Bjørn Mork 84f3b43f73 USB: serial: option: add Olicard 600 ... This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> [ johan: use tabs to align comments in adjacent lines ] Signed-off-by: Johan Hovold <johan@kernel.org>		2019-03-28 09:27:22 +01:00
..
aircable.c
ark3116.c
belkin_sa.c
belkin_sa.h
bus.c
ch341.c
console.c	USB: serial: console: fix reported terminal settings	2018-12-05 11:29:10 +01:00
cp210x.c	USB: serial: cp210x: add new device id	2019-03-28 08:59:49 +01:00
cyberjack.c
cypress_m8.c
cypress_m8.h
digi_acceleport.c
empeg.c
ezusb_convert.pl
f81232.c
f81534.c	USB: serial: f81534: fix reading old/new IC config	2018-11-20 18:25:44 +01:00
ftdi_sio_ids.h	USB: serial: ftdi_sio: add additional NovaTech products	2019-03-19 10:37:26 +01:00
ftdi_sio.c	USB: serial: ftdi_sio: add additional NovaTech products	2019-03-19 10:37:26 +01:00
ftdi_sio.h
garmin_gps.c
generic.c
io_16654.h
io_edgeport.c
io_edgeport.h
io_ionsp.h
io_ti.c
io_ti.h
io_usbvend.h
ipaq.c
ipw.c
ir-usb.c
iuu_phoenix.c
iuu_phoenix.h
Kconfig	USB: add missing SPDX lines to Kconfig and Makefiles	2019-01-22 09:08:17 +01:00
keyspan_pda.c
keyspan_usa26msg.h	USB: serial: keyspan_usa: add proper SPDX lines for .h files	2019-01-18 11:09:32 +01:00
keyspan_usa28msg.h	USB: serial: keyspan_usa: add proper SPDX lines for .h files	2019-01-18 11:09:32 +01:00
keyspan_usa49msg.h	USB: serial: keyspan_usa: add proper SPDX lines for .h files	2019-01-18 11:09:32 +01:00
keyspan_usa67msg.h	USB: serial: keyspan_usa: add proper SPDX lines for .h files	2019-01-18 11:09:32 +01:00
keyspan_usa90msg.h	USB: serial: keyspan_usa: add proper SPDX lines for .h files	2019-01-18 11:09:32 +01:00
keyspan.c
kl5kusb105.c
kl5kusb105.h
kobil_sct.c
kobil_sct.h
Makefile
Makefile-keyspan_pda_fw
mct_u232.c
mct_u232.h
metro-usb.c
mos7720.c	USB: serial: mos7720: fix mos_parport refcount imbalance on error path	2019-03-20 13:58:42 +01:00
mos7840.c	USB: serial: mos7840: remove set but not used variables 'number, serial'	2018-12-10 10:20:44 +01:00
mxuport.c
navman.c
omninet.c
opticon.c
option.c	USB: serial: option: add Olicard 600	2019-03-28 09:27:22 +01:00
oti6858.c
oti6858.h
pl2303.c	USB: serial: pl2303: add new PID to support PL2303TB	2019-01-17 17:24:39 +01:00
pl2303.h	USB: serial: pl2303: add new PID to support PL2303TB	2019-01-17 17:24:39 +01:00
qcaux.c
qcserial.c
quatech2.c	USB: serial: quatech2: remove set but not used variable 'port_priv'	2018-11-12 10:08:10 +01:00
safe_serial.c
sierra.c
spcp8x5.c
ssu100.c	ssu100: switch to ->get_serial()	2018-10-13 00:50:41 -04:00
symbolserial.c
ti_usb_3410_5052.c	Merge branch 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs	2018-10-24 14:43:41 +01:00
upd78f0730.c
usb_debug.c
usb_wwan.c	usb_wwan: switch to ->[sg]et_serial()	2018-10-13 00:50:42 -04:00
usb-serial-simple.c	USB: serial: simple: add Motorola Tetra TPG2200 device id	2019-01-07 16:37:52 +01:00
usb-serial.c	complete ->[sg]et_serial() switchover	2018-10-13 00:50:43 -04:00
usb-wwan.h	usb_wwan: switch to ->[sg]et_serial()	2018-10-13 00:50:42 -04:00
visor.c
visor.h
whiteheat.c	whiteheat: switch to ->get_serial()	2018-10-13 00:50:42 -04:00
whiteheat.h
wishbone-serial.c
xsens_mt.c