.. |
88pm8607.c
|
regulator: 88pm8607: Use regulator_get_voltage_sel_regmap()
|
2012-05-04 13:32:06 +01:00 |
aat2870-regulator.c
|
regulator: Remove unneeded include of linux/delay.h from regulator drivers
|
2012-04-23 13:20:26 +01:00 |
ab3100.c
|
regulator: ab3100: Convert fixed voltage to use regulator_list_voltage_linear
|
2012-06-17 21:05:28 +01:00 |
ab8500.c
|
regulator: ab8500: Remove min_uV and max_uV from struct ab8500_regulator_info
|
2012-06-17 21:04:45 +01:00 |
ad5398.c
|
regulator: core: Use a struct to pass in regulator runtime configuration
|
2012-04-09 12:37:09 +01:00 |
anatop-regulator.c
|
Linux 3.5-rc4
|
2012-06-25 10:11:40 +01:00 |
arizona-ldo1.c
|
regulator: Add driver for Arizona LDO1
|
2012-06-25 10:32:51 +01:00 |
arizona-micsupp.c
|
regulator: arizona-micsupp: Fix choosing selector in arizona_micsupp_map_voltage
|
2012-06-26 11:48:05 +01:00 |
core.c
|
Linux 3.5-rc4
|
2012-06-25 10:11:40 +01:00 |
da903x.c
|
regulator: da903x: Don't read/write to DA9030_INVAL/DA9034_INVAL address
|
2012-06-08 07:29:47 +08:00 |
da9052-regulator.c
|
regulator: da9052: Convert to set_voltage_sel and map_voltage
|
2012-05-16 09:48:57 +01:00 |
db8500-prcmu.c
|
regulator: Change db8500-prcmu match names to reflect Device Tree
|
2012-06-17 18:27:49 +01:00 |
dbx500-prcmu.c
|
regulators/db8500: split off shared dbx500 code
|
2012-01-20 12:01:29 +00:00 |
dbx500-prcmu.h
|
regulators/db8500: split off shared dbx500 code
|
2012-01-20 12:01:29 +00:00 |
dummy.c
|
regulator: dummy: Specify a struct device
|
2012-05-10 10:48:28 +01:00 |
dummy.h
|
regulator: fix build when CONFIG_REGULATOR_DUMMY=n
|
2010-10-28 22:40:32 +01:00 |
fixed-helper.c
|
regulator: Remove non-existent parameter from fixed-helper.c kernel doc
|
2012-03-31 19:41:20 +01:00 |
fixed.c
|
regulator: fixed: support deferred probe for DT GPIOs
|
2012-07-01 19:12:59 +01:00 |
gpio-regulator.c
|
regulator: gpio-regulator: populate selector from set_voltage
|
2012-06-04 10:44:30 +01:00 |
isl6271a-regulator.c
|
regulator: isl6271a: Remove setting map_voltage callback for isl_fixed_ops
|
2012-06-11 12:01:40 +08:00 |
Kconfig
|
regulator: lp872x: Depend on I2C=y
|
2012-06-21 10:38:37 +01:00 |
lp872x.c
|
regulator: change message level on probing lp872x driver
|
2012-06-21 11:04:06 +01:00 |
lp3971.c
|
regulator: lp3971: Use regulator_list_voltage_table()
|
2012-06-03 13:25:02 +01:00 |
lp3972.c
|
regulator: lp3972: Use regulator_list_voltage_table()
|
2012-06-03 13:25:01 +01:00 |
Makefile
|
regulator: Add driver for Arizona LDO1
|
2012-06-25 10:32:51 +01:00 |
max1586.c
|
regulator: max1586: Convert max1586_v3_ops to set_voltage_sel and map_voltage_linear
|
2012-06-08 08:48:23 +08:00 |
max8649.c
|
regulator: max8649: fix missing regmap in rdev
|
2012-06-05 11:15:22 +01:00 |
max8660.c
|
regulator: max8660: Convert to set_voltage_sel and regulator_map_voltage_linear
|
2012-05-15 18:35:42 +01:00 |
max8925-regulator.c
|
regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
|
2012-05-17 23:00:56 +01:00 |
max8952.c
|
regulator: max8952: Use devm_kzalloc
|
2012-05-16 09:48:37 +01:00 |
max8997.c
|
regulator updates for 3.5
|
2012-05-21 16:49:16 -07:00 |
max8998.c
|
regulator: max8998: Convert to set_voltage_sel and regulator_map_voltage_linear
|
2012-06-23 12:18:08 +01:00 |
max77686.c
|
regulator: max77686: Implement .set_ramp_delay() callback
|
2012-06-20 11:15:13 +01:00 |
