forked from luck/tmp_suning_uos_patched
32351a28a7
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
682 lines
25 KiB
C
682 lines
25 KiB
C
/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
|
|
*
|
|
* linux/drivers/serial/sh-sci.h
|
|
*
|
|
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
|
|
* Copyright (C) 1999, 2000 Niibe Yutaka
|
|
* Copyright (C) 2000 Greg Banks
|
|
* Copyright (C) 2002, 2003 Paul Mundt
|
|
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
|
|
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
|
|
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
|
|
*/
|
|
#include <linux/serial_core.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(__H8300H__) || defined(__H8300S__)
|
|
#include <asm/gpio.h>
|
|
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
|
|
#include <asm/regs306x.h>
|
|
#endif
|
|
#if defined(CONFIG_H8S2678)
|
|
#include <asm/regs267x.h>
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7708)
|
|
# define SCSPTR 0xffffff7c /* 8 bit */
|
|
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCI_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7709) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7706)
|
|
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
|
|
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
|
|
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCI_AND_SCIF
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
|
|
# define SCIF0 0xA4400000
|
|
# define SCIF2 0xA4410000
|
|
# define SCSMR_Ir 0xA44A0000
|
|
# define IRDA_SCIF SCIF0
|
|
# define SCPCR 0xA4000116
|
|
# define SCPDR 0xA4000136
|
|
|
|
/* Set the clock source,
|
|
* SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
|
|
* SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
|
|
*/
|
|
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_SH_RTS7751R2D)
|
|
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
|
|
# define SCSPTR1 0xffe0001c /* 8 bit SCI */
|
|
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
|
|
0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
|
|
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
|
|
# define SCI_AND_SCIF
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
|
|
# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
|
|
# define SCPCR 0xA4050116 /* 16 bit SCIF */
|
|
# define SCPDR 0xA4050136 /* 16 bit SCIF */
|
|
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
|
|
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
|
|
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
|
|
# define SCPDR 0xA4050138 /* 16 bit SCIF */
|
|
# define SCSPTR2 SCPDR
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
|
|
# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xffe20010 /* 16 bit SCIF */
|
|
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
|
|
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
|
|
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
|
|
# define SCSPTR0 SCPDR0
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
# define PORT_PSCR 0xA405011E
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
|
|
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
|
|
# define SCSPTR1 0xffe00020 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
|
|
# include <asm/hardware.h>
|
|
# define SCIF_BASE_ADDR 0x01030000
|
|
# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
|
|
# define SCIF_PTR2_OFFS 0x0000020
|
|
# define SCIF_LSR2_OFFS 0x0000024
|
|
# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
|
|
# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
|
|
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,
|
|
TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
|
|
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCI_ONLY
|
|
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
|
|
#elif defined(CONFIG_H8S2678)
|
|
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
|
|
# define SCI_ONLY
|
|
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
|
|
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xff924020 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xff925020 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
|
|
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* Overrun error bit */
|
|
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
|
|
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xffec0024 /* 16 bit SCIF */
|
|
# define SCSPTR3 0xffed0024 /* 16 bit SCIF */
|
|
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
