forked from luck/tmp_suning_uos_patched
f47671e2d8
Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
341 lines
12 KiB
Makefile
341 lines
12 KiB
Makefile
#
|
|
# arch/arm/Makefile
|
|
#
|
|
# This file is included by the global makefile so that you can add your own
|
|
# architecture-specific flags and dependencies.
|
|
#
|
|
# This file is subject to the terms and conditions of the GNU General Public
|
|
# License. See the file "COPYING" in the main directory of this archive
|
|
# for more details.
|
|
#
|
|
# Copyright (C) 1995-2001 by Russell King
|
|
|
|
# Ensure linker flags are correct
|
|
LDFLAGS :=
|
|
|
|
LDFLAGS_vmlinux :=-p --no-undefined -X
|
|
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
|
|
LDFLAGS_vmlinux += --be8
|
|
LDFLAGS_MODULE += --be8
|
|
endif
|
|
|
|
OBJCOPYFLAGS :=-O binary -R .comment -S
|
|
GZFLAGS :=-9
|
|
#KBUILD_CFLAGS +=-pipe
|
|
|
|
# Never generate .eh_frame
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
|
|
|
|
# Do not use arch/arm/defconfig - it's always outdated.
|
|
# Select a platform tht is kept up-to-date
|
|
KBUILD_DEFCONFIG := versatile_defconfig
|
|
|
|
# defines filename extension depending memory management type.
|
|
ifeq ($(CONFIG_MMU),)
|
|
MMUEXT := -nommu
|
|
KBUILD_CFLAGS += $(call cc-option,-mno-unaligned-access)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_FRAME_POINTER),y)
|
|
KBUILD_CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
|
|
endif
|
|
|
|
ifeq ($(CONFIG_CC_STACKPROTECTOR),y)
|
|
KBUILD_CFLAGS +=-fstack-protector
|
|
endif
|
|
|
|
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
|
|
KBUILD_CPPFLAGS += -mbig-endian
|
|
AS += -EB
|
|
LD += -EB
|
|
else
|
|
KBUILD_CPPFLAGS += -mlittle-endian
|
|
AS += -EL
|
|
LD += -EL
|
|
endif
|
|
|
|
comma = ,
|
|
|
|
# This selects which instruction set is used.
|
|
# Note that GCC does not numerically define an architecture version
|
|
# macro, but instead defines a whole series of macros which makes
|
|
# testing for a specific architecture or later rather impossible.
|
|
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
|
|
arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
|
|
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
|
|
# Only override the compiler option if ARMv6. The ARMv6K extensions are
|
|
# always available in ARMv7
|
|
ifeq ($(CONFIG_CPU_32v6),y)
|
|
arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
|
|
endif
|
|
arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
|
|
arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t
|
|
arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4
|
|
arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3
|
|
|
|
# Evaluate arch cc-option calls now
|
|
arch-y := $(arch-y)
|
|
|
|
# This selects how we optimise for the processor.
|
|
tune-$(CONFIG_CPU_ARM7TDMI) =-mtune=arm7tdmi
|
|
tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi
|
|
tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi
|
|
tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
|
|
tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi
|
|
tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110
|
|
tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
|
|
tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
|
|
tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
|
|
tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
|
|
tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
|
|
tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
|
|
|
|
# Evaluate tune cc-option calls now
|
|
tune-y := $(tune-y)
|
|
|
|
ifeq ($(CONFIG_AEABI),y)
|
|
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
|
|
else
|
|
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARM_UNWIND),y)
|
|
CFLAGS_ABI +=-funwind-tables
|
|
endif
|
|
|
|
ifeq ($(CONFIG_THUMB2_KERNEL),y)
|
|
AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
|
|
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
|
|
CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
|
|
AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb
|
|
# Work around buggy relocation from gas if requested:
|
|
ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
|
|
CFLAGS_MODULE +=-fno-optimize-sibling-calls
|
|
endif
|
|
else
|
|
CFLAGS_ISA :=$(call cc-option,-marm,)
|
|
AFLAGS_ISA :=$(CFLAGS_ISA)
|
|
endif
|
|
|
|
# Need -Uarm for gcc < 3.x
|
|
KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
|
|
KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
|
|
|
|
CHECKFLAGS += -D__arm__
|
|
|
|
#Default value
|
|
head-y := arch/arm/kernel/head$(MMUEXT).o
|
|
textofs-y := 0x00008000
|
|
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
|
|
# We don't want the htc bootloader to corrupt kernel during resume
|
|
textofs-$(CONFIG_PM_H1940) := 0x00108000
|
|
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
|
|
ifeq ($(CONFIG_ARCH_SA1100),y)
