forked from luck/tmp_suning_uos_patched
25985edced
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
497 lines
21 KiB
Plaintext
497 lines
21 KiB
Plaintext
SCSI FC Tansport
|
|
=============================================
|
|
|
|
Date: 11/18/2008
|
|
Kernel Revisions for features:
|
|
rports : <<TBS>>
|
|
vports : 2.6.22
|
|
bsg support : 2.6.30 (?TBD?)
|
|
|
|
|
|
Introduction
|
|
============
|
|
This file documents the features and components of the SCSI FC Transport.
|
|
It also provides documents the API between the transport and FC LLDDs.
|
|
The FC transport can be found at:
|
|
drivers/scsi/scsi_transport_fc.c
|
|
include/scsi/scsi_transport_fc.h
|
|
include/scsi/scsi_netlink_fc.h
|
|
include/scsi/scsi_bsg_fc.h
|
|
|
|
This file is found at Documentation/scsi/scsi_fc_transport.txt
|
|
|
|
|
|
FC Remote Ports (rports)
|
|
========================================================================
|
|
<< To Be Supplied >>
|
|
|
|
|
|
FC Virtual Ports (vports)
|
|
========================================================================
|
|
|
|
Overview:
|
|
-------------------------------
|
|
|
|
New FC standards have defined mechanisms which allows for a single physical
|
|
port to appear on as multiple communication ports. Using the N_Port Id
|
|
Virtualization (NPIV) mechanism, a point-to-point connection to a Fabric
|
|
can be assigned more than 1 N_Port_ID. Each N_Port_ID appears as a
|
|
separate port to other endpoints on the fabric, even though it shares one
|
|
physical link to the switch for communication. Each N_Port_ID can have a
|
|
unique view of the fabric based on fabric zoning and array lun-masking
|
|
(just like a normal non-NPIV adapter). Using the Virtual Fabric (VF)
|
|
mechanism, adding a fabric header to each frame allows the port to
|
|
interact with the Fabric Port to join multiple fabrics. The port will
|
|
obtain an N_Port_ID on each fabric it joins. Each fabric will have its
|
|
own unique view of endpoints and configuration parameters. NPIV may be
|
|
used together with VF so that the port can obtain multiple N_Port_IDs
|
|
on each virtual fabric.
|
|
|
|
The FC transport is now recognizing a new object - a vport. A vport is
|
|
an entity that has a world-wide unique World Wide Port Name (wwpn) and
|
|
World Wide Node Name (wwnn). The transport also allows for the FC4's to
|
|
be specified for the vport, with FCP_Initiator being the primary role
|
|
expected. Once instantiated by one of the above methods, it will have a
|
|
distinct N_Port_ID and view of fabric endpoints and storage entities.
|
|
The fc_host associated with the physical adapter will export the ability
|
|
to create vports. The transport will create the vport object within the
|
|
Linux device tree, and instruct the fc_host's driver to instantiate the
|
|
virtual port. Typically, the driver will create a new scsi_host instance
|
|
on the vport, resulting in a unique <H,C,T,L> namespace for the vport.
|
|
Thus, whether a FC port is based on a physical port or on a virtual port,
|
|
each will appear as a unique scsi_host with its own target and lun space.
|
|
|
|
Note: At this time, the transport is written to create only NPIV-based
|
|
vports. However, consideration was given to VF-based vports and it
|
|
should be a minor change to add support if needed. The remaining
|
|
discussion will concentrate on NPIV.
|
|
|
|
Note: World Wide Name assignment (and uniqueness guarantees) are left
|
|
up to an administrative entity controlling the vport. For example,
|
|
if vports are to be associated with virtual machines, a XEN mgmt
|
|
utility would be responsible for creating wwpn/wwnn's for the vport,
|
|
using its own naming authority and OUI. (Note: it already does this
|
|
for virtual MAC addresses).
|
|
|
|
|
|
Device Trees and Vport Objects:
|
|
-------------------------------
|
|
|
|
Today, the device tree typically contains the scsi_host object,
|
|
with rports and scsi target objects underneath it. Currently the FC
|
|
transport creates the vport object and places it under the scsi_host
|
|
object corresponding to the physical adapter. The LLDD will allocate
|
|
a new scsi_host for the vport and link its object under the vport.
|
|
The remainder of the tree under the vports scsi_host is the same
|
|
as the non-NPIV case. The transport is written currently to easily
|
|
allow the parent of the vport to be something other than the scsi_host.
