
|
#define ADT7462_REG_VENDOR 0x3E
|
|
#define ADT7462_REG_REVISION 0x3F
|
|
|
|
#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44
|
|
#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47
|
|
#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48
|
|
#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B
|
|
#define ADT7462_REG_TEMP_BASE_ADDR 0x88
|
|
#define ADT7462_REG_TEMP_MAX_ADDR 0x8F
|
|
|
|
#define ADT7462_REG_FAN_BASE_ADDR 0x98
|
|
#define ADT7462_REG_FAN_MAX_ADDR 0x9F
|
|
#define ADT7462_REG_FAN2_BASE_ADDR 0xA2
|
|
#define ADT7462_REG_FAN2_MAX_ADDR 0xA9
|
|
#define ADT7462_REG_FAN_ENABLE 0x07
|
|
#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78
|
|
#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F
|
|
|
|
#define ADT7462_REG_CFG2 0x02
|
|
#define ADT7462_FSPD_MASK 0x20
|
|
|
|
#define ADT7462_REG_PWM_BASE_ADDR 0xAA
|
|
#define ADT7462_REG_PWM_MAX_ADDR 0xAD
|
|
#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28
|
|
#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B
|
|
#define ADT7462_REG_PWM_MAX 0x2C
|
|
#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C
|
|
#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F
|
|
#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60
|
|
#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63
|
|
#define ADT7462_PWM_HYST_MASK 0x0F
|
|
#define ADT7462_PWM_RANGE_MASK 0xF0
|
|
#define ADT7462_PWM_RANGE_SHIFT 4
|
|
#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21
|
|
#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24
|
|
#define ADT7462_PWM_CHANNEL_MASK 0xE0
|
|
#define ADT7462_PWM_CHANNEL_SHIFT 5
|
|
|
|
#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10
|
|
#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13
|
|
#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */
|
|
#define ADT7462_DIODE3_INPUT 0x20
|
|
#define ADT7462_DIODE1_INPUT 0x40
|
|
#define ADT7462_VID_INPUT 0x80
|
|
#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */
|
|
#define ADT7462_PIN21_INPUT 0x08
|
|
#define ADT7462_PIN19_INPUT 0x10
|
|
#define ADT7462_PIN15_INPUT 0x20
|
|
#define ADT7462_PIN13_INPUT 0x40
|
|
#define ADT7462_PIN8_INPUT 0x80
|
|
#define ADT7462_PIN23_MASK 0x03
|
|
#define ADT7462_PIN23_SHIFT 0
|
|
#define ADT7462_PIN26_MASK 0x0C /* cfg2 */
|
|
#define ADT7462_PIN26_SHIFT 2
|
|
#define ADT7462_PIN25_MASK 0x30
|
|
#define ADT7462_PIN25_SHIFT 4
|
|
#define ADT7462_PIN24_MASK 0xC0
|
|
#define ADT7462_PIN24_SHIFT 6
|
|
#define ADT7462_PIN26_VOLT_INPUT 0x08
|
|
#define ADT7462_PIN25_VOLT_INPUT 0x20
|
|
#define ADT7462_PIN28_SHIFT 4 /* cfg3 */
|
|
#define ADT7462_PIN28_VOLT 0x5
|
|
|
|
#define ADT7462_REG_ALARM1 0xB8
|
|
#define ADT7462_LT_ALARM 0x02
|
|
#define ADT7462_R1T_ALARM 0x04
|
|
#define ADT7462_R2T_ALARM 0x08
|
|
#define ADT7462_R3T_ALARM 0x10
|
|
#define ADT7462_REG_ALARM2 0xBB
|
|
#define ADT7462_V0_ALARM 0x01
|
|
#define ADT7462_V1_ALARM 0x02
|
|
#define ADT7462_V2_ALARM 0x04
|
|
#define ADT7462_V3_ALARM 0x08
|
|
#define ADT7462_V4_ALARM 0x10
|
|
#define ADT7462_V5_ALARM 0x20
|
|
#define ADT7462_V6_ALARM 0x40
|
|
#define ADT7462_V7_ALARM 0x80
|
|
#define ADT7462_REG_ALARM3 0xBC
|
|
#define ADT7462_V8_ALARM 0x08
|
|
#define ADT7462_V9_ALARM 0x10
|
|
#define ADT7462_V10_ALARM 0x20
|
|
#define ADT7462_V11_ALARM 0x40
|
|
#define ADT7462_V12_ALARM 0x80
|
|
#define ADT7462_REG_ALARM4 0xBD
|
|
#define ADT7462_F0_ALARM 0x01
|
|
#define ADT7462_F1_ALARM 0x02
|
|
#define ADT7462_F2_ALARM 0x04
|
|
#define ADT7462_F3_ALARM 0x08
|
|
#define ADT7462_F4_ALARM 0x10
|
|
#define ADT7462_F5_ALARM 0x20
|
|
#define ADT7462_F6_ALARM 0x40
|
|
#define ADT7462_F7_ALARM 0x80
|
|
#define ADT7462_ALARM1 0x0000
|
|
#define ADT7462_ALARM2 0x0100
|
|
#define ADT7462_ALARM3 0x0200
|
|
#define ADT7462_ALARM4 0x0300
|
|
