kernel_optimize_test/include/linux/fsl_devices.h
Eric Bénard 69cb1ec4ce mxc_udc: add workaround for ENGcm09152 for i.MX35
this patch gives the possibility to workaround bug ENGcm09152
on i.MX35 when the hardware workaround is also implemented on
the board.
It covers the workaround described on page 25 of the following Errata :
http://cache.freescale.com/files/dsp/doc/errata/IMX35CE.pdf

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:22:17 -07:00

123 lines
3.4 KiB
C

/*
* include/linux/fsl_devices.h
*
* Definitions for any platform device related flags or structures for
* Freescale processor devices
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _FSL_DEVICE_H_
#define _FSL_DEVICE_H_
#include <linux/types.h>
/*
* Some conventions on how we handle peripherals on Freescale chips
*
* unique device: a platform_device entry in fsl_plat_devs[] plus
* associated device information in its platform_data structure.
*
* A chip is described by a set of unique devices.
*
* Each sub-arch has its own master list of unique devices and
* enumerates them by enum fsl_devices in a sub-arch specific header
*
* The platform data structure is broken into two parts. The
* first is device specific information that help identify any
* unique features of a peripheral. The second is any
* information that may be defined by the board or how the device
* is connected externally of the chip.
*
* naming conventions:
* - platform data structures: <driver>_platform_data
* - platform data device flags: FSL_<driver>_DEV_<FLAG>
* - platform data board flags: FSL_<driver>_BRD_<FLAG>
*
*/
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
FSL_USB2_DR_DEVICE,
FSL_USB2_DR_OTG,
};
enum fsl_usb2_phy_modes {
FSL_USB2_PHY_NONE,
FSL_USB2_PHY_ULPI,
FSL_USB2_PHY_UTMI,
FSL_USB2_PHY_UTMI_WIDE,
FSL_USB2_PHY_SERIAL,
};
struct clk;
struct platform_device;
struct fsl_usb2_platform_data {
/* board specific information */
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
unsigned int workaround;
int (*init)(struct platform_device *);
void (*exit)(struct platform_device *);
void __iomem *regs; /* ioremap'd register base */
struct clk *clk;
unsigned big_endian_mmio:1;
unsigned big_endian_desc:1;
unsigned es:1; /* need USBMODE:ES */
unsigned le_setup_buf:1;
unsigned have_sysif_regs:1;
unsigned invert_drvvbus:1;
unsigned invert_pwr_fault:1;
};
/* Flags in fsl_usb2_mph_platform_data */
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
#define FLS_USB2_WORKAROUND_ENGCM09152 (1 << 0)
struct spi_device;
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
s16 bus_num;
unsigned int flags;
#define SPI_QE_CPU_MODE (1 << 0) /* QE CPU ("PIO") mode */
#define SPI_CPM_MODE (1 << 1) /* CPM/QE ("DMA") mode */
#define SPI_CPM1 (1 << 2) /* SPI unit is in CPM1 block */
#define SPI_CPM2 (1 << 3) /* SPI unit is in CPM2 block */
#define SPI_QE (1 << 4) /* SPI unit is in QE block */
/* board specific information */
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
};
struct mpc8xx_pcmcia_ops {
void(*hw_ctrl)(int slot, int enable);
int(*voltage_set)(int slot, int vcc, int vpp);
};
/* Returns non-zero if the current suspend operation would
* lead to a deep sleep (i.e. power removed from the core,
* instead of just the clock).
*/
#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
int fsl_deep_sleep(void);
#else
static inline int fsl_deep_sleep(void) { return 0; }
#endif
#endif /* _FSL_DEVICE_H_ */