|
|
This could be used in the future to link the object onto a vm-specific
|
|
device tree. If the vport's parent is not the physical port's scsi_host,
|
|
a symbolic link to the vport object will be placed in the physical
|
|
port's scsi_host.
|
|
|
|
Here's what to expect in the device tree :
|
|
The typical Physical Port's Scsi_Host:
|
|
/sys/devices/.../host17/
|
|
and it has the typical descendant tree:
|
|
/sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0:
|
|
and then the vport is created on the Physical Port:
|
|
/sys/devices/.../host17/vport-17:0-0
|
|
and the vport's Scsi_Host is then created:
|
|
/sys/devices/.../host17/vport-17:0-0/host18
|
|
and then the rest of the tree progresses, such as:
|
|
/sys/devices/.../host17/vport-17:0-0/host18/rport-18:0-0/target18:0:0/18:0:0:0:
|
|
|
|
Here's what to expect in the sysfs tree :
|
|
scsi_hosts:
|
|
/sys/class/scsi_host/host17 physical port's scsi_host
|
|
/sys/class/scsi_host/host18 vport's scsi_host
|
|
fc_hosts:
|
|
/sys/class/fc_host/host17 physical port's fc_host
|
|
/sys/class/fc_host/host18 vport's fc_host
|
|
fc_vports:
|
|
/sys/class/fc_vports/vport-17:0-0 the vport's fc_vport
|
|
fc_rports:
|
|
/sys/class/fc_remote_ports/rport-17:0-0 rport on the physical port
|
|
/sys/class/fc_remote_ports/rport-18:0-0 rport on the vport
|
|
|
|
|
|
Vport Attributes:
|
|
-------------------------------
|
|
|
|
The new fc_vport class object has the following attributes
|
|
|
|
node_name: Read_Only
|
|
The WWNN of the vport
|
|
|
|
port_name: Read_Only
|
|
The WWPN of the vport
|
|
|
|
roles: Read_Only
|
|
Indicates the FC4 roles enabled on the vport.
|
|
|
|
symbolic_name: Read_Write
|
|
A string, appended to the driver's symbolic port name string, which
|
|
is registered with the switch to identify the vport. For example,
|
|
a hypervisor could set this string to "Xen Domain 2 VM 5 Vport 2",
|
|
and this set of identifiers can be seen on switch management screens
|
|
to identify the port.
|
|
|
|
vport_delete: Write_Only
|
|
When written with a "1", will tear down the vport.
|
|
|
|
vport_disable: Write_Only
|
|
When written with a "1", will transition the vport to a disabled.
|
|
state. The vport will still be instantiated with the Linux kernel,
|
|
but it will not be active on the FC link.
|
|
When written with a "0", will enable the vport.
|
|
|
|
vport_last_state: Read_Only
|
|
Indicates the previous state of the vport. See the section below on
|
|
"Vport States".
|
|
|
|
vport_state: Read_Only
|
|
Indicates the state of the vport. See the section below on
|
|
"Vport States".
|
|
|
|
vport_type: Read_Only
|
|
Reflects the FC mechanism used to create the virtual port.
|
|
Only NPIV is supported currently.
|
|
|
|
|
|
For the fc_host class object, the following attributes are added for vports:
|
|
|
|
max_npiv_vports: Read_Only
|
|
Indicates the maximum number of NPIV-based vports that the
|
|
driver/adapter can support on the fc_host.
|
|
|
|
npiv_vports_inuse: Read_Only
|
|
Indicates how many NPIV-based vports have been instantiated on the
|
|
fc_host.
|
|
|
|
vport_create: Write_Only
|
|
A "simple" create interface to instantiate a vport on an fc_host.
|
|
A "<WWPN>:<WWNN>" string is written to the attribute. The transport
|
|
then instantiates the vport object and calls the LLDD to create the
|
|
vport with the role of FCP_Initiator. Each WWN is specified as 16
|
|
hex characters and may *not* contain any prefixes (e.g. 0x, x, etc).
|
|
|
|
vport_delete: Write_Only
|
|
A "simple" delete interface to teardown a vport. A "<WWPN>:<WWNN>"
|
|
string is written to the attribute. The transport will locate the
|
|
vport on the fc_host with the same WWNs and tear it down. Each WWN
|
|
is specified as 16 hex characters and may *not* contain any prefixes
|
|
(e.g. 0x, x, etc).
|
|
|
|
|
|
Vport States:
|
|
-------------------------------
|
|
|
|
Vport instantiation consists of two parts:
|
|
- Creation with the kernel and LLDD. This means all transport and
|
|
driver data structures are built up, and device objects created.
