forked from luck/tmp_suning_uos_patched
0b84b5ca43
This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
358 lines
8.1 KiB
C
358 lines
8.1 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-palmtt.c
|
|
*
|
|
* Modified from board-palmtt2.c
|
|
*
|
|
* Modified and amended for Palm Tungsten|T
|
|
* by Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/leds.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <mach/led.h>
|
|
#include <mach/mcbsp.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/mux.h>
|
|
#include <mach/usb.h>
|
|
#include <mach/dma.h>
|
|
#include <mach/tc.h>
|
|
#include <mach/board.h>
|
|
#include <mach/irda.h>
|
|
#include <mach/keypad.h>
|
|
#include <mach/common.h>
|
|
#include <mach/omap-alsa.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/ads7846.h>
|
|
|
|
static int palmtt_keymap[] = {
|
|
KEY(0, 0, KEY_ESC),
|
|
KEY(0, 1, KEY_SPACE),
|
|
KEY(0, 2, KEY_LEFTCTRL),
|
|
KEY(0, 3, KEY_TAB),
|
|
KEY(0, 4, KEY_ENTER),
|
|
KEY(1, 0, KEY_LEFT),
|
|
KEY(1, 1, KEY_DOWN),
|
|
KEY(1, 2, KEY_UP),
|
|
KEY(1, 3, KEY_RIGHT),
|
|
KEY(2, 0, KEY_SLEEP),
|
|
KEY(2, 4, KEY_Y),
|
|
0
|
|
};
|
|
|
|
static struct mtd_partition palmtt_partitions[] = {
|
|
{
|
|
.name = "write8k",
|
|
.offset = 0,
|
|
.size = SZ_8K,
|
|
.mask_flags = 0,
|
|
},
|
|
{
|
|
.name = "PalmOS-BootLoader(ro)",
|
|
.offset = SZ_8K,
|
|
.size = 7 * SZ_8K,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "u-boot",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 8 * SZ_8K,
|
|
.mask_flags = 0,
|
|
},
|
|
{
|
|
.name = "PalmOS-FS(ro)",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "u-boot(rez)",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = 0
|
|
},
|
|
{
|
|
.name = "empty",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data palmtt_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 2,
|
|
.parts = palmtt_partitions,
|
|
.nr_parts = ARRAY_SIZE(palmtt_partitions),
|
|
};
|
|
|
|
static struct resource palmtt_flash_resource = {
|
|
.start = OMAP_CS0_PHYS,
|
|
.end = OMAP_CS0_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device palmtt_flash_device = {
|
|
.name = "omapflash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &palmtt_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &palmtt_flash_resource,
|
|
};
|
|
|
|
#define DEFAULT_BITPERSAMPLE 16
|
|
|
|
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
|
|
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
|
|
.spcr1 = RINTM(3) | RRST,
|
|
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
|
|
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
|
|
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
|
|
RWDLEN1(OMAP_MCBSP_WORD_16),
|
|
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
|
|
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
|
|
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
|
|
XWDLEN1(OMAP_MCBSP_WORD_16),
|
|
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
|
|
.srgr2 = GSYNC | CLKSP | FSGM |
|
|
FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
|
|
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
|
|
};
|
|
|
|
static struct omap_alsa_codec_config alsa_config = {
|
|
.name = "PalmTT AIC23",
|
|
.mcbsp_regs_alsa = &mcbsp_regs,
|
|
.codec_configure_dev = NULL, /* aic23_configure, */
|
|
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
|
|
.codec_clock_setup = NULL, /* aic23_clock_setup, */
|
|
.codec_clock_on = NULL, /* aic23_clock_on, */
|
|
.codec_clock_off = NULL, /* aic23_clock_off, */
|
|
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
|
|
};
|
|
|
|
static struct platform_device palmtt_mcbsp1_device = {
|
|
.name = "omap_alsa_mcbsp",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &alsa_config,
|
|
},
|
|
};
|
|
|
|
static struct resource palmtt_kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_KEYBOARD,
|
|
.end = INT_KEYBOARD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct omap_kp_platform_data palmtt_kp_data = {
|
|
.rows = 6,
|
|
.cols = 3,
|
|
.keymap = palmtt_keymap,
|
|
};
|
|
|
|
static struct platform_device palmtt_kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmtt_kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(palmtt_kp_resources),
|
|
.resource = palmtt_kp_resources,
|
|
};
|
|
|
|
static struct platform_device palmtt_lcd_device = {
|
|
.name = "lcd_palmtt",
