kernel_optimize_test/arch/arm64/kernel/vmlinux.lds.S
Ard Biesheuvel 06f75a1f62 ARM, arm64: kvm: get rid of the bounce page
The HYP init bounce page is a runtime construct that ensures that the
HYP init code does not cross a page boundary. However, this is something
we can do perfectly well at build time, by aligning the code appropriately.

For arm64, we just align to 4 KB, and enforce that the code size is less
than 4 KB, regardless of the chosen page size.

For ARM, the whole code is less than 256 bytes, so we tweak the linker
script to align at a power of 2 upper bound of the code size

Note that this also fixes a benign off-by-one error in the original bounce
page code, where a bounce page would be allocated unnecessarily if the code
was exactly 1 page in size.

On ARM, it also fixes an issue with very large kernels reported by Arnd
Bergmann, where stub sections with linker emitted veneers could erroneously
trigger the size/alignment ASSERT() in the linker script.

Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-19 19:21:56 +00:00

180 lines
3.8 KiB
ArmAsm

/*
* ld script to make ARM Linux kernel
* taken from the i386 version by Russell King
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*/
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include "image.h"
/* .exit.text needed in case of alternative patching */
#define ARM_EXIT_KEEP(x) x
#define ARM_EXIT_DISCARD(x)
OUTPUT_ARCH(aarch64)
ENTRY(_text)
jiffies = jiffies_64;
#define HYPERVISOR_TEXT \
/* \
* Align to 4 KB so that \
* a) the HYP vector table is at its minimum \
* alignment of 2048 bytes \
* b) the HYP init code will not cross a page \
* boundary if its size does not exceed \
* 4 KB (see related ASSERT() below) \
*/ \
. = ALIGN(SZ_4K); \
VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \
*(.hyp.idmap.text) \
VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; \
VMLINUX_SYMBOL(__hyp_text_start) = .; \
*(.hyp.text) \
VMLINUX_SYMBOL(__hyp_text_end) = .;
/*
* The size of the PE/COFF section that covers the kernel image, which
* runs from stext to _edata, must be a round multiple of the PE/COFF
* FileAlignment, which we set to its minimum value of 0x200. 'stext'
* itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
* boundary should be sufficient.
*/
PECOFF_FILE_ALIGNMENT = 0x200;
#ifdef CONFIG_EFI
#define PECOFF_EDATA_PADDING \
.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
#else
#define PECOFF_EDATA_PADDING
#endif
#ifdef CONFIG_DEBUG_ALIGN_RODATA
#define ALIGN_DEBUG_RO . = ALIGN(1<<SECTION_SHIFT);
#define ALIGN_DEBUG_RO_MIN(min) ALIGN_DEBUG_RO
#else
#define ALIGN_DEBUG_RO
#define ALIGN_DEBUG_RO_MIN(min) . = ALIGN(min);
#endif
SECTIONS
{
/*
* XXX: The linker does not define how output sections are
* assigned to input sections when there are multiple statements
* matching the same input section name. There is no documented
* order of matching.
*/
/DISCARD/ : {
ARM_EXIT_DISCARD(EXIT_TEXT)
ARM_EXIT_DISCARD(EXIT_DATA)
EXIT_CALL
*(.discard)
*(.discard.*)
}
. = PAGE_OFFSET + TEXT_OFFSET;
.head.text : {
_text = .;
HEAD_TEXT
}
ALIGN_DEBUG_RO
.text : { /* Real text segment */
_stext = .; /* Text and read-only data */
__exception_text_start = .;
*(.exception.text)
__exception_text_end = .;
IRQENTRY_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
HYPERVISOR_TEXT
*(.fixup)
*(.gnu.warning)
. = ALIGN(16);
*(.got) /* Global offset table */
}
ALIGN_DEBUG_RO
RO_DATA(PAGE_SIZE)
EXCEPTION_TABLE(8)
NOTES
ALIGN_DEBUG_RO
_etext = .; /* End of text and rodata section */
ALIGN_DEBUG_RO_MIN(PAGE_SIZE)
__init_begin = .;
INIT_TEXT_SECTION(8)
.exit.text : {
ARM_EXIT_KEEP(EXIT_TEXT)
}
ALIGN_DEBUG_RO_MIN(16)
.init.data : {
INIT_DATA
INIT_SETUP(16)
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL
INIT_RAM_FS
}
.exit.data : {
ARM_EXIT_KEEP(EXIT_DATA)
}
PERCPU_SECTION(64)
. = ALIGN(PAGE_SIZE);
__init_end = .;
. = ALIGN(4);
.altinstructions : {
__alt_instructions = .;
*(.altinstructions)
__alt_instructions_end = .;
}
.altinstr_replacement : {
*(.altinstr_replacement)
}
. = ALIGN(PAGE_SIZE);
_data = .;
_sdata = .;
RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
PECOFF_EDATA_PADDING
_edata = .;
BSS_SECTION(0, 0, 0)
. = ALIGN(PAGE_SIZE);
idmap_pg_dir = .;
. += IDMAP_DIR_SIZE;
swapper_pg_dir = .;
. += SWAPPER_DIR_SIZE;
_end = .;
STABS_DEBUG
HEAD_SYMBOLS
}
/*
* The HYP init code can't be more than a page long,
* and should not cross a page boundary.
*/
ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
"HYP init code too big or misaligned")
/*
* If padding is applied before .head.text, virt<->phys conversions will fail.
*/
ASSERT(_text == (PAGE_OFFSET + TEXT_OFFSET), "HEAD is misaligned")