AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
7d59773945
kernel_optimize_test/tools/lib/traceevent/plugin_scsi.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

434 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include "event-parse.h"
typedef unsigned long sector_t;
typedef uint64_t u64;
typedef unsigned int u32;
/*
* SCSI opcodes
*/
#define TEST_UNIT_READY 0x00
#define REZERO_UNIT 0x01
#define REQUEST_SENSE 0x03
#define FORMAT_UNIT 0x04
#define READ_BLOCK_LIMITS 0x05
#define REASSIGN_BLOCKS 0x07
#define INITIALIZE_ELEMENT_STATUS 0x07
#define READ_6 0x08
#define WRITE_6 0x0a
#define SEEK_6 0x0b
#define READ_REVERSE 0x0f
#define WRITE_FILEMARKS 0x10
#define SPACE 0x11
#define INQUIRY 0x12
#define RECOVER_BUFFERED_DATA 0x14
#define MODE_SELECT 0x15
#define RESERVE 0x16
#define RELEASE 0x17
#define COPY 0x18
#define ERASE 0x19
#define MODE_SENSE 0x1a
#define START_STOP 0x1b
#define RECEIVE_DIAGNOSTIC 0x1c
#define SEND_DIAGNOSTIC 0x1d
#define ALLOW_MEDIUM_REMOVAL 0x1e
#define READ_FORMAT_CAPACITIES 0x23
#define SET_WINDOW 0x24
#define READ_CAPACITY 0x25
#define READ_10 0x28
#define WRITE_10 0x2a
#define SEEK_10 0x2b
#define POSITION_TO_ELEMENT 0x2b
#define WRITE_VERIFY 0x2e
#define VERIFY 0x2f
#define SEARCH_HIGH 0x30
#define SEARCH_EQUAL 0x31
#define SEARCH_LOW 0x32
#define SET_LIMITS 0x33
#define PRE_FETCH 0x34
#define READ_POSITION 0x34
#define SYNCHRONIZE_CACHE 0x35
#define LOCK_UNLOCK_CACHE 0x36
#define READ_DEFECT_DATA 0x37
#define MEDIUM_SCAN 0x38
#define COMPARE 0x39
#define COPY_VERIFY 0x3a
#define WRITE_BUFFER 0x3b
#define READ_BUFFER 0x3c
#define UPDATE_BLOCK 0x3d
#define READ_LONG 0x3e
#define WRITE_LONG 0x3f
#define CHANGE_DEFINITION 0x40
#define WRITE_SAME 0x41
#define UNMAP 0x42
#define READ_TOC 0x43
#define READ_HEADER 0x44
#define GET_EVENT_STATUS_NOTIFICATION 0x4a
#define LOG_SELECT 0x4c
#define LOG_SENSE 0x4d
#define XDWRITEREAD_10 0x53
#define MODE_SELECT_10 0x55
#define RESERVE_10 0x56
#define RELEASE_10 0x57
#define MODE_SENSE_10 0x5a
#define PERSISTENT_RESERVE_IN 0x5e
#define PERSISTENT_RESERVE_OUT 0x5f
#define VARIABLE_LENGTH_CMD 0x7f
#define REPORT_LUNS 0xa0
#define SECURITY_PROTOCOL_IN 0xa2
#define MAINTENANCE_IN 0xa3
#define MAINTENANCE_OUT 0xa4
#define MOVE_MEDIUM 0xa5
#define EXCHANGE_MEDIUM 0xa6
#define READ_12 0xa8
#define SERVICE_ACTION_OUT_12 0xa9
#define WRITE_12 0xaa
#define SERVICE_ACTION_IN_12 0xab
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
#define SEARCH_EQUAL_12 0xb1
#define SEARCH_LOW_12 0xb2
#define SECURITY_PROTOCOL_OUT 0xb5
#define READ_ELEMENT_STATUS 0xb8
#define SEND_VOLUME_TAG 0xb6
#define WRITE_LONG_2 0xea
#define EXTENDED_COPY 0x83
#define RECEIVE_COPY_RESULTS 0x84
#define ACCESS_CONTROL_IN 0x86
#define ACCESS_CONTROL_OUT 0x87
#define READ_16 0x88
#define WRITE_16 0x8a
#define READ_ATTRIBUTE 0x8c
#define WRITE_ATTRIBUTE 0x8d
#define VERIFY_16 0x8f
#define SYNCHRONIZE_CACHE_16 0x91
#define WRITE_SAME_16 0x93
#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
#define SERVICE_ACTION_IN_16 0x9e
#define SERVICE_ACTION_OUT_16 0x9f
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
#define SAI_GET_LBA_STATUS 0x12
/* values for VARIABLE_LENGTH_CMD service action codes
* see spc4r17 Section D.3.5, table D.7 and D.8 */
#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
