kernel_optimize_test/drivers/bluetooth/bpa10x.c
Marcel Holtmann 7a9d402053 Bluetooth: Send HCI Reset command by default on device initialization
The Bluetooth subsystem was not using the HCI Reset command when doing
device initialization. The Bluetooth 1.0b specification was ambiguous
on how the device firmware was suppose to handle it. Almost every device
was triggering a transport reset at the same time. In case of USB this
ended up in disconnects from the bus.

All modern Bluetooth dongles handle this perfectly fine and a lot of
them actually require that HCI Reset is sent. If not then they are
either stuck in their HID Proxy mode or their internal structures for
inquiry and paging are not correctly setup.

To handle old and new devices smoothly the Bluetooth subsystem contains
a quirk to force the HCI Reset on initialization. However maintaining
such a quirk becomes more and more complicated. This patch turns the
logic around and lets the old devices disable the HCI Reset command.

The only device where the HCI_QUIRK_NO_RESET is still needed are the
original Digianswer devices and dongles with an early CSR firmware.

CSR reported that they fixed this for version 12 firmware. The last
official release of version 11 firmware is build ID 115. The first
version 12 candidate was build ID 117.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:26 +01:00

548 lines
11 KiB
C

/*
*
* Digianswer Bluetooth USB driver
*
* Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#ifndef CONFIG_BT_HCIBPA10X_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "0.10"
static struct usb_device_id bpa10x_table[] = {
/* Tektronix BPA 100/105 (Digianswer) */
{ USB_DEVICE(0x08fd, 0x0002) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, bpa10x_table);
struct bpa10x_data {
struct hci_dev *hdev;
struct usb_device *udev;
struct usb_anchor tx_anchor;
struct usb_anchor rx_anchor;
struct sk_buff *rx_skb[2];
};
#define HCI_VENDOR_HDR_SIZE 5
struct hci_vendor_hdr {
__u8 type;
__le16 snum;
__le16 dlen;
} __attribute__ ((packed));
static int bpa10x_recv(struct hci_dev *hdev, int queue, void *buf, int count)
{
struct bpa10x_data *data = hdev->driver_data;
BT_DBG("%s queue %d buffer %p count %d", hdev->name,
queue, buf, count);
if (queue < 0 || queue > 1)
return -EILSEQ;
hdev->stat.byte_rx += count;
while (count) {
struct sk_buff *skb = data->rx_skb[queue];
struct { __u8 type; int expect; } *scb;
int type, len = 0;
if (!skb) {
/* Start of the frame */
type = *((__u8 *) buf);
count--; buf++;
switch (type) {
case HCI_EVENT_PKT:
if (count >= HCI_EVENT_HDR_SIZE) {
struct hci_event_hdr *h = buf;
len = HCI_EVENT_HDR_SIZE + h->plen;
} else
return -EILSEQ;
break;
case HCI_ACLDATA_PKT:
if (count >= HCI_ACL_HDR_SIZE) {
struct hci_acl_hdr *h = buf;
len = HCI_ACL_HDR_SIZE +
__le16_to_cpu(h->dlen);
} else
return -EILSEQ;
break;
case HCI_SCODATA_PKT:
if (count >= HCI_SCO_HDR_SIZE) {
struct hci_sco_hdr *h = buf;
len = HCI_SCO_HDR_SIZE + h->dlen;
} else
return -EILSEQ;
break;
case HCI_VENDOR_PKT:
if (count >= HCI_VENDOR_HDR_SIZE) {
struct hci_vendor_hdr *h = buf;
len = HCI_VENDOR_HDR_SIZE +
__le16_to_cpu(h->dlen);
} else
return -EILSEQ;
break;
}
skb = bt_skb_alloc(len, GFP_ATOMIC);
if (!skb) {
BT_ERR("%s no memory for packet", hdev->name);
return -ENOMEM;
}
skb->dev = (void *) hdev;
data->rx_skb[queue] = skb;
scb = (void *) skb->cb;
scb->type = type;
scb->expect = len;
} else {
/* Continuation */
scb = (void *) skb->cb;
len = scb->expect;
}
len = min(len, count);
memcpy(skb_put(skb, len), buf, len);
scb->expect -= len;
if (scb->expect == 0) {
/* Complete frame */
data->rx_skb[queue] = NULL;
bt_cb(skb)->pkt_type = scb->type;
hci_recv_frame(skb);
}
count -= len; buf += len;
}
return 0;
}
static void bpa10x_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *) skb->dev;
BT_DBG("%s urb %p status %d count %d", hdev->name,
urb, urb->status, urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (!urb->status)
hdev->stat.byte_tx += urb->transfer_buffer_length;
else
hdev->stat.err_tx++;
done:
kfree(urb->setup_packet);
kfree_skb(skb);
}
static void bpa10x_rx_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct bpa10x_data *data = hdev->driver_data;
int err;
BT_DBG("%s urb %p status %d count %d", hdev->name,
urb, urb->status, urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
if (bpa10x_recv(hdev, usb_pipebulk(urb->pipe),
urb->transfer_buffer,
urb->actual_length) < 0) {
BT_ERR("%s corrupted event packet", hdev->name);
hdev->stat.err_rx++;
}
}
usb_anchor_urb(urb, &data->rx_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
}
static inline int bpa10x_submit_intr_urb(struct hci_dev *hdev)
{
struct bpa10x_data *data = hdev->driver_data;
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size = 16;
BT_DBG("%s", hdev->name);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
buf = kmalloc(size, GFP_KERNEL);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvintpipe(data->udev, 0x81);