|
|
.id = -1,
|
|
};
|
|
static struct omap_irda_config palmtt_irda_config = {
|
|
.transceiver_cap = IR_SIRMODE,
|
|
.rx_channel = OMAP_DMA_UART3_RX,
|
|
.tx_channel = OMAP_DMA_UART3_TX,
|
|
.dest_start = UART3_THR,
|
|
.src_start = UART3_RHR,
|
|
.tx_trigger = 0,
|
|
.rx_trigger = 0,
|
|
};
|
|
|
|
static struct resource palmtt_irda_resources[] = {
|
|
[0] = {
|
|
.start = INT_UART3,
|
|
.end = INT_UART3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device palmtt_irda_device = {
|
|
.name = "omapirda",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmtt_irda_config,
|
|
},
|
|
.num_resources = ARRAY_SIZE(palmtt_irda_resources),
|
|
.resource = palmtt_irda_resources,
|
|
};
|
|
|
|
static struct platform_device palmtt_spi_device = {
|
|
.name = "spi_palmtt",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct omap_backlight_config palmtt_backlight_config = {
|
|
.default_intensity = 0xa0,
|
|
};
|
|
|
|
static struct platform_device palmtt_backlight_device = {
|
|
.name = "omap-bl",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data= &palmtt_backlight_config,
|
|
},
|
|
};
|
|
|
|
static struct omap_led_config palmtt_led_config[] = {
|
|
{
|
|
.cdev = {
|
|
.name = "palmtt:led0",
|
|
},
|
|
.gpio = PALMTT_LED_GPIO,
|
|
},
|
|
};
|
|
|
|
static struct omap_led_platform_data palmtt_led_data = {
|
|
.nr_leds = ARRAY_SIZE(palmtt_led_config),
|
|
.leds = palmtt_led_config,
|
|
};
|
|
|
|
static struct platform_device palmtt_led_device = {
|
|
.name = "omap-led",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &palmtt_led_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *palmtt_devices[] __initdata = {
|
|
&palmtt_flash_device,
|
|
&palmtt_mcbsp1_device,
|
|
&palmtt_kp_device,
|
|
&palmtt_lcd_device,
|
|
&palmtt_irda_device,
|
|
&palmtt_spi_device,
|
|
&palmtt_backlight_device,
|
|
&palmtt_led_device,
|
|
};
|
|
|
|
static int palmtt_get_pendown_state(void)
|
|
{
|
|
return !gpio_get_value(6);
|
|
}
|
|
|
|
static const struct ads7846_platform_data palmtt_ts_info = {
|
|
.model = 7846,
|
|
.vref_delay_usecs = 100, /* internal, no capacitor */
|
|
.x_plate_ohms = 419,
|
|
.y_plate_ohms = 486,
|
|
.get_pendown_state = palmtt_get_pendown_state,
|
|
};
|
|
|
|
static struct spi_board_info __initdata palmtt_boardinfo[] = {
|
|
{
|
|
/* MicroWire (bus 2) CS0 has an ads7846e */
|
|
.modalias = "ads7846",
|
|
.platform_data = &palmtt_ts_info,
|
|
.irq = OMAP_GPIO_IRQ(6),
|
|
.max_speed_hz = 120000 /* max sample rate at 3V */
|
|
* 26 /* command + data + overhead */,
|
|
.bus_num = 2,
|
|
.chip_select = 0,
|
|
}
|
|
};
|
|
|
|
static void __init omap_palmtt_init_irq(void)
|
|
{
|
|
omap1_init_common_hw();
|
|
omap_init_irq();
|
|
}
|
|
|
|
static struct omap_usb_config palmtt_usb_config __initdata = {
|
|
.register_dev = 1,
|
|
.hmc_mode = 0,
|
|
.pins[0] = 2,
|
|
};
|
|
|
|
static struct omap_lcd_config palmtt_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_uart_config palmtt_uart_config __initdata = {
|
|
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
|
|
};
|
|
|
|
static struct omap_board_config_kernel palmtt_config[] __initdata = {
|
|
{ OMAP_TAG_USB, &palmtt_usb_config },
|
|
{ OMAP_TAG_LCD, &palmtt_lcd_config },
|
|
{ OMAP_TAG_UART, &palmtt_uart_config },
|
|
};
|
|
|
|
static void __init omap_mpu_wdt_mode(int mode) {
|
|
if (mode)
|
|
omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
|
|
else {
|
|
omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
|
|
omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
|
|
}
|
|
}
|
|
|
|
static void __init omap_palmtt_init(void)
|
|
{
|
|
omap_mpu_wdt_mode(0);
|
|
|
|
omap_board_config = palmtt_config;
|
|
omap_board_config_size = ARRAY_SIZE(palmtt_config);
|
|
|
|
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
|
|
|
|
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
|
|
omap_serial_init();
|
|
omap_register_i2c_bus(1, 100, NULL, 0);
|
|
}
|
|
|
|
static void __init omap_palmtt_map_io(void)
|
|
{
|
|
omap1_map_common_io();
|
|
}
|
|
|
|
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
|
|
.phys_io = 0xfff00000,
|
|
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
|
|
.boot_params = 0x10000100,
|
|
.map_io = omap_palmtt_map_io,
|
|
.init_irq = omap_palmtt_init_irq,
|
|
.init_machine = omap_palmtt_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|