kernel_optimize_test/arch/mips/bcm47xx
Edward Matijević 42374b94d7
MIPS: BCM47XX: Add support for Netgear R6200 V1
The Netgear R6200 v1 uses a BCM4718A1 SOC and a BCM4352/BCM4360 for 5GHz
wireless. This patch adds support for detecting this model board and
registers the 3 buttons.

I have tested that the device can boot kernels 4.14 and 4.19 under
OpenWRT.

There is one issue that the LEDs on the device are controlled by a
74HC164 that uses bit-banging instead of SPI so it isn't accessible to
the kernel without adding a workaround. Without any workaround the
device on boot will flash all LEDs once then the power LED will remain
amber as all other LEDs stay off.

Signed-off-by: Edward Matijevic <motolav@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
[paul.burton@mips.com:
  - Sort bcm47xx_board_list_board_id alphabetically by board type.
  - Fix whitespace.
  - Wrap commit message & drop OpenWRT-based justification for
    bcm47xx_board_list_board_id being mis-sorted.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-07-25 22:10:05 -07:00
..
bcm47xx_private.h
board.c MIPS: BCM47XX: Add support for Netgear R6200 V1 2019-07-25 22:10:05 -07:00
buttons.c MIPS: BCM47XX: Add support for Netgear R6200 V1 2019-07-25 22:10:05 -07:00
irq.c
Kconfig arch: mips: Kconfig: pedantic formatting 2019-03-19 15:34:04 -07:00
leds.c MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support 2019-02-11 13:29:33 -08:00
Makefile treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Platform
prom.c
serial.c
setup.c net: phy: fixed-phy: Drop GPIO from fixed_phy_add() 2019-02-04 18:33:36 -08:00
time.c
workarounds.c mips: bcm47xx: Enable USB power on Netgear WNDR3400v2 2019-03-11 15:34:17 -07:00