usb_fill_int_urb(urb, data->udev, pipe, buf, size,
bpa10x_rx_complete, hdev, 1);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_anchor_urb(urb, &data->rx_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0) {
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static inline int bpa10x_submit_bulk_urb(struct hci_dev *hdev)
{
struct bpa10x_data *data = hdev->driver_data;
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size = 64;
BT_DBG("%s", hdev->name);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
buf = kmalloc(size, GFP_KERNEL);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvbulkpipe(data->udev, 0x82);
usb_fill_bulk_urb(urb, data->udev, pipe,
buf, size, bpa10x_rx_complete, hdev);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_anchor_urb(urb, &data->rx_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0) {
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static int bpa10x_open(struct hci_dev *hdev)
{
struct bpa10x_data *data = hdev->driver_data;
int err;
BT_DBG("%s", hdev->name);
if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
return 0;
err = bpa10x_submit_intr_urb(hdev);
if (err < 0)
goto error;
err = bpa10x_submit_bulk_urb(hdev);
if (err < 0)
goto error;
return 0;
error:
usb_kill_anchored_urbs(&data->rx_anchor);
clear_bit(HCI_RUNNING, &hdev->flags);
return err;
}
static int bpa10x_close(struct hci_dev *hdev)
{
struct bpa10x_data *data = hdev->driver_data;
BT_DBG("%s", hdev->name);
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
usb_kill_anchored_urbs(&data->rx_anchor);
return 0;
}
static int bpa10x_flush(struct hci_dev *hdev)
{
struct bpa10x_data *data = hdev->driver_data;
BT_DBG("%s", hdev->name);
usb_kill_anchored_urbs(&data->tx_anchor);
return 0;
}
static int bpa10x_send_frame(struct sk_buff *skb)
{
struct hci_dev *hdev = (struct hci_dev *) skb->dev;
struct bpa10x_data *data = hdev->driver_data;
struct usb_ctrlrequest *dr;
struct urb *urb;
unsigned int pipe;
int err;
BT_DBG("%s", hdev->name);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -EBUSY;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
/* Prepend skb with frame type */
*skb_push(skb, 1) = bt_cb(skb)->pkt_type;
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
if (!dr) {
usb_free_urb(urb);
return -ENOMEM;
}
dr->bRequestType = USB_TYPE_VENDOR;
dr->bRequest = 0;
dr->wIndex = 0;
dr->wValue = 0;
dr->wLength = __cpu_to_le16(skb->len);
pipe = usb_sndctrlpipe(data->udev, 0x00);
usb_fill_control_urb(urb, data->udev, pipe, (void *) dr,
skb->data, skb->len, bpa10x_tx_complete, skb);
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
pipe = usb_sndbulkpipe(data->udev, 0x02);
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, bpa10x_tx_complete, skb);
hdev->stat.acl_tx++;
break;
case HCI_SCODATA_PKT:
pipe = usb_sndbulkpipe(data->udev, 0x02);
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, bpa10x_tx_complete, skb);
hdev->stat.sco_tx++;
break;
default:
usb_free_urb(urb);
return -EILSEQ;
}
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
BT_ERR("%s urb %p submission failed", hdev->name, urb);
kfree(urb->setup_packet);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return 0;
}
static void bpa10x_destruct(struct hci_dev *hdev)
{
struct bpa10x_data *data = hdev->driver_data;
BT_DBG("%s", hdev->name);
kfree_skb(data->rx_skb[0]);
kfree_skb(data->rx_skb[1]);
kfree(data);
}
static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct bpa10x_data *data;
struct hci_dev *hdev;
int err;
BT_DBG("intf %p id %p", intf, id);
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->udev = interface_to_usbdev(intf);
init_usb_anchor(&data->tx_anchor);
init_usb_anchor(&data->rx_anchor);
hdev = hci_alloc_dev();
if (!hdev) {
kfree(data);
return -ENOMEM;
}
hdev->type = HCI_USB;
hdev->driver_data = data;
data->hdev = hdev;
SET_HCIDEV_DEV(hdev, &intf->dev);
hdev->open = bpa10x_open;
hdev->close = bpa10x_close;
hdev->flush = bpa10x_flush;
hdev->send = bpa10x_send_frame;
hdev->destruct = bpa10x_destruct;
hdev->owner = THIS_MODULE;
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
err = hci_register_dev(hdev);
if (err < 0) {
hci_free_dev(hdev);
kfree(data);
return err;
}
usb_set_intfdata(intf, data);
return 0;
}
static void bpa10x_disconnect(struct usb_interface *intf)
{
struct bpa10x_data *data = usb_get_intfdata(intf);
BT_DBG("intf %p", intf);
if (!data)
return;
usb_set_intfdata(intf, NULL);
hci_unregister_dev(data->hdev);
hci_free_dev(data->hdev);
}
static struct usb_driver bpa10x_driver = {
.name = "bpa10x",
.probe = bpa10x_probe,
.disconnect = bpa10x_disconnect,
.id_table = bpa10x_table,
};
static int __init bpa10x_init(void)
{
BT_INFO("Digianswer Bluetooth USB driver ver %s", VERSION);
return usb_register(&bpa10x_driver);
}
static void __exit bpa10x_exit(void)
{
usb_deregister(&bpa10x_driver);
}
module_init(bpa10x_init);
module_exit(bpa10x_exit);
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");