forked from luck/tmp_suning_uos_patched
260442cc5b
The scale can now be obtained with the "in_voltage_scale" file. By default, the scale returned corresponds to the internal VREF of 2.5V. It is possible to use an external VREF (through the REFIN/REFOUT pin of the chip), by passing a regulator to the driver. The scale will then be calculated according to the voltage reported by the regulator. Signed-off-by: Paul Cercueil <paul.cercueil@analog.com> Co-developed-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
299 lines
6.4 KiB
C
299 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* AD7091RX Analog to Digital converter driver
|
|
*
|
|
* Copyright 2014-2019 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include "ad7091r-base.h"
|
|
|
|
#define AD7091R_REG_RESULT 0
|
|
#define AD7091R_REG_CHANNEL 1
|
|
#define AD7091R_REG_CONF 2
|
|
#define AD7091R_REG_ALERT 3
|
|
#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4)
|
|
#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
|
|
#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
|
|
|
|
/* AD7091R_REG_RESULT */
|
|
#define AD7091R_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3)
|
|
#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff)
|
|
|
|
/* AD7091R_REG_CONF */
|
|
#define AD7091R_REG_CONF_AUTO BIT(8)
|
|
#define AD7091R_REG_CONF_CMD BIT(10)
|
|
|
|
#define AD7091R_REG_CONF_MODE_MASK \
|
|
(AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
|
|
|
|
enum ad7091r_mode {
|
|
AD7091R_MODE_SAMPLE,
|
|
AD7091R_MODE_COMMAND,
|
|
AD7091R_MODE_AUTOCYCLE,
|
|
};
|
|
|
|
struct ad7091r_state {
|
|
struct device *dev;
|
|
struct regmap *map;
|
|
struct regulator *vref;
|
|
const struct ad7091r_chip_info *chip_info;
|
|
enum ad7091r_mode mode;
|
|
struct mutex lock; /*lock to prevent concurent reads */
|
|
};
|
|
|
|
static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
|
|
{
|
|
int ret, conf;
|
|
|
|
switch (mode) {
|
|
case AD7091R_MODE_SAMPLE:
|
|
conf = 0;
|
|
break;
|
|
case AD7091R_MODE_COMMAND:
|
|
conf = AD7091R_REG_CONF_CMD;
|
|
break;
|
|
case AD7091R_MODE_AUTOCYCLE:
|
|
conf = AD7091R_REG_CONF_AUTO;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
|
|
AD7091R_REG_CONF_MODE_MASK, conf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
st->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel)
|
|
{
|
|
unsigned int dummy;
|
|
int ret;
|
|
|
|
/* AD7091R_REG_CHANNEL specified which channels to be converted */
|
|
ret = regmap_write(st->map, AD7091R_REG_CHANNEL,
|
|
BIT(channel) | (BIT(channel) << 8));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* There is a latency of one conversion before the channel conversion
|
|
* sequence is updated
|
|
*/
|
|
return regmap_read(st->map, AD7091R_REG_RESULT, &dummy);
|
|
}
|
|
|
|
static int ad7091r_read_one(struct iio_dev *iio_dev,
|
|
unsigned int channel, unsigned int *read_val)
|
|
{
|
|
struct ad7091r_state *st = iio_priv(iio_dev);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = ad7091r_set_channel(st, channel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(st->map, AD7091R_REG_RESULT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (AD7091R_REG_RESULT_CH_ID(val) != channel)
|
|
return -EIO;
|
|
|
|
*read_val = AD7091R_REG_RESULT_CONV_RESULT(val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7091r_read_raw(struct iio_dev *iio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long m)
|
|
{
|
|
struct ad7091r_state *st = iio_priv(iio_dev);
|
|
unsigned int read_val;
|
|
int ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (st->mode != AD7091R_MODE_COMMAND) {
|
|
ret = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
ret = ad7091r_read_one(iio_dev, chan->channel, &read_val);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
*val = read_val;
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (st->vref) {
|
|
ret = regulator_get_voltage(st->vref);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
*val = ret / 1000;
|
|
} else {
|
|
*val = st->chip_info->vref_mV;
|
|
}
|
|
|
|
*val2 = chan->scan_type.realbits;
|
|
ret = IIO_VAL_FRACTIONAL_LOG2;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&st->lock);
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info ad7091r_info = {
|
|
.read_raw = ad7091r_read_raw,
|
|
};
|
|
|
|
static irqreturn_t ad7091r_event_handler(int irq, void *private)
|
|
{
|
|
struct ad7091r_state *st = (struct ad7091r_state *) private;
|
|
struct iio_dev *iio_dev = dev_get_drvdata(st->dev);
|
|
unsigned int i, read_val;
|
|
int ret;
|
|
s64 timestamp = iio_get_time_ns(iio_dev);
|
|
|
|
ret = regmap_read(st->map, AD7091R_REG_ALERT, &read_val);
|
|
if (ret)
|
|
return IRQ_HANDLED;
|
|
|
|
for (i = 0; i < st->chip_info->num_channels; i++) {
|
|
if (read_val & BIT(i * 2))
|
|
iio_push_event(iio_dev,
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_RISING), timestamp);
|
|
if (read_val & BIT(i * 2 + 1))
|
|
iio_push_event(iio_dev,
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_FALLING), timestamp);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ad7091r_remove(void *data)
|
|
{
|
|
struct ad7091r_state *st = data;
|
|
|
|
regulator_disable(st->vref);
|
|
}
|
|
|
|
int ad7091r_probe(struct device *dev, const char *name,
|
|
const struct ad7091r_chip_info *chip_info,
|
|
struct regmap *map, int irq)
|
|
{
|
|
struct iio_dev *iio_dev;
|
|
struct ad7091r_state *st;
|
|
int ret;
|
|
|
|
iio_dev = devm_iio_device_alloc(dev, sizeof(*st));
|
|
if (!iio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(iio_dev);
|
|
st->dev = dev;
|
|
st->chip_info = chip_info;
|
|
st->map = map;
|
|
|
|
iio_dev->dev.parent = dev;
|
|
iio_dev->name = name;
|
|
iio_dev->info = &ad7091r_info;
|
|
iio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
iio_dev->num_channels = chip_info->num_channels;
|
|
iio_dev->channels = chip_info->channels;
|
|
|
|
if (irq) {
|
|
ret = devm_request_threaded_irq(dev, irq, NULL,
|
|
ad7091r_event_handler,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, st);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
st->vref = devm_regulator_get_optional(dev, "vref");
|
|
if (IS_ERR(st->vref)) {
|
|
if (PTR_ERR(st->vref) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
st->vref = NULL;
|
|
} else {
|
|
ret = regulator_enable(st->vref);
|
|
if (ret)
|
|
return ret;
|
|
ret = devm_add_action_or_reset(dev, ad7091r_remove, st);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Use command mode by default to convert only desired channels*/
|
|
ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(dev, iio_dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ad7091r_probe);
|
|
|
|
static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case AD7091R_REG_RESULT:
|
|
case AD7091R_REG_ALERT:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case AD7091R_REG_RESULT:
|
|
case AD7091R_REG_ALERT:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
const struct regmap_config ad7091r_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.writeable_reg = ad7091r_writeable_reg,
|
|
.volatile_reg = ad7091r_volatile_reg,
|
|
};
|
|
EXPORT_SYMBOL_GPL(ad7091r_regmap_config);
|
|
|
|
MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7091Rx multi-channel converters");
|
|
MODULE_LICENSE("GPL v2");
|