kernel_optimize_test/drivers/clocksource/samsung_pwm_timer.c
Daniel Lezcano 1727339590 clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:58:45 +02:00

510 lines
13 KiB
C

/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sched_clock.h>
#include <clocksource/samsung_pwm.h>
/*
* Clocksource driver
*/
#define REG_TCFG0 0x00
#define REG_TCFG1 0x04
#define REG_TCON 0x08
#define REG_TINT_CSTAT 0x44
#define REG_TCNTB(chan) (0x0c + 12 * (chan))
#define REG_TCMPB(chan) (0x10 + 12 * (chan))
#define TCFG0_PRESCALER_MASK 0xff
#define TCFG0_PRESCALER1_SHIFT 8
#define TCFG1_SHIFT(x) ((x) * 4)
#define TCFG1_MUX_MASK 0xf
/*
* Each channel occupies 4 bits in TCON register, but there is a gap of 4
* bits (one channel) after channel 0, so channels have different numbering
* when accessing TCON register.
*
* In addition, the location of autoreload bit for channel 4 (TCON channel 5)
* in its set of bits is 2 as opposed to 3 for other channels.
*/
#define TCON_START(chan) (1 << (4 * (chan) + 0))
#define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1))
#define TCON_INVERT(chan) (1 << (4 * (chan) + 2))
#define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3))
#define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) + 2))
#define TCON_AUTORELOAD(chan) \
((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))
DEFINE_SPINLOCK(samsung_pwm_lock);
EXPORT_SYMBOL(samsung_pwm_lock);
struct samsung_pwm_clocksource {
void __iomem *base;
void __iomem *source_reg;
unsigned int irq[SAMSUNG_PWM_NUM];
struct samsung_pwm_variant variant;
struct clk *timerclk;
unsigned int event_id;
unsigned int source_id;
unsigned int tcnt_max;
unsigned int tscaler_div;
unsigned int tdiv;
unsigned long clock_count_per_tick;
};
static struct samsung_pwm_clocksource pwm;
static void samsung_timer_set_prescale(unsigned int channel, u16 prescale)
{
unsigned long flags;
u8 shift = 0;
u32 reg;
if (channel >= 2)
shift = TCFG0_PRESCALER1_SHIFT;
spin_lock_irqsave(&samsung_pwm_lock, flags);
reg = readl(pwm.base + REG_TCFG0);
reg &= ~(TCFG0_PRESCALER_MASK << shift);
reg |= (prescale - 1) << shift;
writel(reg, pwm.base + REG_TCFG0);
spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}
static void samsung_timer_set_divisor(unsigned int channel, u8 divisor)
{
u8 shift = TCFG1_SHIFT(channel);
unsigned long flags;
u32 reg;
u8 bits;
bits = (fls(divisor) - 1) - pwm.variant.div_base;
spin_lock_irqsave(&samsung_pwm_lock, flags);
reg = readl(pwm.base + REG_TCFG1);
reg &= ~(TCFG1_MUX_MASK << shift);
reg |= bits << shift;
writel(reg, pwm.base + REG_TCFG1);
spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}
static void samsung_time_stop(unsigned int channel)
{
unsigned long tcon;
unsigned long flags;
if (channel > 0)
++channel;
spin_lock_irqsave(&samsung_pwm_lock, flags);
tcon = readl_relaxed(pwm.base + REG_TCON);
tcon &= ~TCON_START(channel);
writel_relaxed(tcon, pwm.base + REG_TCON);
spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}
static void samsung_time_setup(unsigned int channel, unsigned long tcnt)
{
unsigned long tcon;
unsigned long flags;
unsigned int tcon_chan = channel;
if (tcon_chan > 0)
++tcon_chan;
spin_lock_irqsave(&samsung_pwm_lock, flags);
tcon = readl_relaxed(pwm.base + REG_TCON);
tcon &= ~(TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan));
tcon |= TCON_MANUALUPDATE(tcon_chan);
writel_relaxed(tcnt, pwm.base + REG_TCNTB(channel));
writel_relaxed(tcnt, pwm.base + REG_TCMPB(channel));
writel_relaxed(tcon, pwm.base + REG_TCON);
spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}
static void samsung_time_start(unsigned int channel, bool periodic)
{
unsigned long tcon;
unsigned long flags;
if (channel > 0)
++channel;
spin_lock_irqsave(&samsung_pwm_lock, flags);
tcon = readl_relaxed(pwm.base + REG_TCON);
tcon &= ~TCON_MANUALUPDATE(channel);
tcon |= TCON_START(channel);
if (periodic)
tcon |= TCON_AUTORELOAD(channel);
else
tcon &= ~TCON_AUTORELOAD(channel);
writel_relaxed(tcon, pwm.base + REG_TCON);
spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}
static int samsung_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
/*
* This check is needed to account for internal rounding
* errors inside clockevents core, which might result in
* passing cycles = 0, which in turn would not generate any
* timer interrupt and hang the system.