|
|
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
|
|
# define SCIF_OPER 0x0001 /* Overrun error bit */
|
|
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
|
|
# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
|
|
# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
|
|
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
|
|
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
|
|
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
|
|
# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
|
|
# define SCIF_ORER 0x0001 /* overrun error bit */
|
|
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
|
|
# define SCIF_ONLY
|
|
#else
|
|
# error CPU subtype not defined
|
|
#endif
|
|
|
|
/* SCSCR */
|
|
#define SCI_CTRL_FLAGS_TIE 0x80 /* all */
|
|
#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
|
|
#define SCI_CTRL_FLAGS_TE 0x20 /* all */
|
|
#define SCI_CTRL_FLAGS_RE 0x10 /* all */
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7785)
|
|
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
|
|
#else
|
|
#define SCI_CTRL_FLAGS_REIE 0
|
|
#endif
|
|
/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
/* SCI_CTRL_FLAGS_CKE1 0x02 * all */
|
|
/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */
|
|
|
|
/* SCxSR SCI */
|
|
#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
|
|
|
|
#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER)
|
|
|
|
/* SCxSR SCIF */
|
|
#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
|
|
#define SCIF_ORER 0x0200
|
|
#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
|
|
#define SCIF_RFDC_MASK 0x007f
|
|
#define SCIF_TXROOM_MAX 64
|
|
#else
|
|
#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
|
|
#define SCIF_RFDC_MASK 0x001f
|
|
#define SCIF_TXROOM_MAX 16
|
|
#endif
|
|
|
|
#if defined(SCI_ONLY)
|
|
# define SCxSR_TEND(port) SCI_TEND
|
|
# define SCxSR_ERRORS(port) SCI_ERRORS
|
|
# define SCxSR_RDxF(port) SCI_RDRF
|
|
# define SCxSR_TDxE(port) SCI_TDRE
|
|
# define SCxSR_ORER(port) SCI_ORER
|
|
# define SCxSR_FER(port) SCI_FER
|
|
# define SCxSR_PER(port) SCI_PER
|
|
# define SCxSR_BRK(port) 0x00
|
|
# define SCxSR_RDxF_CLEAR(port) 0xbc
|
|
# define SCxSR_ERROR_CLEAR(port) 0xc4
|
|
# define SCxSR_TDxE_CLEAR(port) 0x78
|
|
# define SCxSR_BREAK_CLEAR(port) 0xc4
|
|
#elif defined(SCIF_ONLY)
|
|
# define SCxSR_TEND(port) SCIF_TEND
|
|
# define SCxSR_ERRORS(port) SCIF_ERRORS
|
|
# define SCxSR_RDxF(port) SCIF_RDF
|
|
# define SCxSR_TDxE(port) SCIF_TDFE
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
|
|
# define SCxSR_ORER(port) SCIF_ORER
|
|
#else
|
|
# define SCxSR_ORER(port) 0x0000
|
|
#endif
|
|
# define SCxSR_FER(port) SCIF_FER
|
|
# define SCxSR_PER(port) SCIF_PER
|
|
# define SCxSR_BRK(port) SCIF_BRK
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
|
|
# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
|
|
# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
|
|
# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
|
|
# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3)
|
|
#else
|
|
/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */
|
|
# define SCxSR_RDxF_CLEAR(port) 0x00fc
|
|
# define SCxSR_ERROR_CLEAR(port) 0x0073
|
|
# define SCxSR_TDxE_CLEAR(port) 0x00df
|
|
# define SCxSR_BREAK_CLEAR(port) 0x00e3
|
|
#endif
|
|
#else
|
|
# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
|
|
# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
|
|
# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
|
|
# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
|
|
# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
|
|
# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
|
|
# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
|
|
# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
|
|
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
|
|
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
|
|
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
|
|
# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
|
|
#endif
|
|
|
|
/* SCFCR */
|
|
#define SCFCR_RFRST 0x0002
|
|
#define SCFCR_TFRST 0x0004
|
|
#define SCFCR_TCRST 0x4000
|
|
#define SCFCR_MCE 0x0008
|
|
|
|
#define SCI_MAJOR 204
|
|
#define SCI_MINOR_START 8
|
|
|
|
/* Generic serial flags */
|
|
#define SCI_RX_THROTTLE 0x0000001
|
|
|
|
#define SCI_MAGIC 0xbabeface
|
|
|
|
/*
|
|
* Events are used to schedule things to happen at timer-interrupt
|
|
* time, instead of at rs interrupt time.