#define ADT7462_ALARM_REG_SHIFT 8
|
|
#define ADT7462_ALARM_FLAG_MASK 0x0F
|
|
|
|
#define ADT7462_TEMP_COUNT 4
|
|
#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + ((x) * 2))
|
|
#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x))
|
|
#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x))
|
|
#define TEMP_FRAC_OFFSET 6
|
|
|
|
#define ADT7462_FAN_COUNT 8
|
|
#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x))
|
|
|
|
#define ADT7462_PWM_COUNT 4
|
|
#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x))
|
|
#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x))
|
|
#define ADT7462_REG_PWM_TMIN(x) \
|
|
(ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x))
|
|
#define ADT7462_REG_PWM_TRANGE(x) \
|
|
(ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x))
|
|
|
|
#define ADT7462_PIN_CFG_REG_COUNT 4
|
|
#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x))
|
|
#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x))
|
|
|
|
#define ADT7462_ALARM_REG_COUNT 4
|
|
|
|
/*
|
|
* The chip can measure 13 different voltage sources:
|
|
*
|
|
* 1. +12V1 (pin 7)
|
|
* 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23)
|
|
* 3. +12V3 (pin 22)
|
|
* 4. +5V (pin 21)
|
|
* 5. +1.25V/+0.9V (pin 19)
|
|
* 6. +2.5V/+1.8V (pin 15)
|
|
* 7. +3.3v (pin 13)
|
|
* 8. +12V2 (pin 8)
|
|
* 9. Vbatt/FSB_Vtt (pin 26)
|
|
* A. +3.3V/+1.2V1 (pin 25)
|
|
* B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24)
|
|
* C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V)
|
|
* D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V)
|
|
*
|
|
* Each of these 13 has a factor to convert raw to voltage. Even better,
|
|
* the pins can be connected to other sensors (tach/gpio/hot/etc), which
|
|
* makes the bookkeeping tricky.
|
|
*
|
|
* Some, but not all, of these voltages have low/high limits.
|
|
*/
|
|
#define ADT7462_VOLT_COUNT 13
|
|
|
|
#define ADT7462_VENDOR 0x41
|
|
#define ADT7462_DEVICE 0x62
|
|
/* datasheet only mentions a revision 4 */
|
|
#define ADT7462_REVISION 0x04
|
|
|
|
/* How often do we reread sensors values? (In jiffies) */
|
|
#define SENSOR_REFRESH_INTERVAL (2 * HZ)
|
|
|
|
/* How often do we reread sensor limit values? (In jiffies) */
|
|
#define LIMIT_REFRESH_INTERVAL (60 * HZ)
|
|
|
|
/* datasheet says to divide this number by the fan reading to get fan rpm */
|
|
#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x))
|
|
#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM
|
|
#define FAN_PERIOD_INVALID 65535
|
|
#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID)
|
|
|
|
#define MASK_AND_SHIFT(value, prefix) \
|
|
(((value) & prefix##_MASK) >> prefix##_SHIFT)
|
|
|
|
struct adt7462_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
char sensors_valid;
|
|
char limits_valid;
|
|
unsigned long sensors_last_updated; /* In jiffies */
|
|
unsigned long limits_last_updated; /* In jiffies */
|
|
|
|
u8 temp[ADT7462_TEMP_COUNT];
|
|
/* bits 6-7 are quarter pieces of temp */
|
|
u8 temp_frac[ADT7462_TEMP_COUNT];
|
|
u8 temp_min[ADT7462_TEMP_COUNT];
|
|
u8 temp_max[ADT7462_TEMP_COUNT];
|
|
u16 fan[ADT7462_FAN_COUNT];
|
|
u8 fan_enabled;
|
|
u8 fan_min[ADT7462_FAN_COUNT];
|
|
u8 cfg2;
|
|
u8 pwm[ADT7462_PWM_COUNT];
|
|
u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT];
|
|
u8 voltages[ADT7462_VOLT_COUNT];
|
|
u8 volt_max[ADT7462_VOLT_COUNT];
|
|
u8 volt_min[ADT7462_VOLT_COUNT];
|
|
u8 pwm_min[ADT7462_PWM_COUNT];
|
|
u8 pwm_tmin[ADT7462_PWM_COUNT];
|
|
u8 pwm_trange[ADT7462_PWM_COUNT];
|
|
u8 pwm_max; /* only one per chip */
|
|
u8 pwm_cfg[ADT7462_PWM_COUNT];
|
|
u8 alarms[ADT7462_ALARM_REG_COUNT];
|
|
};
|
|
|
|
/*
|
|
* 16-bit registers on the ADT7462 are low-byte first. The data sheet says
|
|
* that the low byte must be read before the high byte.
