forked from luck/tmp_suning_uos_patched
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
136 lines
3.5 KiB
C
136 lines
3.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* IIO driver for the Measurement Computing CIO-DAC
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This driver supports the following Measurement Computing devices: CIO-DAC16,
|
|
* CIO-DAC06, and PC104-DAC06.
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/types.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
|
|
#define CIO_DAC_NUM_CHAN 16
|
|
|
|
#define CIO_DAC_CHAN(chan) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.channel = chan, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.indexed = 1, \
|
|
.output = 1 \
|
|
}
|
|
|
|
#define CIO_DAC_EXTENT 32
|
|
|
|
static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)];
|
|
static unsigned int num_cio_dac;
|
|
module_param_hw_array(base, uint, ioport, &num_cio_dac, 0);
|
|
MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
|
|
|
|
/**
|
|
* struct cio_dac_iio - IIO device private data structure
|
|
* @chan_out_states: channels' output states
|
|
* @base: base port address of the IIO device
|
|
*/
|
|
struct cio_dac_iio {
|
|
int chan_out_states[CIO_DAC_NUM_CHAN];
|
|
unsigned int base;
|
|
};
|
|
|
|
static int cio_dac_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
|
|
{
|
|
struct cio_dac_iio *const priv = iio_priv(indio_dev);
|
|
|
|
if (mask != IIO_CHAN_INFO_RAW)
|
|
return -EINVAL;
|
|
|
|
*val = priv->chan_out_states[chan->channel];
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int cio_dac_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
struct cio_dac_iio *const priv = iio_priv(indio_dev);
|
|
const unsigned int chan_addr_offset = 2 * chan->channel;
|
|
|
|
if (mask != IIO_CHAN_INFO_RAW)
|
|
return -EINVAL;
|
|
|
|
/* DAC can only accept up to a 16-bit value */
|
|
if ((unsigned int)val > 65535)
|
|
return -EINVAL;
|
|
|
|
priv->chan_out_states[chan->channel] = val;
|
|
outw(val, priv->base + chan_addr_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info cio_dac_info = {
|
|
.read_raw = cio_dac_read_raw,
|
|
.write_raw = cio_dac_write_raw
|
|
};
|
|
|
|
static const struct iio_chan_spec cio_dac_channels[CIO_DAC_NUM_CHAN] = {
|
|
CIO_DAC_CHAN(0), CIO_DAC_CHAN(1), CIO_DAC_CHAN(2), CIO_DAC_CHAN(3),
|
|
CIO_DAC_CHAN(4), CIO_DAC_CHAN(5), CIO_DAC_CHAN(6), CIO_DAC_CHAN(7),
|
|
CIO_DAC_CHAN(8), CIO_DAC_CHAN(9), CIO_DAC_CHAN(10), CIO_DAC_CHAN(11),
|
|
CIO_DAC_CHAN(12), CIO_DAC_CHAN(13), CIO_DAC_CHAN(14), CIO_DAC_CHAN(15)
|
|
};
|
|
|
|
static int cio_dac_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct cio_dac_iio *priv;
|
|
unsigned int i;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], CIO_DAC_EXTENT,
|
|
dev_name(dev))) {
|
|
dev_err(dev, "Unable to request port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + CIO_DAC_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
indio_dev->info = &cio_dac_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = cio_dac_channels;
|
|
indio_dev->num_channels = CIO_DAC_NUM_CHAN;
|
|
indio_dev->name = dev_name(dev);
|
|
|
|
priv = iio_priv(indio_dev);
|
|
priv->base = base[id];
|
|
|
|
/* initialize DAC outputs to 0V */
|
|
for (i = 0; i < 32; i += 2)
|
|
outw(0, base[id] + i);
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
|
|
static struct isa_driver cio_dac_driver = {
|
|
.probe = cio_dac_probe,
|
|
.driver = {
|
|
.name = "cio-dac"
|
|
}
|
|
};
|
|
|
|
module_isa_driver(cio_dac_driver, num_cio_dac);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("Measurement Computing CIO-DAC IIO driver");
|
|
MODULE_LICENSE("GPL v2");
|