mc13xxx-regulator-core.c
|
regulator: mc13xxx: Remove mc13xxx_sw_regulator_is_enabled function
|
2012-06-19 12:06:25 +01:00 |
mc13xxx.h
|
regulator: mc13xxx: Remove mc13xxx_sw_regulator_is_enabled function
|
2012-06-19 12:06:25 +01:00 |
mc13783-regulator.c
|
regulator: mc13xxx: Convert to regulator_list_voltage_table
|
2012-06-17 21:01:21 +01:00 |
mc13892-regulator.c
|
regulator: mc13xxx: Remove mc13xxx_sw_regulator_is_enabled function
|
2012-06-19 12:06:25 +01:00 |
of_regulator.c
|
regulator: Fix setting constraints->ramp_delay in of_get_regulation_constraints
|
2012-06-18 10:46:57 +01:00 |
palmas-regulator.c
|
Linux 3.5-rc5
|
2012-07-02 18:24:59 +01:00 |
pcap-regulator.c
|
regulator: pcap: Convert to regulator_list_voltage_table
|
2012-06-08 07:37:29 +08:00 |
pcf50633-regulator.c
|
regulator: pcf50633: Convert to regulator_set_voltage_sel_regmap and map_voltage
|
2012-06-17 21:05:28 +01:00 |
rc5t583-regulator.c
|
regulator: rc5t583: Use regulator_set_voltage_time_sel()
|
2012-06-24 12:13:38 +01:00 |
s5m8767.c
|
regulator: s5m8767: Convert to regulator_list_voltage_linear
|
2012-06-26 11:50:33 +01:00 |
tps6105x-regulator.c
|
regulator: tps6105x: Use regulator_list_voltage_table()
|
2012-06-03 13:25:01 +01:00 |
tps6507x-regulator.c
|
regulator: tps6507x: Avoid duplicating the same mapping table for LDO2 and VDCDCx
|
2012-06-05 11:20:53 +01:00 |
tps6524x-regulator.c
|
regulator: tps6524x: Fix get_voltage_sel for fixed voltage
|
2012-06-20 11:20:24 +01:00 |
tps6586x-regulator.c
|
regulator: tps6586x: Convert to regulator_list_voltage_table
|
2012-06-08 07:52:59 +08:00 |
tps62360-regulator.c
|
regulator: tps62360: Remove chip_id and voltage_base from struct tps62360_chip
|
2012-06-23 12:16:42 +01:00 |
tps65023-regulator.c
|
regulator: tps65023: Convert tps65023_ldo_ops to regulator_[get|set]_voltage_sel_regmap
|
2012-06-19 12:14:11 +01:00 |
tps65090-regulator.c
|
Merge remote-tracking branch 'regulator/topic/drivers' into regulator-next
|
2012-05-12 11:10:25 +01:00 |
tps65217-regulator.c
|
regulator: tps65217: Convert LDO1 to use regulator_list_voltage_table
|
2012-07-01 19:12:58 +01:00 |
tps65910-regulator.c
|
regulator: tps65910: Convert to regulator_list_voltage_table
|
2012-06-22 10:13:31 +01:00 |
tps65912-regulator.c
|
regulator: tps65912: Convert to get_voltage_sel
|
2012-04-23 13:20:27 +01:00 |
twl-regulator.c
|
regulator: twl: Remove references to 32kHz clock from DT bindings
|
2012-06-18 13:40:14 +01:00 |
userspace-consumer.c
|
regulator: userspace-consumer: Convert to use devm_* APIs
|
2012-04-18 10:26:24 +01:00 |
virtual.c
|
regulator: virtual: Replace strict_strtol with kstrtol
|
2012-04-19 13:48:34 +01:00 |
wm831x-dcdc.c
|
regulator: wm831x-dcdc: Convert wm831x_buckv_ops to set_voltage_sel and map_voltage
|
2012-06-17 21:07:19 +01:00 |
wm831x-isink.c
|
MFD changes for 3.5
|
2012-05-29 11:53:11 -07:00 |
wm831x-ldo.c
|
regulator: wm831x-ldo: Convert to regulator_set_voltage_sel_regmap and map_voltage
|
2012-06-17 21:07:19 +01:00 |
wm8350-regulator.c
|
regulator: wm8350: Reuse map_voltage() to get selector of a given uV
|
2012-06-17 20:53:58 +01:00 |
wm8400-regulator.c
|
regulator: wm8400: Adjust the equation for selector >= 15 in wm8400_ldo_list_voltage
|
2012-06-13 18:53:23 +01:00 |
wm8994-regulator.c
|
regulator: wm8994: Convert wm8994_ldo1_ops to regulator_[list|map]_voltage_linear
|
2012-06-03 13:25:05 +01:00 |