|
|
This is equivalent to a driver "attach" on an adapter, which is
|
|
independent of the adapter's link state.
|
|
- Instantiation of the vport on the FC link via ELS traffic, etc.
|
|
This is equivalent to a "link up" and successful link initialization.
|
|
Further information can be found in the interfaces section below for
|
|
Vport Creation.
|
|
|
|
Once a vport has been instantiated with the kernel/LLDD, a vport state
|
|
can be reported via the sysfs attribute. The following states exist:
|
|
|
|
FC_VPORT_UNKNOWN - Unknown
|
|
An temporary state, typically set only while the vport is being
|
|
instantiated with the kernel and LLDD.
|
|
|
|
FC_VPORT_ACTIVE - Active
|
|
The vport has been successfully been created on the FC link.
|
|
It is fully functional.
|
|
|
|
FC_VPORT_DISABLED - Disabled
|
|
The vport instantiated, but "disabled". The vport is not instantiated
|
|
on the FC link. This is equivalent to a physical port with the
|
|
link "down".
|
|
|
|
FC_VPORT_LINKDOWN - Linkdown
|
|
The vport is not operational as the physical link is not operational.
|
|
|
|
FC_VPORT_INITIALIZING - Initializing
|
|
The vport is in the process of instantiating on the FC link.
|
|
The LLDD will set this state just prior to starting the ELS traffic
|
|
to create the vport. This state will persist until the vport is
|
|
successfully created (state becomes FC_VPORT_ACTIVE) or it fails
|
|
(state is one of the values below). As this state is transitory,
|
|
it will not be preserved in the "vport_last_state".
|
|
|
|
FC_VPORT_NO_FABRIC_SUPP - No Fabric Support
|
|
The vport is not operational. One of the following conditions were
|
|
encountered:
|
|
- The FC topology is not Point-to-Point
|
|
- The FC port is not connected to an F_Port
|
|
- The F_Port has indicated that NPIV is not supported.
|
|
|
|
FC_VPORT_NO_FABRIC_RSCS - No Fabric Resources
|
|
The vport is not operational. The Fabric failed FDISC with a status
|
|
indicating that it does not have sufficient resources to complete
|
|
the operation.
|
|
|
|
FC_VPORT_FABRIC_LOGOUT - Fabric Logout
|
|
The vport is not operational. The Fabric has LOGO'd the N_Port_ID
|
|
associated with the vport.
|
|
|
|
FC_VPORT_FABRIC_REJ_WWN - Fabric Rejected WWN
|
|
The vport is not operational. The Fabric failed FDISC with a status
|
|
indicating that the WWN's are not valid.
|
|
|
|
FC_VPORT_FAILED - VPort Failed
|
|
The vport is not operational. This is a catchall for all other
|
|
error conditions.
|
|
|
|
|
|
The following state table indicates the different state transitions:
|
|
|
|
State Event New State
|
|
--------------------------------------------------------------------
|
|
n/a Initialization Unknown
|
|
Unknown: Link Down Linkdown
|
|
Link Up & Loop No Fabric Support
|
|
Link Up & no Fabric No Fabric Support
|
|
Link Up & FLOGI response No Fabric Support
|
|
indicates no NPIV support
|
|
Link Up & FDISC being sent Initializing
|
|
Disable request Disable
|
|
Linkdown: Link Up Unknown
|
|
Initializing: FDISC ACC Active
|
|
FDISC LS_RJT w/ no resources No Fabric Resources
|
|
FDISC LS_RJT w/ invalid Fabric Rejected WWN
|
|
pname or invalid nport_id
|
|
FDISC LS_RJT failed for Vport Failed
|
|
other reasons
|
|
Link Down Linkdown
|
|
Disable request Disable
|
|
Disable: Enable request Unknown
|
|
Active: LOGO received from fabric Fabric Logout
|
|
Link Down Linkdown
|
|
Disable request Disable
|
|
Fabric Logout: Link still up Unknown
|
|
|
|
The following 4 error states all have the same transitions:
|
|
No Fabric Support:
|
|
No Fabric Resources:
|
|
Fabric Rejected WWN:
|
|
Vport Failed:
|
|
Disable request Disable
|
|
Link goes down Linkdown
|
|
|
|
|
|
Transport <-> LLDD Interfaces :
|
|
-------------------------------
|
|
|
|
Vport support by LLDD:
|
|
|
|
The LLDD indicates support for vports by supplying a vport_create()
|
|
function in the transport template. The presence of this function will
|
|
cause the creation of the new attributes on the fc_host. As part of
|
|
the physical port completing its initialization relative to the
|
|
transport, it should set the max_npiv_vports attribute to indicate the
|
|
maximum number of vports the driver and/or adapter supports.