|
|
textofs-$(CONFIG_SA1111) := 0x00208000
|
|
endif
|
|
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
|
|
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
|
|
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
|
|
|
|
# Machine directory name. This list is sorted alphanumerically
|
|
# by CONFIG_* macro name.
|
|
machine-$(CONFIG_ARCH_AT91) += at91
|
|
machine-$(CONFIG_ARCH_BCM) += bcm
|
|
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
|
|
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
|
|
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
|
|
machine-$(CONFIG_ARCH_DAVINCI) += davinci
|
|
machine-$(CONFIG_ARCH_DOVE) += dove
|
|
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
|
|
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
|
|
machine-$(CONFIG_ARCH_EXYNOS) += exynos
|
|
machine-$(CONFIG_ARCH_GEMINI) += gemini
|
|
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
|
|
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
|
|
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
|
|
machine-$(CONFIG_ARCH_IOP32X) += iop32x
|
|
machine-$(CONFIG_ARCH_IOP33X) += iop33x
|
|
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
|
|
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
|
|
machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
|
|
machine-$(CONFIG_ARCH_KS8695) += ks8695
|
|
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
|
|
machine-$(CONFIG_ARCH_MMP) += mmp
|
|
machine-$(CONFIG_ARCH_MSM) += msm
|
|
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
|
|
machine-$(CONFIG_ARCH_MVEBU) += mvebu
|
|
machine-$(CONFIG_ARCH_MXC) += imx
|
|
machine-$(CONFIG_ARCH_MXS) += mxs
|
|
machine-$(CONFIG_ARCH_NETX) += netx
|
|
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
|
|
machine-$(CONFIG_ARCH_NSPIRE) += nspire
|
|
machine-$(CONFIG_ARCH_OMAP1) += omap1
|
|
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
|
|
machine-$(CONFIG_ARCH_ORION5X) += orion5x
|
|
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
|
|
machine-$(CONFIG_ARCH_PXA) += pxa
|
|
machine-$(CONFIG_ARCH_REALVIEW) += realview
|
|
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
|
|
machine-$(CONFIG_ARCH_RPC) += rpc
|
|
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
|
|
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
|
|
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
|
|
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
|
|
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
|
|
machine-$(CONFIG_ARCH_SA1100) += sa1100
|
|
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
|
|
machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
|
|
machine-$(CONFIG_ARCH_SIRF) += prima2
|
|
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
|
|
machine-$(CONFIG_ARCH_STI) += sti
|
|
machine-$(CONFIG_ARCH_SUNXI) += sunxi
|
|
machine-$(CONFIG_ARCH_TEGRA) += tegra
|
|
machine-$(CONFIG_ARCH_U300) += u300
|
|
machine-$(CONFIG_ARCH_U8500) += ux500
|
|
machine-$(CONFIG_ARCH_VERSATILE) += versatile
|
|
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
|
|
machine-$(CONFIG_ARCH_VIRT) += virt
|
|
machine-$(CONFIG_ARCH_VT8500) += vt8500
|
|
machine-$(CONFIG_ARCH_W90X900) += w90x900
|
|
machine-$(CONFIG_ARCH_ZYNQ) += zynq
|
|
machine-$(CONFIG_FOOTBRIDGE) += footbridge
|
|
machine-$(CONFIG_PLAT_SPEAR) += spear
|
|
|
|
# Platform directory name. This list is sorted alphanumerically
|
|
# by CONFIG_* macro name.
|
|
plat-$(CONFIG_ARCH_EXYNOS) += samsung
|
|
plat-$(CONFIG_ARCH_OMAP) += omap
|
|
plat-$(CONFIG_ARCH_S3C64XX) += samsung
|
|
plat-$(CONFIG_PLAT_IOP) += iop
|
|
plat-$(CONFIG_PLAT_ORION) += orion
|
|
plat-$(CONFIG_PLAT_PXA) += pxa
|
|
plat-$(CONFIG_PLAT_S3C24XX) += samsung
|
|
plat-$(CONFIG_PLAT_S5P) += samsung
|
|
plat-$(CONFIG_PLAT_VERSATILE) += versatile
|
|
|
|
ifeq ($(CONFIG_ARCH_EBSA110),y)