|
|
*/
|
|
static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg)
|
|
{
|
|
u16 foo;
|
|
foo = i2c_smbus_read_byte_data(client, reg);
|
|
foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
|
|
return foo;
|
|
}
|
|
|
|
/* For some reason these registers are not contiguous. */
|
|
static int ADT7462_REG_FAN(int fan)
|
|
{
|
|
if (fan < 4)
|
|
return ADT7462_REG_FAN_BASE_ADDR + (2 * fan);
|
|
return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4));
|
|
}
|
|
|
|
/* Voltage registers are scattered everywhere */
|
|
static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
|
|
return 0x7C;
|
|
break;
|
|
case 1:
|
|
return 0x69;
|
|
case 2:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
|
|
return 0x7F;
|
|
break;
|
|
case 3:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
|
|
return 0x7E;
|
|
break;
|
|
case 4:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
|
|
return 0x4B;
|
|
break;
|
|
case 5:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
|
|
return 0x49;
|
|
break;
|
|
case 6:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
|
|
return 0x68;
|
|
break;
|
|
case 7:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
|
|
return 0x7D;
|
|
break;
|
|
case 8:
|
|
if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
|
|
return 0x6C;
|
|
break;
|
|
case 9:
|
|
if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
|
|
return 0x6B;
|
|
break;
|
|
case 10:
|
|
return 0x6A;
|
|
case 11:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 0x50;
|
|
break;
|
|
case 12:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 0x4C;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
|
|
return 0x6D;
|
|
break;
|
|
case 1:
|
|
return 0x72;
|
|
case 2:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
|
|
return 0x6F;
|
|
break;
|
|
case 3:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
|
|
return 0x71;
|
|
break;
|
|
case 4:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
|
|
return 0x47;
|
|
break;
|
|
case 5:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
|
|
return 0x45;
|
|
break;
|
|
case 6:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
|
|
return 0x70;
|
|
break;
|
|
case 7:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
|
|
return 0x6E;
|
|
break;
|
|
case 8:
|
|
if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
|
|
return 0x75;
|
|
break;
|
|
case 9:
|
|
if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
|
|
return 0x74;
|
|
break;
|
|
case 10:
|
|
return 0x73;
|
|
case 11:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 0x76;
|
|
break;
|
|
case 12:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 0x77;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ADT7462_REG_VOLT(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
|
|
return 0xA3;
|
|
break;
|
|
case 1:
|
|
return 0x90;
|
|
case 2:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
|
|
return 0xA9;
|
|
break;
|
|
case 3:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
|
|
return 0xA7;
|
|
break;
|
|
case 4:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
|
|
return 0x8F;
|
|
break;
|
|
case 5:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
|
|
return 0x8B;
|
|
break;
|
|
case 6:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
|
|
return 0x96;
|
|
break;
|
|
case 7:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
|
|
return 0xA5;
|
|
break;
|
|
case 8:
|
|
if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
|
|
return 0x93;
|
|
break;
|
|
case 9:
|
|
if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
|
|
return 0x92;
|
|
break;
|
|
case 10:
|
|
return 0x91;
|
|
case 11:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 0x94;
|
|
break;
|
|
case 12:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 0x95;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Provide labels for sysfs */
|
|
static const char *voltage_label(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
|
|
return "+12V1";
|
|
break;
|
|
case 1:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
|
|
case 0:
|
|
return "Vccp1";
|
|
case 1:
|
|
return "+2.5V";
|
|
case 2:
|
|
return "+1.8V";
|
|
case 3:
|
|
return "+1.5V";
|
|
}
|
|
fallthrough;
|
|
case 2:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
|
|
return "+12V3";
|
|
break;
|
|
case 3:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
|
|
return "+5V";
|
|
break;
|
|
case 4:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
|
|
if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
|
|
return "+0.9V";
|
|
return "+1.25V";
|
|
}
|
|
break;
|
|
case 5:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
|
|
if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
|
|
return "+1.8V";
|
|
return "+2.5V";
|
|
}
|
|
break;
|
|
case 6:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
|
|
return "+3.3V";
|
|
break;
|
|
case 7:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
|
|
return "+12V2";
|
|
break;
|
|
case 8:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
|
|
case 0:
|
|
return "Vbatt";
|
|
case 1:
|
|
return "FSB_Vtt";
|
|
}
|
|
break;
|
|
case 9:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
|
|
case 0:
|
|
return "+3.3V";
|
|
case 1:
|
|
return "+1.2V1";
|
|
}
|
|
break;
|
|
case 10:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
|
|
case 0:
|
|
return "Vccp2";
|
|
case 1:
|
|
return "+2.5V";
|
|
case 2:
|
|
return "+1.8V";
|
|
case 3:
|
|
return "+1.5";
|
|
}
|
|
fallthrough;
|
|
case 11:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return "+1.5V ICH";
|
|
break;
|
|
case 12:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return "+1.5V 3GPIO";
|
|
break;
|
|
}
|
|
return "N/A";
|
|
}
|
|
|
|
/* Multipliers are actually in uV, not mV. */
|
|
static int voltage_multiplier(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
|
|
return 62500;
|
|
break;
|
|
case 1:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
|
|
case 0:
|
|
if (data->pin_cfg[0] & ADT7462_VID_INPUT)
|
|
