forked from luck/tmp_suning_uos_patched
1f51c10c5e
This patch removes the static memory mapping for the currently-unused peripherals [Synchronous Serial, Timer/Counter unit], and for those drivers that already ioremap() their registers [UART]. Also, the Ethernet driver now uses the platform_device resources but doesn't yet use ioremap() so we need to pass it the virtual address instead of the physical address. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
297 lines
7.1 KiB
C
297 lines
7.1 KiB
C
/*
|
|
* arch/arm/mach-at91rm9200/at91rm9200.c
|
|
*
|
|
* Copyright (C) 2005 SAN People
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
|
|
static struct map_desc at91rm9200_io_desc[] __initdata = {
|
|
{
|
|
.virtual = AT91_VA_BASE_SYS,
|
|
.pfn = __phys_to_pfn(AT91_BASE_SYS),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_VA_BASE_SPI,
|
|
.pfn = __phys_to_pfn(AT91RM9200_BASE_SPI),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_VA_BASE_EMAC,
|
|
.pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_VA_BASE_TWI,
|
|
.pfn = __phys_to_pfn(AT91RM9200_BASE_TWI),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_VA_BASE_MCI,
|
|
.pfn = __phys_to_pfn(AT91RM9200_BASE_MCI),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_VA_BASE_UDP,
|
|
.pfn = __phys_to_pfn(AT91RM9200_BASE_UDP),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_SRAM_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
|
|
.length = AT91RM9200_SRAM_SIZE,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Clocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The peripheral clocks.
|
|
*/
|
|
static struct clk udc_clk = {
|
|
.name = "udc_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_UDP,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ohci_clk = {
|
|
.name = "ohci_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_UHP,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ether_clk = {
|
|
.name = "ether_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_EMAC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc_clk = {
|
|
.name = "mci_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_MCI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi_clk = {
|
|
.name = "twi_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_TWI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart0_clk = {
|
|
.name = "usart0_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_US0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart1_clk = {
|
|
.name = "usart1_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_US1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart2_clk = {
|
|
.name = "usart2_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_US2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart3_clk = {
|
|
.name = "usart3_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_US3,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi_clk = {
|
|
.name = "spi_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_SPI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioA_clk = {
|
|
.name = "pioA_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_PIOA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioB_clk = {
|
|
.name = "pioB_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_PIOB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioC_clk = {
|
|
.name = "pioC_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_PIOC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioD_clk = {
|
|
.name = "pioD_clk",
|
|
.pmc_mask = 1 << AT91RM9200_ID_PIOD,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
|
|
static struct clk *periph_clocks[] __initdata = {
|
|
&pioA_clk,
|
|
&pioB_clk,
|
|
&pioC_clk,
|
|
&pioD_clk,
|
|
&usart0_clk,
|
|
&usart1_clk,
|
|
&usart2_clk,
|
|
&usart3_clk,
|
|
&mmc_clk,
|
|
&udc_clk,
|
|
&twi_clk,
|
|
&spi_clk,
|
|
// ssc 0 .. ssc2
|
|
// tc0 .. tc5
|
|
&ohci_clk,
|
|
ðer_clk,
|
|
// irq0 .. irq6
|
|
};
|
|
|
|
/*
|
|
* The four programmable clocks.
|
|
* You must configure pin multiplexing to bring these signals out.
|
|
*/
|
|
static struct clk pck0 = {
|
|
.name = "pck0",
|
|
.pmc_mask = AT91_PMC_PCK0,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 0,
|
|
};
|
|
static struct clk pck1 = {
|
|
.name = "pck1",
|
|
.pmc_mask = AT91_PMC_PCK1,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 1,
|
|
};
|
|
static struct clk pck2 = {
|
|
.name = "pck2",
|
|
.pmc_mask = AT91_PMC_PCK2,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 2,
|
|
};
|
|
static struct clk pck3 = {
|
|
.name = "pck3",
|
|
.pmc_mask = AT91_PMC_PCK3,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 3,
|
|
};
|
|
|
|
static void __init at91rm9200_register_clocks(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
|
clk_register(periph_clocks[i]);
|
|
|
|
clk_register(&pck0);
|
|
clk_register(&pck1);
|
|
clk_register(&pck2);
|
|
clk_register(&pck3);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* GPIO
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct at91_gpio_bank at91rm9200_gpio[] = {
|
|
{
|
|
.id = AT91RM9200_ID_PIOA,
|
|
.offset = AT91_PIOA,
|
|
.clock = &pioA_clk,
|
|
}, {
|
|
.id = AT91RM9200_ID_PIOB,
|
|
.offset = AT91_PIOB,
|
|
.clock = &pioB_clk,
|
|
}, {
|
|
.id = AT91RM9200_ID_PIOC,
|
|
.offset = AT91_PIOC,
|
|
.clock = &pioC_clk,
|
|
}, {
|
|
.id = AT91RM9200_ID_PIOD,
|
|
.offset = AT91_PIOD,
|
|
.clock = &pioD_clk,
|
|
}
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91RM9200 processor initialization
|
|
* -------------------------------------------------------------------- */
|
|
void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
|
|
{
|
|
/* Map peripherals */
|
|
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
|
|
|
|
/* Init clock subsystem */
|
|
at91_clock_init(main_clock);
|
|
|
|
/* Register the processor-specific clocks */
|
|
at91rm9200_register_clocks();
|
|
|
|
/* Initialize GPIO subsystem */
|
|
at91_gpio_init(at91rm9200_gpio, banks);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Interrupt initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
|
*/
|
|
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller (FIQ) */
|
|
7, /* System Peripherals */
|
|
0, /* Parallel IO Controller A */
|
|
0, /* Parallel IO Controller B */
|
|
0, /* Parallel IO Controller C */
|
|
0, /* Parallel IO Controller D */
|
|
6, /* USART 0 */
|
|
6, /* USART 1 */
|
|
6, /* USART 2 */
|
|
6, /* USART 3 */
|
|
0, /* Multimedia Card Interface */
|
|
4, /* USB Device Port */
|
|
0, /* Two-Wire Interface */
|
|
6, /* Serial Peripheral Interface */
|
|
5, /* Serial Synchronous Controller 0 */
|
|
5, /* Serial Synchronous Controller 1 */
|
|
5, /* Serial Synchronous Controller 2 */
|
|
0, /* Timer Counter 0 */
|
|
0, /* Timer Counter 1 */
|
|
0, /* Timer Counter 2 */
|
|
0, /* Timer Counter 3 */
|
|
0, /* Timer Counter 4 */
|
|
0, /* Timer Counter 5 */
|
|
3, /* USB Host port */
|
|
3, /* Ethernet MAC */
|
|
0, /* Advanced Interrupt Controller (IRQ0) */
|
|
0, /* Advanced Interrupt Controller (IRQ1) */
|
|
0, /* Advanced Interrupt Controller (IRQ2) */
|
|
0, /* Advanced Interrupt Controller (IRQ3) */
|
|
0, /* Advanced Interrupt Controller (IRQ4) */
|
|
0, /* Advanced Interrupt Controller (IRQ5) */
|
|
0 /* Advanced Interrupt Controller (IRQ6) */
|
|
};
|
|
|
|
void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
|
|
{
|
|
if (!priority)
|
|
priority = at91rm9200_default_irq_priority;
|
|
|
|
/* Initialize the AIC interrupt controller */
|
|
at91_aic_init(priority);
|
|
|
|
/* Enable GPIO interrupts */
|
|
at91_gpio_irq_setup();
|
|
}
|