kernel_optimize_test/arch/arm/mach-ixp4xx
Rod Whitby 7e36e2f535 [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board
The Freecom-FSG3 is a small network-attached-storage device with the
following feature set:

* Intel IXP422
* 4MB Flash (ixp4xx flash driver)
* 64MB RAM
* 4 USB 2.0 host ports (ehci and ohci drivers)
* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
  * Supported by the open source ixp4xx ethernet driver
* Via VT6421 disk controller (libata and sata-via drivers)
  * Internal hard disk (PATA supported, SATA not yet supported)
  * External SATA port (not yet supported)
* ISL1208 RTC chip
* Winbond 83782 temp sensor and fan controller
* MiniPCI slot

The ixp4xx_defconfig is also updated to support this device (the
leds-fsg driver is to be submitted separately via the leds tree after
this initial support is merged, as it depends on header gpio defines).

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 10:03:59 +01:00
..
avila-pci.c
avila-setup.c ixp4xx-i2c-gpio 2008-01-27 18:14:46 +01:00
common-pci.c [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
common.c [ARM] 4694/1: IXP4xx: Update clockevent support for shutdown and resume 2007-12-17 17:18:01 +00:00
coyote-pci.c
coyote-setup.c
dsmg600-pci.c
dsmg600-setup.c leds: Standardise LED naming scheme 2008-02-07 09:47:00 +00:00
fsg-pci.c [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board 2008-04-04 10:03:59 +01:00
fsg-setup.c [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board 2008-04-04 10:03:59 +01:00
gateway7001-pci.c [ARM] If linux/irq.h is included, asm/irq.h is not required 2007-07-12 11:12:18 +01:00
gateway7001-setup.c [ARM] 4425/2: Gateway 7001 series support 2007-07-12 11:12:15 +01:00
gtwx5715-pci.c [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
gtwx5715-setup.c
ixdp425-pci.c
ixdp425-setup.c [ARM] 4715/2: Ethernet support for IXDP425 boards 2008-02-04 13:15:25 +00:00
ixdpg425-pci.c
ixp4xx_npe.c [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features 2008-02-04 13:15:25 +00:00
ixp4xx_qmgr.c [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features 2008-02-04 13:15:25 +00:00
Kconfig [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board 2008-04-04 10:03:59 +01:00
Makefile [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board 2008-04-04 10:03:59 +01:00
Makefile.boot
nas100d-pci.c
nas100d-setup.c leds: Standardise LED naming scheme 2008-02-07 09:47:00 +00:00
nslu2-pci.c
nslu2-setup.c leds: Standardise LED naming scheme 2008-02-07 09:47:00 +00:00
wg302v2-pci.c [ARM] If linux/irq.h is included, asm/irq.h is not required 2007-07-12 11:12:18 +01:00
wg302v2-setup.c [ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support 2007-07-12 11:12:15 +01:00