/* values for maintenance in */
#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
#define MI_REPORT_TARGET_PGS 0x0a
#define MI_REPORT_ALIASES 0x0b
#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
#define MI_REPORT_PRIORITY 0x0e
#define MI_REPORT_TIMESTAMP 0x0f
#define MI_MANAGEMENT_PROTOCOL_IN 0x10
/* value for MI_REPORT_TARGET_PGS ext header */
#define MI_EXT_HDR_PARAM_FMT 0x20
/* values for maintenance out */
#define MO_SET_IDENTIFYING_INFORMATION 0x06
#define MO_SET_TARGET_PGS 0x0a
#define MO_CHANGE_ALIASES 0x0b
#define MO_SET_PRIORITY 0x0e
#define MO_SET_TIMESTAMP 0x0f
#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
/* values for variable length command */
#define XDREAD_32 0x03
#define XDWRITE_32 0x04
#define XPWRITE_32 0x06
#define XDWRITEREAD_32 0x07
#define READ_32 0x09
#define VERIFY_32 0x0a
#define WRITE_32 0x0b
#define WRITE_SAME_32 0x0d
#define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f)
#define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9])
static const char *
scsi_trace_misc(struct trace_seq *, unsigned char *, int);
static const char *
scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len;
sector_t lba = 0, txlen = 0;
lba |= ((cdb[1] & 0x1F) << 16);
lba |= (cdb[2] << 8);
lba |= cdb[3];
txlen = cdb[4];
trace_seq_printf(p, "lba=%llu txlen=%llu",
(unsigned long long)lba, (unsigned long long)txlen);
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len;
sector_t lba = 0, txlen = 0;
lba |= (cdb[2] << 24);
lba |= (cdb[3] << 16);
lba |= (cdb[4] << 8);
lba |= cdb[5];
txlen |= (cdb[7] << 8);
txlen |= cdb[8];
trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
(unsigned long long)lba, (unsigned long long)txlen,
cdb[1] >> 5);
if (cdb[0] == WRITE_SAME)
trace_seq_printf(p, " unmap=%u", cdb[1] >> 3 & 1);
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_rw12(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len;
sector_t lba = 0, txlen = 0;
lba |= (cdb[2] << 24);
lba |= (cdb[3] << 16);
lba |= (cdb[4] << 8);
lba |= cdb[5];
txlen |= (cdb[6] << 24);
txlen |= (cdb[7] << 16);
txlen |= (cdb[8] << 8);
txlen |= cdb[9];
trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
(unsigned long long)lba, (unsigned long long)txlen,
cdb[1] >> 5);
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len;
sector_t lba = 0, txlen = 0;
lba |= ((u64)cdb[2] << 56);
lba |= ((u64)cdb[3] << 48);
lba |= ((u64)cdb[4] << 40);
lba |= ((u64)cdb[5] << 32);
lba |= (cdb[6] << 24);
lba |= (cdb[7] << 16);
lba |= (cdb[8] << 8);
lba |= cdb[9];
txlen |= (cdb[10] << 24);
txlen |= (cdb[11] << 16);
txlen |= (cdb[12] << 8);
txlen |= cdb[13];
trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u",
(unsigned long long)lba, (unsigned long long)txlen,
cdb[1] >> 5);
if (cdb[0] == WRITE_SAME_16)
trace_seq_printf(p, " unmap=%u", cdb[1] >> 3 & 1);
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len, *cmd;
sector_t lba = 0, txlen = 0;
u32 ei_lbrt = 0;
switch (SERVICE_ACTION32(cdb)) {
case READ_32:
cmd = "READ";
break;
case VERIFY_32:
cmd = "VERIFY";
break;
case WRITE_32:
cmd = "WRITE";
break;
case WRITE_SAME_32:
cmd = "WRITE_SAME";
break;
default:
trace_seq_printf(p, "UNKNOWN");
goto out;
}
lba |= ((u64)cdb[12] << 56);
lba |= ((u64)cdb[13] << 48);
lba |= ((u64)cdb[14] << 40);
lba |= ((u64)cdb[15] << 32);