return 12500;
|
|
return 6250;
|
|
case 1:
|
|
return 13000;
|
|
case 2:
|
|
return 9400;
|
|
case 3:
|
|
return 7800;
|
|
}
|
|
fallthrough;
|
|
case 2:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
|
|
return 62500;
|
|
break;
|
|
case 3:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
|
|
return 26000;
|
|
break;
|
|
case 4:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
|
|
if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
|
|
return 4690;
|
|
return 6500;
|
|
}
|
|
break;
|
|
case 5:
|
|
if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
|
|
if (data->pin_cfg[1] & ADT7462_PIN15_INPUT)
|
|
return 9400;
|
|
return 13000;
|
|
}
|
|
break;
|
|
case 6:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
|
|
return 17200;
|
|
break;
|
|
case 7:
|
|
if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
|
|
return 62500;
|
|
break;
|
|
case 8:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
|
|
case 0:
|
|
return 15600;
|
|
case 1:
|
|
return 6250;
|
|
}
|
|
break;
|
|
case 9:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
|
|
case 0:
|
|
return 17200;
|
|
case 1:
|
|
return 6250;
|
|
}
|
|
break;
|
|
case 10:
|
|
switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
|
|
case 0:
|
|
return 6250;
|
|
case 1:
|
|
return 13000;
|
|
case 2:
|
|
return 9400;
|
|
case 3:
|
|
return 7800;
|
|
}
|
|
fallthrough;
|
|
case 11:
|
|
case 12:
|
|
if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
|
|
ADT7462_PIN28_VOLT &&
|
|
!(data->pin_cfg[0] & ADT7462_VID_INPUT))
|
|
return 7800;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int temp_enabled(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
case 2:
|
|
return 1;
|
|
case 1:
|
|
if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
|
|
return 1;
|
|
break;
|
|
case 3:
|
|
if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
|
|
return 1;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const char *temp_label(struct adt7462_data *data, int which)
|
|
{
|
|
switch (which) {
|
|
case 0:
|
|
return "local";
|
|
case 1:
|
|
if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
|
|
return "remote1";
|
|
break;
|
|
case 2:
|
|
return "remote2";
|
|
case 3:
|
|
if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
|
|
return "remote3";
|
|
break;
|
|
}
|
|
return "N/A";
|
|
}
|
|
|
|
/* Map Trange register values to mC */
|
|
#define NUM_TRANGE_VALUES 16
|
|
static const int trange_values[NUM_TRANGE_VALUES] = {
|
|
2000,
|
|
2500,
|
|
3300,
|
|
4000,
|
|
5000,
|
|
6700,
|
|
8000,
|
|
10000,
|
|
13300,
|
|
16000,
|
|
20000,
|
|
26700,
|
|
32000,
|
|
40000,
|
|
53300,
|
|
80000
|
|
};
|
|
|
|
static int find_trange_value(int trange)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_TRANGE_VALUES; i++)
|
|
if (trange_values[i] == trange)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct adt7462_data *adt7462_update_device(struct device *dev)
|
|
{
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
unsigned long local_jiffies = jiffies;
|
|
int i;
|
|
|
|
mutex_lock(&data->lock);
|
|
if (time_before(local_jiffies, data->sensors_last_updated +
|
|
SENSOR_REFRESH_INTERVAL)
|
|
&& data->sensors_valid)
|
|
goto no_sensor_update;
|
|
|
|
for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
|
|
/*
|
|
* Reading the fractional register locks the integral
|
|
* register until both have been read.
|
|
*/
|
|
data->temp_frac[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_TEMP_REG(i));
|
|
data->temp[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_TEMP_REG(i) + 1);
|
|
}
|
|
|
|
for (i = 0; i < ADT7462_FAN_COUNT; i++)
|
|
data->fan[i] = adt7462_read_word_data(client,
|
|
ADT7462_REG_FAN(i));
|
|
|
|
data->fan_enabled = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_FAN_ENABLE);
|
|
|
|
for (i = 0; i < ADT7462_PWM_COUNT; i++)
|
|
data->pwm[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_PWM(i));
|
|
|
|
for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++)
|
|
data->pin_cfg[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_PIN_CFG(i));
|
|
|
|
for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
|
|
int reg = ADT7462_REG_VOLT(data, i);
|
|
if (!reg)
|
|
data->voltages[i] = 0;
|
|
else
|
|
data->voltages[i] = i2c_smbus_read_byte_data(client,
|
|
reg);
|
|
}
|
|
|
|
data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1);
|
|
data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2);
|
|
data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3);
|
|
data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4);
|
|
|
|
data->sensors_last_updated = local_jiffies;
|
|
data->sensors_valid = 1;
|
|
|
|
no_sensor_update:
|
|
if (time_before(local_jiffies, data->limits_last_updated +
|
|
LIMIT_REFRESH_INTERVAL)
|
|
&& data->limits_valid)
|
|
goto out;
|
|
|
|
for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
|
|
data->temp_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_TEMP_MIN_REG(i));
|
|
data->temp_max[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_TEMP_MAX_REG(i));
|
|
}
|
|
|
|
for (i = 0; i < ADT7462_FAN_COUNT; i++)
|
|
data->fan_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_FAN_MIN(i));
|
|
|
|
for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
|
|
int reg = ADT7462_REG_VOLT_MAX(data, i);
|
|
data->volt_max[i] =
|
|
(reg ? i2c_smbus_read_byte_data(client, reg) : 0);
|
|
|
|
reg = ADT7462_REG_VOLT_MIN(data, i);
|
|
data->volt_min[i] =
|
|
(reg ? i2c_smbus_read_byte_data(client, reg) : 0);
|
|
}
|
|
|
|
for (i = 0; i < ADT7462_PWM_COUNT; i++) {
|
|
data->pwm_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_PWM_MIN(i));
|
|
data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_PWM_TMIN(i));
|
|
data->pwm_trange[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_PWM_TRANGE(i));
|
|
data->pwm_cfg[i] = i2c_smbus_read_byte_data(client,
|
|
ADT7462_REG_PWM_CFG(i));
|
|
}
|
|
|
|
data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX);
|
|
|
|
data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