*
* Another solution would be to set up the clockevent device
* with min_delta = 2, but this would unnecessarily increase
* the minimum sleep period.
*/
if (!cycles)
cycles = 1;
samsung_time_setup(pwm.event_id, cycles);
samsung_time_start(pwm.event_id, false);
return 0;
}
static int samsung_shutdown(struct clock_event_device *evt)
{
samsung_time_stop(pwm.event_id);
return 0;
}
static int samsung_set_periodic(struct clock_event_device *evt)
{
samsung_time_stop(pwm.event_id);
samsung_time_setup(pwm.event_id, pwm.clock_count_per_tick - 1);
samsung_time_start(pwm.event_id, true);
return 0;
}
static void samsung_clockevent_resume(struct clock_event_device *cev)
{
samsung_timer_set_prescale(pwm.event_id, pwm.tscaler_div);
samsung_timer_set_divisor(pwm.event_id, pwm.tdiv);
if (pwm.variant.has_tint_cstat) {
u32 mask = (1 << pwm.event_id);
writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
}
}
static struct clock_event_device time_event_device = {
.name = "samsung_event_timer",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.set_next_event = samsung_set_next_event,
.set_state_shutdown = samsung_shutdown,
.set_state_periodic = samsung_set_periodic,
.set_state_oneshot = samsung_shutdown,
.tick_resume = samsung_shutdown,
.resume = samsung_clockevent_resume,
};
static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
if (pwm.variant.has_tint_cstat) {
u32 mask = (1 << pwm.event_id);
writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
}
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction samsung_clock_event_irq = {
.name = "samsung_time_irq",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = samsung_clock_event_isr,
.dev_id = &time_event_device,
};
static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
unsigned int irq_number;
pclk = clk_get_rate(pwm.timerclk);
samsung_timer_set_prescale(pwm.event_id, pwm.tscaler_div);
samsung_timer_set_divisor(pwm.event_id, pwm.tdiv);
clock_rate = pclk / (pwm.tscaler_div * pwm.tdiv);
pwm.clock_count_per_tick = clock_rate / HZ;
time_event_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&time_event_device,
clock_rate, 1, pwm.tcnt_max);
irq_number = pwm.irq[pwm.event_id];
setup_irq(irq_number, &samsung_clock_event_irq);
if (pwm.variant.has_tint_cstat) {
u32 mask = (1 << pwm.event_id);
writel(mask | (mask << 5), pwm.base + REG_TINT_CSTAT);
}
}
static void samsung_clocksource_suspend(struct clocksource *cs)
{
samsung_time_stop(pwm.source_id);
}
static void samsung_clocksource_resume(struct clocksource *cs)
{
samsung_timer_set_prescale(pwm.source_id, pwm.tscaler_div);
samsung_timer_set_divisor(pwm.source_id, pwm.tdiv);
samsung_time_setup(pwm.source_id, pwm.tcnt_max);
samsung_time_start(pwm.source_id, true);
}
static u64 notrace samsung_clocksource_read(struct clocksource *c)
{
return ~readl_relaxed(pwm.source_reg);
}
static struct clocksource samsung_clocksource = {
.name = "samsung_clocksource_timer",
.rating = 250,
.read = samsung_clocksource_read,
.suspend = samsung_clocksource_suspend,
.resume = samsung_clocksource_resume,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel. We accept that
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
static u64 notrace samsung_read_sched_clock(void)
{
return samsung_clocksource_read(NULL);
}
static int __init samsung_clocksource_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
pclk = clk_get_rate(pwm.timerclk);
samsung_timer_set_prescale(pwm.source_id, pwm.tscaler_div);
samsung_timer_set_divisor(pwm.source_id, pwm.tdiv);
clock_rate = pclk / (pwm.tscaler_div * pwm.tdiv);
samsung_time_setup(pwm.source_id, pwm.tcnt_max);
samsung_time_start(pwm.source_id, true);
if (pwm.source_id == 4)
pwm.source_reg = pwm.base + 0x40;
else