|
|
|
|
|
|
Vport Creation:
|
|
|
|
The LLDD vport_create() syntax is:
|
|
|
|
int vport_create(struct fc_vport *vport, bool disable)
|
|
|
|
where:
|
|
vport: Is the newly allocated vport object
|
|
disable: If "true", the vport is to be created in a disabled stated.
|
|
If "false", the vport is to be enabled upon creation.
|
|
|
|
When a request is made to create a new vport (via sgio/netlink, or the
|
|
vport_create fc_host attribute), the transport will validate that the LLDD
|
|
can support another vport (e.g. max_npiv_vports > npiv_vports_inuse).
|
|
If not, the create request will be failed. If space remains, the transport
|
|
will increment the vport count, create the vport object, and then call the
|
|
LLDD's vport_create() function with the newly allocated vport object.
|
|
|
|
As mentioned above, vport creation is divided into two parts:
|
|
- Creation with the kernel and LLDD. This means all transport and
|
|
driver data structures are built up, and device objects created.
|
|
This is equivalent to a driver "attach" on an adapter, which is
|
|
independent of the adapter's link state.
|
|
- Instantiation of the vport on the FC link via ELS traffic, etc.
|
|
This is equivalent to a "link up" and successful link initialization.
|
|
|
|
The LLDD's vport_create() function will not synchronously wait for both
|
|
parts to be fully completed before returning. It must validate that the
|
|
infrastructure exists to support NPIV, and complete the first part of
|
|
vport creation (data structure build up) before returning. We do not
|
|
hinge vport_create() on the link-side operation mainly because:
|
|
- The link may be down. It is not a failure if it is. It simply
|
|
means the vport is in an inoperable state until the link comes up.
|
|
This is consistent with the link bouncing post vport creation.
|
|
- The vport may be created in a disabled state.
|
|
- This is consistent with a model where: the vport equates to a
|
|
FC adapter. The vport_create is synonymous with driver attachment
|
|
to the adapter, which is independent of link state.
|
|
|
|
Note: special error codes have been defined to delineate infrastructure
|
|
failure cases for quicker resolution.
|
|
|
|
The expected behavior for the LLDD's vport_create() function is:
|
|
- Validate Infrastructure:
|
|
- If the driver or adapter cannot support another vport, whether
|
|
due to improper firmware, (a lie about) max_npiv, or a lack of
|
|
some other resource - return VPCERR_UNSUPPORTED.
|
|
- If the driver validates the WWN's against those already active on
|
|
the adapter and detects an overlap - return VPCERR_BAD_WWN.
|
|
- If the driver detects the topology is loop, non-fabric, or the
|
|
FLOGI did not support NPIV - return VPCERR_NO_FABRIC_SUPP.
|
|
- Allocate data structures. If errors are encountered, such as out
|
|
of memory conditions, return the respective negative Exxx error code.
|
|
- If the role is FCP Initiator, the LLDD is to :
|
|
- Call scsi_host_alloc() to allocate a scsi_host for the vport.
|
|
- Call scsi_add_host(new_shost, &vport->dev) to start the scsi_host
|
|
and bind it as a child of the vport device.
|
|
- Initializes the fc_host attribute values.
|
|
- Kick of further vport state transitions based on the disable flag and
|
|
link state - and return success (zero).
|
|
|
|
LLDD Implementers Notes:
|
|
- It is suggested that there be a different fc_function_templates for
|
|
the physical port and the virtual port. The physical port's template
|
|
would have the vport_create, vport_delete, and vport_disable functions,
|
|
while the vports would not.
|
|
- It is suggested that there be different scsi_host_templates
|
|
for the physical port and virtual port. Likely, there are driver
|
|
attributes, embedded into the scsi_host_template, that are applicable
|
|
for the physical port only (link speed, topology setting, etc). This
|
|
ensures that the attributes are applicable to the respective scsi_host.
|
|
|
|
|
|
Vport Disable/Enable:
|
|
|
|
The LLDD vport_disable() syntax is:
|
|
|
|
int vport_disable(struct fc_vport *vport, bool disable)
|
|
|
|
where:
|
|
vport: Is vport to be enabled or disabled
|
|
disable: If "true", the vport is to be disabled.