|
|
|
|
data->limits_last_updated = local_jiffies;
|
|
data->limits_valid = 1;
|
|
|
|
out:
|
|
mutex_unlock(&data->lock);
|
|
return data;
|
|
}
|
|
|
|
static ssize_t temp_min_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
|
|
if (!temp_enabled(data, attr->index))
|
|
return sprintf(buf, "0\n");
|
|
|
|
return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64));
|
|
}
|
|
|
|
static ssize_t temp_min_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, -64000, 191000);
|
|
temp = DIV_ROUND_CLOSEST(temp, 1000) + 64;
|
|
|
|
mutex_lock(&data->lock);
|
|
data->temp_min[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t temp_max_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
|
|
if (!temp_enabled(data, attr->index))
|
|
return sprintf(buf, "0\n");
|
|
|
|
return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64));
|
|
}
|
|
|
|
static ssize_t temp_max_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, -64000, 191000);
|
|
temp = DIV_ROUND_CLOSEST(temp, 1000) + 64;
|
|
|
|
mutex_lock(&data->lock);
|
|
data->temp_max[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET;
|
|
|
|
if (!temp_enabled(data, attr->index))
|
|
return sprintf(buf, "0\n");
|
|
|
|
return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) +
|
|
250 * frac);
|
|
}
|
|
|
|
static ssize_t temp_label_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
|
|
return sprintf(buf, "%s\n", temp_label(data, attr->index));
|
|
}
|
|
|
|
static ssize_t volt_max_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
int x = voltage_multiplier(data, attr->index);
|
|
|
|
x *= data->volt_max[attr->index];
|
|
x /= 1000; /* convert from uV to mV */
|
|
|
|
return sprintf(buf, "%d\n", x);
|
|
}
|
|
|
|
static ssize_t volt_max_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int x = voltage_multiplier(data, attr->index);
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp) || !x)
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, 0, 255 * x / 1000);
|
|
temp *= 1000; /* convert mV to uV */
|
|
temp = DIV_ROUND_CLOSEST(temp, x);
|
|
|
|
mutex_lock(&data->lock);
|
|
data->volt_max[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client,
|
|
ADT7462_REG_VOLT_MAX(data, attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t volt_min_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
int x = voltage_multiplier(data, attr->index);
|
|
|
|
x *= data->volt_min[attr->index];
|
|
x /= 1000; /* convert from uV to mV */
|
|
|
|
return sprintf(buf, "%d\n", x);
|
|
}
|
|
|
|
static ssize_t volt_min_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int x = voltage_multiplier(data, attr->index);
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp) || !x)
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, 0, 255 * x / 1000);
|
|
temp *= 1000; /* convert mV to uV */
|
|
temp = DIV_ROUND_CLOSEST(temp, x);
|
|
|
|
mutex_lock(&data->lock);
|
|
data->volt_min[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client,
|
|
ADT7462_REG_VOLT_MIN(data, attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t voltage_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
int x = voltage_multiplier(data, attr->index);
|
|
|
|
x *= data->voltages[attr->index];
|
|
x /= 1000; /* convert from uV to mV */
|
|
|
|
return sprintf(buf, "%d\n", x);
|
|
}
|
|
|
|
static ssize_t voltage_label_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
|
|
return sprintf(buf, "%s\n", voltage_label(data, attr->index));
|
|
}
|
|
|
|
static ssize_t alarm_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
int reg = attr->index >> ADT7462_ALARM_REG_SHIFT;
|
|
int mask = attr->index & ADT7462_ALARM_FLAG_MASK;
|
|
|
|
if (data->alarms[reg] & mask)
|
|
return sprintf(buf, "1\n");
|
|
else
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
|
|
static int fan_enabled(struct adt7462_data *data, int fan)
|
|
{
|
|
return data->fan_enabled & (1 << fan);
|
|
}
|
|
|
|
static ssize_t fan_min_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
u16 temp;
|
|
|
|
/* Only the MSB of the min fan period is stored... */
|
|
temp = data->fan_min[attr->index];
|
|
temp <<= 8;
|
|
|
|
if (!fan_enabled(data, attr->index) ||
|
|
!FAN_DATA_VALID(temp))
|
|
return sprintf(buf, "0\n");
|
|
|
|
return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp));
|
|
}
|
|
|
|
static ssize_t fan_min_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp) || !temp ||
|
|
!fan_enabled(data, attr->index))
|
|
return -EINVAL;
|
|
|
|
temp = FAN_RPM_TO_PERIOD(temp);
|
|
temp >>= 8;
|
|
temp = clamp_val(temp, 1, 255);
|
|
|
|
mutex_lock(&data->lock);
|
|
data->fan_min[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
|
|
if (!fan_enabled(data, attr->index) ||
|
|
!FAN_DATA_VALID(data->fan[attr->index]))
|
|
return sprintf(buf, "0\n");
|
|
|
|
return sprintf(buf, "%d\n",
|
|
FAN_PERIOD_TO_RPM(data->fan[attr->index]));
|
|
}
|
|
|
|
static ssize_t force_pwm_max_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0));
|
|
}
|
|
|
|
static ssize_t force_pwm_max_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
u8 reg;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->lock);
|
|
reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
|
|
if (temp)
|
|
reg |= ADT7462_FSPD_MASK;
|
|
else
|
|
reg &= ~ADT7462_FSPD_MASK;
|
|
data->cfg2 = reg;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->pwm[attr->index]);
|
|
}
|
|
|
|
static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, 0, 255);
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_max_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->pwm_max);
|
|
}
|
|
|
|
static ssize_t pwm_max_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, 0, 255);
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm_max = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_min_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
|
|
}
|
|
|
|
static ssize_t pwm_min_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, 0, 255);