pwm.source_reg = pwm.base + pwm.source_id * 0x0c + 0x14;
sched_clock_register(samsung_read_sched_clock,
pwm.variant.bits, clock_rate);
samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
return clocksource_register_hz(&samsung_clocksource, clock_rate);
}
static void __init samsung_timer_resources(void)
{
clk_prepare_enable(pwm.timerclk);
pwm.tcnt_max = (1UL << pwm.variant.bits) - 1;
if (pwm.variant.bits == 16) {
pwm.tscaler_div = 25;
pwm.tdiv = 2;
} else {
pwm.tscaler_div = 2;
pwm.tdiv = 1;
}
}
/*
* PWM master driver
*/
static int __init _samsung_pwm_clocksource_init(void)
{
u8 mask;
int channel;
mask = ~pwm.variant.output_mask & ((1 << SAMSUNG_PWM_NUM) - 1);
channel = fls(mask) - 1;
if (channel < 0) {
pr_crit("failed to find PWM channel for clocksource\n");
return -EINVAL;
}
pwm.source_id = channel;
mask &= ~(1 << channel);
channel = fls(mask) - 1;
if (channel < 0) {
pr_crit("failed to find PWM channel for clock event\n");
return -EINVAL;
}
pwm.event_id = channel;
samsung_timer_resources();
samsung_clockevent_init();
return samsung_clocksource_init();
}
void __init samsung_pwm_clocksource_init(void __iomem *base,
unsigned int *irqs, struct samsung_pwm_variant *variant)
{
pwm.base = base;
memcpy(&pwm.variant, variant, sizeof(pwm.variant));
memcpy(pwm.irq, irqs, SAMSUNG_PWM_NUM * sizeof(*irqs));
pwm.timerclk = clk_get(NULL, "timers");
if (IS_ERR(pwm.timerclk))
panic("failed to get timers clock for timer");
_samsung_pwm_clocksource_init();
}
#ifdef CONFIG_CLKSRC_OF
static int __init samsung_pwm_alloc(struct device_node *np,
const struct samsung_pwm_variant *variant)
{
struct property *prop;
const __be32 *cur;
u32 val;
int i;
memcpy(&pwm.variant, variant, sizeof(pwm.variant));
for (i = 0; i < SAMSUNG_PWM_NUM; ++i)
pwm.irq[i] = irq_of_parse_and_map(np, i);
of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
if (val >= SAMSUNG_PWM_NUM) {
pr_warning("%s: invalid channel index in samsung,pwm-outputs property\n",
__func__);
continue;
}
pwm.variant.output_mask |= 1 << val;
}
pwm.base = of_iomap(np, 0);
if (!pwm.base) {
pr_err("%s: failed to map PWM registers\n", __func__);
return -ENXIO;
}
pwm.timerclk = of_clk_get_by_name(np, "timers");
if (IS_ERR(pwm.timerclk)) {
pr_crit("failed to get timers clock for timer\n");
return PTR_ERR(pwm.timerclk);
}
return _samsung_pwm_clocksource_init();
}
static const struct samsung_pwm_variant s3c24xx_variant = {
.bits = 16,
.div_base = 1,
.has_tint_cstat = false,
.tclk_mask = (1 << 4),
};
static int __init s3c2410_pwm_clocksource_init(struct device_node *np)
{
return samsung_pwm_alloc(np, &s3c24xx_variant);
}
TIMER_OF_DECLARE(s3c2410_pwm, "samsung,s3c2410-pwm", s3c2410_pwm_clocksource_init);
static const struct samsung_pwm_variant s3c64xx_variant = {
.bits = 32,
.div_base = 0,
.has_tint_cstat = true,
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
static int __init s3c64xx_pwm_clocksource_init(struct device_node *np)
{
return samsung_pwm_alloc(np, &s3c64xx_variant);
}
TIMER_OF_DECLARE(s3c6400_pwm, "samsung,s3c6400-pwm", s3c64xx_pwm_clocksource_init);
static const struct samsung_pwm_variant s5p64x0_variant = {
.bits = 32,
.div_base = 0,
.has_tint_cstat = true,
.tclk_mask = 0,
};
static int __init s5p64x0_pwm_clocksource_init(struct device_node *np)
{
return samsung_pwm_alloc(np, &s5p64x0_variant);
}
TIMER_OF_DECLARE(s5p6440_pwm, "samsung,s5p6440-pwm", s5p64x0_pwm_clocksource_init);
static const struct samsung_pwm_variant s5p_variant = {
.bits = 32,
.div_base = 0,
.has_tint_cstat = true,
.tclk_mask = (1 << 5),
};
static int __init s5p_pwm_clocksource_init(struct device_node *np)
{
return samsung_pwm_alloc(np, &s5p_variant);
}
TIMER_OF_DECLARE(s5pc100_pwm, "samsung,s5pc100-pwm", s5p_pwm_clocksource_init);
#endif