|
|
*/
|
|
#define SCI_EVENT_WRITE_WAKEUP 0
|
|
|
|
#define SCI_IN(size, offset) \
|
|
unsigned int addr = port->mapbase + (offset); \
|
|
if ((size) == 8) { \
|
|
return ctrl_inb(addr); \
|
|
} else { \
|
|
return ctrl_inw(addr); \
|
|
}
|
|
#define SCI_OUT(size, offset, value) \
|
|
unsigned int addr = port->mapbase + (offset); \
|
|
if ((size) == 8) { \
|
|
ctrl_outb(value, addr); \
|
|
} else { \
|
|
ctrl_outw(value, addr); \
|
|
}
|
|
|
|
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
|
|
static inline unsigned int sci_##name##_in(struct uart_port *port) \
|
|
{ \
|
|
if (port->type == PORT_SCI) { \
|
|
SCI_IN(sci_size, sci_offset) \
|
|
} else { \
|
|
SCI_IN(scif_size, scif_offset); \
|
|
} \
|
|
} \
|
|
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
|
|
{ \
|
|
if (port->type == PORT_SCI) { \
|
|
SCI_OUT(sci_size, sci_offset, value) \
|
|
} else { \
|
|
SCI_OUT(scif_size, scif_offset, value); \
|
|
} \
|
|
}
|
|
|
|
#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
|
|
static inline unsigned int sci_##name##_in(struct uart_port *port) \
|
|
{ \
|
|
SCI_IN(scif_size, scif_offset); \
|
|
} \
|
|
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
|
|
{ \
|
|
SCI_OUT(scif_size, scif_offset, value); \
|
|
}
|
|
|
|
#define CPU_SCI_FNS(name, sci_offset, sci_size) \
|
|
static inline unsigned int sci_##name##_in(struct uart_port* port) \
|
|
{ \
|
|
SCI_IN(sci_size, sci_offset); \
|
|
} \
|
|
static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \
|
|
{ \
|
|
SCI_OUT(sci_size, sci_offset, value); \
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_SH3
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7705) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7710)
|
|
#define SCIF_FNS(name, scif_offset, scif_size) \
|
|
CPU_SCIF_FNS(name, scif_offset, scif_size)
|
|
#else
|
|
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
|
|
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
|
|
h8_sci_offset, h8_sci_size) \
|
|
CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size)
|
|
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
|
|
CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size)
|
|
#endif
|
|
#elif defined(__H8300H__) || defined(__H8300S__)
|
|
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
|
|
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
|
|
h8_sci_offset, h8_sci_size) \
|
|
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
|
|
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
|
|
#else
|
|
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
|
|
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
|
|
h8_sci_offset, h8_sci_size) \
|
|
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
|
|
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
|
|
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7705) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7710)
|
|
SCIF_FNS(SCSMR, 0x00, 16)
|
|
SCIF_FNS(SCBRR, 0x04, 8)
|
|
SCIF_FNS(SCSCR, 0x08, 16)
|
|
SCIF_FNS(SCTDSR, 0x0c, 8)
|
|
SCIF_FNS(SCFER, 0x10, 16)
|
|
SCIF_FNS(SCxSR, 0x14, 16)
|
|
SCIF_FNS(SCFCR, 0x18, 16)
|
|
SCIF_FNS(SCFDR, 0x1c, 16)
|
|
SCIF_FNS(SCxTDR, 0x20, 8)
|
|
SCIF_FNS(SCxRDR, 0x24, 8)
|
|
SCIF_FNS(SCLSR, 0x24, 16)
|
|
#else
|
|
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
|
|
/* name off sz off sz off sz off sz off sz*/
|
|
SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8)
|
|
SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8)
|
|
SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8)
|
|
SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8)
|
|
SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8)
|
|
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
|
|
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7785)
|
|
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
|
|
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
|
|
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
|
|
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
|
|
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
|
|
#else
|
|
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
|
|
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
|
|
SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
|
|
#endif
|
|
#endif
|
|
#define sci_in(port, reg) sci_##reg##_in(port)
|
|
#define sci_out(port, reg, value) sci_##reg##_out(port, value)
|
|
|
|
/* H8/300 series SCI pins assignment */
|
|
#if defined(__H8300H__) || defined(__H8300S__)
|
|
static const struct __attribute__((packed)) {
|
|
int port; /* GPIO port no */
|
|
unsigned short rx,tx; /* GPIO bit no */
|
|
} h8300_sci_pins[] = {
|
|
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
|
|
{ /* SCI0 */
|
|
.port = H8300_GPIO_P9,
|
|
.rx = H8300_GPIO_B2,
|
|
.tx = H8300_GPIO_B0,
|
|
},
|
|
{ /* SCI1 */
|
|
.port = H8300_GPIO_P9,
|
|
.rx = H8300_GPIO_B3,
|
|
.tx = H8300_GPIO_B1,
|
|
},
|
|
{ /* SCI2 */
|
|
.port = H8300_GPIO_PB,
|
|
.rx = H8300_GPIO_B7,
|
|
.tx = H8300_GPIO_B6,
|
|
}
|
|
#elif defined(CONFIG_H8S2678)
|
|
{ /* SCI0 */
|
|
.port = H8300_GPIO_P3,
|
|
.rx = H8300_GPIO_B2,
|
|
.tx = H8300_GPIO_B0,
|
|
},
|
|
{ /* SCI1 */
|
|
.port = H8300_GPIO_P3,
|
|
.rx = H8300_GPIO_B3,
|
|
.tx = H8300_GPIO_B1,
|
|
},
|
|
{ /* SCI2 */
|
|
.port = H8300_GPIO_P5,
|
|