|
|
If "false", the vport is to be enabled.
|
|
|
|
When a request is made to change the disabled state on a vport, the
|
|
transport will validate the request against the existing vport state.
|
|
If the request is to disable and the vport is already disabled, the
|
|
request will fail. Similarly, if the request is to enable, and the
|
|
vport is not in a disabled state, the request will fail. If the request
|
|
is valid for the vport state, the transport will call the LLDD to
|
|
change the vport's state.
|
|
|
|
Within the LLDD, if a vport is disabled, it remains instantiated with
|
|
the kernel and LLDD, but it is not active or visible on the FC link in
|
|
any way. (see Vport Creation and the 2 part instantiation discussion).
|
|
The vport will remain in this state until it is deleted or re-enabled.
|
|
When enabling a vport, the LLDD reinstantiates the vport on the FC
|
|
link - essentially restarting the LLDD statemachine (see Vport States
|
|
above).
|
|
|
|
|
|
Vport Deletion:
|
|
|
|
The LLDD vport_delete() syntax is:
|
|
|
|
int vport_delete(struct fc_vport *vport)
|
|
|
|
where:
|
|
vport: Is vport to delete
|
|
|
|
When a request is made to delete a vport (via sgio/netlink, or via the
|
|
fc_host or fc_vport vport_delete attributes), the transport will call
|
|
the LLDD to terminate the vport on the FC link, and teardown all other
|
|
datastructures and references. If the LLDD completes successfully,
|
|
the transport will teardown the vport objects and complete the vport
|
|
removal. If the LLDD delete request fails, the vport object will remain,
|
|
but will be in an indeterminate state.
|
|
|
|
Within the LLDD, the normal code paths for a scsi_host teardown should
|
|
be followed. E.g. If the vport has a FCP Initiator role, the LLDD
|
|
will call fc_remove_host() for the vports scsi_host, followed by
|
|
scsi_remove_host() and scsi_host_put() for the vports scsi_host.
|
|
|
|
|
|
Other:
|
|
fc_host port_type attribute:
|
|
There is a new fc_host port_type value - FC_PORTTYPE_NPIV. This value
|
|
must be set on all vport-based fc_hosts. Normally, on a physical port,
|
|
the port_type attribute would be set to NPORT, NLPORT, etc based on the
|
|
topology type and existence of the fabric. As this is not applicable to
|
|
a vport, it makes more sense to report the FC mechanism used to create
|
|
the vport.
|
|
|
|
Driver unload:
|
|
FC drivers are required to call fc_remove_host() prior to calling
|
|
scsi_remove_host(). This allows the fc_host to tear down all remote
|
|
ports prior the scsi_host being torn down. The fc_remove_host() call
|
|
was updated to remove all vports for the fc_host as well.
|
|
|
|
|
|
Transport supplied functions
|
|
----------------------------
|
|
|
|
The following functions are supplied by the FC-transport for use by LLDs.
|
|
|
|
fc_vport_create - create a vport
|
|
fc_vport_terminate - detach and remove a vport
|
|
|
|
Details:
|
|
|
|
/**
|
|
* fc_vport_create - Admin App or LLDD requests creation of a vport
|
|
* @shost: scsi host the virtual port is connected to.
|
|
* @ids: The world wide names, FC4 port roles, etc for
|
|
* the virtual port.
|
|
*
|
|
* Notes:
|
|
* This routine assumes no locks are held on entry.
|
|
*/
|
|
struct fc_vport *
|
|
fc_vport_create(struct Scsi_Host *shost, struct fc_vport_identifiers *ids)
|
|
|
|
/**
|
|
* fc_vport_terminate - Admin App or LLDD requests termination of a vport
|
|
* @vport: fc_vport to be terminated
|
|
*
|
|
* Calls the LLDD vport_delete() function, then deallocates and removes
|
|
* the vport from the shost and object tree.
|
|
*
|
|
* Notes:
|
|
* This routine assumes no locks are held on entry.
|
|
*/
|
|
int
|
|
fc_vport_terminate(struct fc_vport *vport)
|
|
|
|
|
|
FC BSG support (CT & ELS passthru, and more)
|
|
========================================================================
|
|
<< To Be Supplied >>
|
|
|
|
|
|
|
|
|
|
|
|
Credits
|
|
=======
|
|
The following people have contributed to this document:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
James Smart
|
|
james.smart@emulex.com
|
|
|