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm_min[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_hyst_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
return sprintf(buf, "%d\n", 1000 *
|
|
(data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK));
|
|
}
|
|
|
|
static ssize_t pwm_hyst_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, 0, 15000);
|
|
temp = DIV_ROUND_CLOSEST(temp, 1000);
|
|
|
|
/* package things up */
|
|
temp &= ADT7462_PWM_HYST_MASK;
|
|
temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK;
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm_trange[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_tmax_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
|
|
/* tmax = tmin + trange */
|
|
int trange = trange_values[data->pwm_trange[attr->index] >>
|
|
ADT7462_PWM_RANGE_SHIFT];
|
|
int tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
|
|
|
|
return sprintf(buf, "%d\n", tmin + trange);
|
|
}
|
|
|
|
static ssize_t pwm_tmax_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int temp;
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int tmin, trange_value;
|
|
long trange;
|
|
|
|
if (kstrtol(buf, 10, &trange))
|
|
return -EINVAL;
|
|
|
|
/* trange = tmax - tmin */
|
|
tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
|
|
trange_value = find_trange_value(trange - tmin);
|
|
if (trange_value < 0)
|
|
return trange_value;
|
|
|
|
temp = trange_value << ADT7462_PWM_RANGE_SHIFT;
|
|
temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK;
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm_trange[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_tmin_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64));
|
|
}
|
|
|
|
static ssize_t pwm_tmin_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
temp = clamp_val(temp, -64000, 191000);
|
|
temp = DIV_ROUND_CLOSEST(temp, 1000) + 64;
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm_tmin[attr->index] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index),
|
|
temp);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pwm_auto_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
|
|
|
|
switch (cfg) {
|
|
case 4: /* off */
|
|
return sprintf(buf, "0\n");
|
|
case 7: /* manual */
|
|
return sprintf(buf, "1\n");
|
|
default: /* automatic */
|
|
return sprintf(buf, "2\n");
|
|
}
|
|
}
|
|
|
|
static void set_pwm_channel(struct i2c_client *client,
|
|
struct adt7462_data *data,
|
|
int which,
|
|
int value)
|
|
{
|
|
int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK;
|
|
temp |= value << ADT7462_PWM_CHANNEL_SHIFT;
|
|
|
|
mutex_lock(&data->lock);
|
|
data->pwm_cfg[which] = temp;
|
|
i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp);
|
|
mutex_unlock(&data->lock);
|
|
}
|
|
|
|
static ssize_t pwm_auto_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
switch (temp) {
|
|
case 0: /* off */
|
|
set_pwm_channel(client, data, attr->index, 4);
|
|
return count;
|
|
case 1: /* manual */
|
|
set_pwm_channel(client, data, attr->index, 7);
|
|
return count;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static ssize_t pwm_auto_temp_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = adt7462_update_device(dev);
|
|
int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
|
|
|
|
switch (channel) {
|
|
case 0: /* temp[1234] only */
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
return sprintf(buf, "%d\n", (1 << channel));
|
|
case 5: /* temp1 & temp4 */
|
|
return sprintf(buf, "9\n");
|
|
case 6:
|
|
return sprintf(buf, "15\n");
|
|
default:
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
}
|
|
|
|
static int cvt_auto_temp(int input)
|
|
{
|
|
if (input == 0xF)
|
|
return 6;
|
|
if (input == 0x9)
|
|
return 5;
|
|
if (input < 1 || !is_power_of_2(input))
|
|
return -EINVAL;
|
|
return ilog2(input);
|
|
}
|
|
|
|
static ssize_t pwm_auto_temp_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct adt7462_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long temp;
|
|
|
|
if (kstrtol(buf, 10, &temp))
|
|
return -EINVAL;
|
|
|
|
temp = cvt_auto_temp(temp);
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
set_pwm_channel(client, data, attr->index, temp);
|
|
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_min, temp_min, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_label, temp_label, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_label, temp_label, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(temp3_label, temp_label, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(temp4_label, temp_label, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm,
|
|
ADT7462_ALARM1 | ADT7462_LT_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm,
|
|
ADT7462_ALARM1 | ADT7462_R1T_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm,
|
|
ADT7462_ALARM1 | ADT7462_R2T_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(temp4_alarm, alarm,
|
|
ADT7462_ALARM1 | ADT7462_R3T_ALARM);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(in1_max, volt_max, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_max, volt_max, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_max, volt_max, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in4_max, volt_max, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(in5_max, volt_max, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(in6_max, volt_max, 5);
|
|
static SENSOR_DEVICE_ATTR_RW(in7_max, volt_max, 6);
|
|
static SENSOR_DEVICE_ATTR_RW(in8_max, volt_max, 7);
|
|
static SENSOR_DEVICE_ATTR_RW(in9_max, volt_max, 8);
|
|
static SENSOR_DEVICE_ATTR_RW(in10_max, volt_max, 9);
|
|
static SENSOR_DEVICE_ATTR_RW(in11_max, volt_max, 10);
|
|
static SENSOR_DEVICE_ATTR_RW(in12_max, volt_max, 11);
|
|
static SENSOR_DEVICE_ATTR_RW(in13_max, volt_max, 12);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(in1_min, volt_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_min, volt_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_min, volt_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in4_min, volt_min, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(in5_min, volt_min, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(in6_min, volt_min, 5);