.rx = H8300_GPIO_B1,
|
|
.tx = H8300_GPIO_B0,
|
|
}
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7708)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xfffffe80)
|
|
return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7709) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7706)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xfffffe80)
|
|
return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */
|
|
if (port->mapbase == 0xa4000150)
|
|
return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xa4000140)
|
|
return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == SCIF0)
|
|
return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
|
|
if (port->mapbase == SCIF2)
|
|
return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == SCSPTR0)
|
|
return ctrl_inw(SCSPTR0 + 0x10) & 0x01 ? 1 : 0;
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH4_202)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
#ifndef SCIF_ONLY
|
|
if (port->mapbase == 0xffe00000)
|
|
return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
|
|
#endif
|
|
#ifndef SCI_ONLY
|
|
if (port->mapbase == 0xffe80000)
|
|
return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
|
|
#endif
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xfe600000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xfe610000)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xfe620000)
|
|
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xa4430000)
|
|
return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffe00000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffe10000)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffe20000)
|
|
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffe30000)
|
|
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffe00000)
|
|
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffe00000)
|
|
return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */
|
|
else
|
|
return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
|
|
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
|
|
}
|
|
#elif defined(__H8300H__) || defined(__H8300S__)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
int ch = (port->mapbase - SMR0) >> 3;
|
|
return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xff923000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xff924000)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xff925000)
|
|
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffe00000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffe10000)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xffea0000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffeb0000)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffec0000)
|
|
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffed0000)
|
|
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffee0000)
|
|
return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xffef0000)
|
|
return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xfffe8000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xfffe8800)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xfffe9000)
|
|
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xfffe9800)
|
|
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
|
|
static inline int sci_rxd_in(struct uart_port *port)
|
|
{
|
|
if (port->mapbase == 0xf8400000)
|
|
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xf8410000)
|
|
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
|
|
if (port->mapbase == 0xf8420000)
|
|
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Values for the BitRate Register (SCBRR)
|
|
*
|
|
* The values are actually divisors for a frequency which can
|
|
* be internal to the SH3 (14.7456MHz) or derived from an external
|
|
* clock source. This driver assumes the internal clock is used;
|
|
* to support using an external clock source, config options or
|
|
* possibly command-line options would need to be added.
|
|
*
|
|
* Also, to support speeds below 2400 (why?) the lower 2 bits of
|
|
* the SCSMR register would also need to be set to non-zero values.
|
|
*
|
|
* -- Greg Banks 27Feb2000
|
|
*
|
|
* Answer: The SCBRR register is only eight bits, and the value in
|
|
* it gets larger with lower baud rates. At around 2400 (depending on
|
|
* the peripherial module clock) you run out of bits. However the
|
|
* lower two bits of SCSMR allow the module clock to be divided down,
|
|
* scaling the value which is needed in SCBRR.
|
|
*
|
|
* -- Stuart Menefy - 23 May 2000
|
|
*
|
|
* I meant, why would anyone bother with bitrates below 2400.
|
|
*
|
|
* -- Greg Banks - 7Jul2000
|
|
*
|
|
* You "speedist"! How will I use my 110bps ASR-33 teletype with paper
|
|
* tape reader as a console!
|
|
*
|
|
* -- Mitch Davis - 15 Jul 2000
|
|
*/
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7785)
|
|
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
|
|
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
|
|
#elif defined(__H8300H__) || defined(__H8300S__)
|
|
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
|
|
#elif defined(CONFIG_SUPERH64)
|
|
#define SCBRR_VALUE(bps) ((current_cpu_data.module_clock+16*bps)/(32*bps)-1)
|
|
#else /* Generic SH */
|
|
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
|
|
#endif
|