lba |= (cdb[16] << 24);
lba |= (cdb[17] << 16);
lba |= (cdb[18] << 8);
lba |= cdb[19];
ei_lbrt |= (cdb[20] << 24);
ei_lbrt |= (cdb[21] << 16);
ei_lbrt |= (cdb[22] << 8);
ei_lbrt |= cdb[23];
txlen |= (cdb[28] << 24);
txlen |= (cdb[29] << 16);
txlen |= (cdb[30] << 8);
txlen |= cdb[31];
trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu protect=%u ei_lbrt=%u",
cmd, (unsigned long long)lba,
(unsigned long long)txlen, cdb[10] >> 5, ei_lbrt);
if (SERVICE_ACTION32(cdb) == WRITE_SAME_32)
trace_seq_printf(p, " unmap=%u", cdb[10] >> 3 & 1);
out:
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_unmap(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len;
unsigned int regions = cdb[7] << 8 | cdb[8];
trace_seq_printf(p, "regions=%u", (regions - 8) / 16);
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len, *cmd;
sector_t lba = 0;
u32 alloc_len = 0;
switch (SERVICE_ACTION16(cdb)) {
case SAI_READ_CAPACITY_16:
cmd = "READ_CAPACITY_16";
break;
case SAI_GET_LBA_STATUS:
cmd = "GET_LBA_STATUS";
break;
default:
trace_seq_printf(p, "UNKNOWN");
goto out;
}
lba |= ((u64)cdb[2] << 56);
lba |= ((u64)cdb[3] << 48);
lba |= ((u64)cdb[4] << 40);
lba |= ((u64)cdb[5] << 32);
lba |= (cdb[6] << 24);
lba |= (cdb[7] << 16);
lba |= (cdb[8] << 8);
lba |= cdb[9];
alloc_len |= (cdb[10] << 24);
alloc_len |= (cdb[11] << 16);
alloc_len |= (cdb[12] << 8);
alloc_len |= cdb[13];
trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd,
(unsigned long long)lba, alloc_len);
out:
trace_seq_putc(p, 0);
return ret;
}
static const char *
scsi_trace_varlen(struct trace_seq *p, unsigned char *cdb, int len)
{
switch (SERVICE_ACTION32(cdb)) {
case READ_32:
case VERIFY_32:
case WRITE_32:
case WRITE_SAME_32:
return scsi_trace_rw32(p, cdb, len);
default:
return scsi_trace_misc(p, cdb, len);
}
}
static const char *
scsi_trace_misc(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = p->buffer + p->len;
trace_seq_printf(p, "-");
trace_seq_putc(p, 0);
return ret;
}
const char *
scsi_trace_parse_cdb(struct trace_seq *p, unsigned char *cdb, int len)
{
switch (cdb[0]) {
case READ_6:
case WRITE_6:
return scsi_trace_rw6(p, cdb, len);
case READ_10:
case VERIFY:
case WRITE_10:
case WRITE_SAME:
return scsi_trace_rw10(p, cdb, len);
case READ_12:
case VERIFY_12:
case WRITE_12:
return scsi_trace_rw12(p, cdb, len);
case READ_16:
case VERIFY_16:
case WRITE_16:
case WRITE_SAME_16:
return scsi_trace_rw16(p, cdb, len);
case UNMAP:
return scsi_trace_unmap(p, cdb, len);
case SERVICE_ACTION_IN_16:
return scsi_trace_service_action_in(p, cdb, len);
case VARIABLE_LENGTH_CMD:
return scsi_trace_varlen(p, cdb, len);
default:
return scsi_trace_misc(p, cdb, len);
}
}
unsigned long long process_scsi_trace_parse_cdb(struct trace_seq *s,
unsigned long long *args)
{
scsi_trace_parse_cdb(s, (unsigned char *) (unsigned long) args[1], args[2]);
return 0;
}
int PEVENT_PLUGIN_LOADER(struct pevent *pevent)
{
pevent_register_print_function(pevent,
process_scsi_trace_parse_cdb,
PEVENT_FUNC_ARG_STRING,
"scsi_trace_parse_cdb",
PEVENT_FUNC_ARG_PTR,
PEVENT_FUNC_ARG_PTR,
PEVENT_FUNC_ARG_INT,
PEVENT_FUNC_ARG_VOID);
return 0;
}
void PEVENT_PLUGIN_UNLOADER(struct pevent *pevent)
{
pevent_unregister_print_function(pevent, process_scsi_trace_parse_cdb,
"scsi_trace_parse_cdb");
}
View Git Blame Copy Permalink