|
|
static SENSOR_DEVICE_ATTR_RW(in7_min, volt_min, 6);
|
|
static SENSOR_DEVICE_ATTR_RW(in8_min, volt_min, 7);
|
|
static SENSOR_DEVICE_ATTR_RW(in9_min, volt_min, 8);
|
|
static SENSOR_DEVICE_ATTR_RW(in10_min, volt_min, 9);
|
|
static SENSOR_DEVICE_ATTR_RW(in11_min, volt_min, 10);
|
|
static SENSOR_DEVICE_ATTR_RW(in12_min, volt_min, 11);
|
|
static SENSOR_DEVICE_ATTR_RW(in13_min, volt_min, 12);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(in1_input, voltage, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_input, voltage, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_input, voltage, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_input, voltage, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(in5_input, voltage, 4);
|
|
static SENSOR_DEVICE_ATTR_RO(in6_input, voltage, 5);
|
|
static SENSOR_DEVICE_ATTR_RO(in7_input, voltage, 6);
|
|
static SENSOR_DEVICE_ATTR_RO(in8_input, voltage, 7);
|
|
static SENSOR_DEVICE_ATTR_RO(in9_input, voltage, 8);
|
|
static SENSOR_DEVICE_ATTR_RO(in10_input, voltage, 9);
|
|
static SENSOR_DEVICE_ATTR_RO(in11_input, voltage, 10);
|
|
static SENSOR_DEVICE_ATTR_RO(in12_input, voltage, 11);
|
|
static SENSOR_DEVICE_ATTR_RO(in13_input, voltage, 12);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(in1_label, voltage_label, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_label, voltage_label, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_label, voltage_label, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_label, voltage_label, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(in5_label, voltage_label, 4);
|
|
static SENSOR_DEVICE_ATTR_RO(in6_label, voltage_label, 5);
|
|
static SENSOR_DEVICE_ATTR_RO(in7_label, voltage_label, 6);
|
|
static SENSOR_DEVICE_ATTR_RO(in8_label, voltage_label, 7);
|
|
static SENSOR_DEVICE_ATTR_RO(in9_label, voltage_label, 8);
|
|
static SENSOR_DEVICE_ATTR_RO(in10_label, voltage_label, 9);
|
|
static SENSOR_DEVICE_ATTR_RO(in11_label, voltage_label, 10);
|
|
static SENSOR_DEVICE_ATTR_RO(in12_label, voltage_label, 11);
|
|
static SENSOR_DEVICE_ATTR_RO(in13_label, voltage_label, 12);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V0_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V7_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V2_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V6_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V5_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V4_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V3_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in8_alarm, alarm,
|
|
ADT7462_ALARM2 | ADT7462_V1_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in9_alarm, alarm,
|
|
ADT7462_ALARM3 | ADT7462_V10_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in10_alarm, alarm,
|
|
ADT7462_ALARM3 | ADT7462_V9_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in11_alarm, alarm,
|
|
ADT7462_ALARM3 | ADT7462_V8_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in12_alarm, alarm,
|
|
ADT7462_ALARM3 | ADT7462_V11_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(in13_alarm, alarm,
|
|
ADT7462_ALARM3 | ADT7462_V12_ALARM);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(fan5_min, fan_min, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(fan6_min, fan_min, 5);
|
|
static SENSOR_DEVICE_ATTR_RW(fan7_min, fan_min, 6);
|
|
static SENSOR_DEVICE_ATTR_RW(fan8_min, fan_min, 7);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(fan5_input, fan, 4);
|
|
static SENSOR_DEVICE_ATTR_RO(fan6_input, fan, 5);
|
|
static SENSOR_DEVICE_ATTR_RO(fan7_input, fan, 6);
|
|
static SENSOR_DEVICE_ATTR_RO(fan8_input, fan, 7);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F0_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F1_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F2_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F3_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan5_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F4_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan6_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F5_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan7_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F6_ALARM);
|
|
static SENSOR_DEVICE_ATTR_RO(fan8_alarm, alarm,
|
|
ADT7462_ALARM4 | ADT7462_F7_ALARM);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm4, pwm, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_pwm, pwm_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_pwm, pwm_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point1_pwm, pwm_min, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm_max, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point2_pwm, pwm_max, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point2_pwm, pwm_max, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point2_pwm, pwm_max, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_auto_point1_hyst, pwm_hyst, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_auto_point1_hyst, pwm_hyst, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_auto_point1_hyst, pwm_hyst, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_auto_point1_hyst, pwm_hyst, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_auto_point2_hyst, pwm_hyst, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_auto_point2_hyst, pwm_hyst, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_auto_point2_hyst, pwm_hyst, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_auto_point2_hyst, pwm_hyst, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_auto_point1_temp, pwm_tmin, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_auto_point1_temp, pwm_tmin, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_auto_point1_temp, pwm_tmin, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_auto_point1_temp, pwm_tmin, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_auto_point2_temp, pwm_tmax, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_auto_point2_temp, pwm_tmax, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_auto_point2_temp, pwm_tmax, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_auto_point2_temp, pwm_tmax, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_auto, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_auto, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_auto, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm4_enable, pwm_auto, 3);