|
|
# This is what happens if you forget the IOCS16 line.
|
|
# PCMCIA cards stop working.
|
|
CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
|
|
export CFLAGS_3c589_cs.o
|
|
endif
|
|
|
|
# The byte offset of the kernel image in RAM from the start of RAM.
|
|
TEXT_OFFSET := $(textofs-y)
|
|
|
|
# The first directory contains additional information for the boot setup code
|
|
ifneq ($(machine-y),)
|
|
MACHINE := arch/arm/mach-$(word 1,$(machine-y))/
|
|
else
|
|
MACHINE :=
|
|
endif
|
|
ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
|
|
MACHINE :=
|
|
endif
|
|
|
|
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
|
|
platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
|
|
|
|
ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
|
|
ifeq ($(KBUILD_SRC),)
|
|
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
|
|
else
|
|
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
|
|
endif
|
|
endif
|
|
|
|
export TEXT_OFFSET GZFLAGS MMUEXT
|
|
|
|
# Do we have FASTFPE?
|
|
FASTFPE :=arch/arm/fastfpe
|
|
ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
|
|
FASTFPE_OBJ :=$(FASTFPE)/
|
|
endif
|
|
|
|
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
|
|
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
|
|
core-$(CONFIG_VFP) += arch/arm/vfp/
|
|
core-$(CONFIG_XEN) += arch/arm/xen/
|
|
core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/
|
|
|
|
# If we have a machine-specific directory, then include it in the build.
|
|
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
|
|
core-y += arch/arm/net/
|
|
core-y += arch/arm/crypto/
|
|
core-y += $(machdirs) $(platdirs)
|
|
|
|
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
|
|
|
|
libs-y := arch/arm/lib/ $(libs-y)
|
|
|
|
# Default target when executing plain make
|
|
ifeq ($(CONFIG_XIP_KERNEL),y)
|
|
KBUILD_IMAGE := xipImage
|
|
else
|
|
KBUILD_IMAGE := zImage
|
|
endif
|
|
|
|
# Build the DT binary blobs if we have OF configured
|
|
ifeq ($(CONFIG_USE_OF),y)
|
|
KBUILD_DTBS := dtbs
|
|
endif
|
|
|
|
all: $(KBUILD_IMAGE) $(KBUILD_DTBS)
|
|
|
|
boot := arch/arm/boot
|
|
|
|
archprepare:
|
|
$(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h
|
|
|
|
# Convert bzImage to zImage
|
|
bzImage: zImage
|
|
|
|
BOOT_TARGETS = zImage Image xipImage bootpImage uImage
|
|
INSTALL_TARGETS = zinstall uinstall install
|
|
|
|
PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
|
|
|
|
$(BOOT_TARGETS): vmlinux
|
|
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
|
|
|
|
$(INSTALL_TARGETS):
|
|
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
|
|
|
|
%.dtb: | scripts
|
|
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
|
|
|
|
PHONY += dtbs
|
|
dtbs: scripts
|
|
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
|
|
|
|
# We use MRPROPER_FILES and CLEAN_FILES now
|
|
archclean:
|
|
$(Q)$(MAKE) $(clean)=$(boot)
|
|
|
|
# My testing targets (bypasses dependencies)
|
|
bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
|
|
i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
|
|
|
|
|
|
define archhelp
|
|
echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
|
|
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
|
|
echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
|
|
echo ' uImage - U-Boot wrapped zImage'
|
|
echo ' bootpImage - Combined zImage and initial RAM disk'
|
|
echo ' (supply initrd image via make variable INITRD=<path>)'
|
|
echo '* dtbs - Build device tree blobs for enabled boards'
|
|
echo ' install - Install uncompressed kernel'
|
|
echo ' zinstall - Install compressed kernel'
|
|
echo ' uinstall - Install U-Boot wrapped compressed kernel'
|
|
echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or'
|
|
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
|
|
echo ' install to $$(INSTALL_PATH) and run lilo'
|
|
endef
|