|
|
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels_temp, pwm_auto_temp, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels_temp, pwm_auto_temp, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels_temp, pwm_auto_temp, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm4_auto_channels_temp, pwm_auto_temp, 3);
|
|
|
|
static struct attribute *adt7462_attrs[] = {
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_max.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_min.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_label.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_label.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_label.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_label.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in3_max.dev_attr.attr,
|
|
&sensor_dev_attr_in4_max.dev_attr.attr,
|
|
&sensor_dev_attr_in5_max.dev_attr.attr,
|
|
&sensor_dev_attr_in6_max.dev_attr.attr,
|
|
&sensor_dev_attr_in7_max.dev_attr.attr,
|
|
&sensor_dev_attr_in8_max.dev_attr.attr,
|
|
&sensor_dev_attr_in9_max.dev_attr.attr,
|
|
&sensor_dev_attr_in10_max.dev_attr.attr,
|
|
&sensor_dev_attr_in11_max.dev_attr.attr,
|
|
&sensor_dev_attr_in12_max.dev_attr.attr,
|
|
&sensor_dev_attr_in13_max.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in3_min.dev_attr.attr,
|
|
&sensor_dev_attr_in4_min.dev_attr.attr,
|
|
&sensor_dev_attr_in5_min.dev_attr.attr,
|
|
&sensor_dev_attr_in6_min.dev_attr.attr,
|
|
&sensor_dev_attr_in7_min.dev_attr.attr,
|
|
&sensor_dev_attr_in8_min.dev_attr.attr,
|
|
&sensor_dev_attr_in9_min.dev_attr.attr,
|
|
&sensor_dev_attr_in10_min.dev_attr.attr,
|
|
&sensor_dev_attr_in11_min.dev_attr.attr,
|
|
&sensor_dev_attr_in12_min.dev_attr.attr,
|
|
&sensor_dev_attr_in13_min.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
&sensor_dev_attr_in7_input.dev_attr.attr,
|
|
&sensor_dev_attr_in8_input.dev_attr.attr,
|
|
&sensor_dev_attr_in9_input.dev_attr.attr,
|
|
&sensor_dev_attr_in10_input.dev_attr.attr,
|
|
&sensor_dev_attr_in11_input.dev_attr.attr,
|
|
&sensor_dev_attr_in12_input.dev_attr.attr,
|
|
&sensor_dev_attr_in13_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_label.dev_attr.attr,
|
|
&sensor_dev_attr_in2_label.dev_attr.attr,
|
|
&sensor_dev_attr_in3_label.dev_attr.attr,
|
|
&sensor_dev_attr_in4_label.dev_attr.attr,
|
|
&sensor_dev_attr_in5_label.dev_attr.attr,
|
|
&sensor_dev_attr_in6_label.dev_attr.attr,
|
|
&sensor_dev_attr_in7_label.dev_attr.attr,
|
|
&sensor_dev_attr_in8_label.dev_attr.attr,
|
|
&sensor_dev_attr_in9_label.dev_attr.attr,
|
|
&sensor_dev_attr_in10_label.dev_attr.attr,
|
|
&sensor_dev_attr_in11_label.dev_attr.attr,
|
|
&sensor_dev_attr_in12_label.dev_attr.attr,
|
|
&sensor_dev_attr_in13_label.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in5_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in6_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in7_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in8_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in9_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in10_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in11_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in12_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in13_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan7_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan8_min.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan7_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan8_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan5_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan6_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan7_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan8_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_force_pwm_max.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4_enable.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
ATTRIBUTE_GROUPS(adt7462);
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int adt7462_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int vendor, device, revision;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
|
|
if (vendor != ADT7462_VENDOR)
|
|
return -ENODEV;
|
|
|
|
device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
|
|
if (device != ADT7462_DEVICE)
|
|
return -ENODEV;
|
|
|
|
revision = i2c_smbus_read_byte_data(client, ADT7462_REG_REVISION);
|
|
if (revision != ADT7462_REVISION)
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adt7462_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct adt7462_data *data;
|
|
struct device *hwmon_dev;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct adt7462_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
|
|
dev_info(&client->dev, "%s chip found\n", client->name);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
|
data,
|
|
adt7462_groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id adt7462_id[] = {
|
|
{ "adt7462", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adt7462_id);
|
|
|
|
static struct i2c_driver adt7462_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "adt7462",
|
|
},
|
|
.probe_new = adt7462_probe,
|
|
.id_table = adt7462_id,
|
|
.detect = adt7462_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(adt7462_driver);
|
|
|
|
MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
|
|
MODULE_DESCRIPTION("ADT7462 driver");
|
|
MODULE_LICENSE("GPL");
|