forked from luck/tmp_suning_uos_patched
84314fd474
This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
198 lines
7.7 KiB
Makefile
198 lines
7.7 KiB
Makefile
#
|
|
# Makefile for linux/drivers/scsi
|
|
#
|
|
# 30 May 2000, Christoph Hellwig <hch@infradead.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
|
|
# Changed link order to reflect new scsi initialization.
|
|
#
|
|
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
|
|
# The link order must be, SCSI Core, SCSI HBA drivers, and
|
|
# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
|
|
# satisfy certain initialization assumptions in the SCSI layer.
|
|
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
|
|
|
|
|
|
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
|
|
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
|
|
CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
|
|
|
|
subdir-$(CONFIG_PCMCIA) += pcmcia
|
|
|
|
obj-$(CONFIG_SCSI) += scsi_mod.o
|
|
|
|
obj-$(CONFIG_RAID_ATTRS) += raid_class.o
|
|
|
|
# --- NOTE ORDERING HERE ---
|
|
# For kernel non-modular link, transport attributes need to
|
|
# be initialised before drivers
|
|
# --------------------------
|
|
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
|
|
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
|
|
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
|
|
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
|
|
obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
|
|
|
|
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o
|
|
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
|
|
obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
|
|
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
|
|
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
|
|
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
|
|
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
|
|
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
|
|
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
|
|
obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o
|
|
obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o
|
|
obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o
|
|
obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o
|
|
obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp_mod.o
|
|
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
|
|
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
|
|
obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
|
|
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
|
|
obj-$(CONFIG_MVME16x_SCSI) += mvme16x.o 53c7xx.o
|
|
obj-$(CONFIG_BVME6000_SCSI) += bvme6000.o 53c7xx.o
|
|
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
|
|
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
|
|
obj-$(CONFIG_SCSI_PSI240I) += psi240i.o
|
|
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
|
|
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
|
|
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
|
|
obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/
|
|
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
|
|
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
|
|
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
|
|
obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
|
|
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
|
|
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
|
|
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
|
|
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
|
|
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
|
|
obj-$(CONFIG_SCSI_IPS) += ips.o
|
|
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
|
|
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
|
|
obj-$(CONFIG_SCSI_IN2000) += in2000.o
|
|
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
|
|
obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
|
|
obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
|
|
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
|
|
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
|
|
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
|
|
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
|
|
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
|
|
obj-$(CONFIG_SCSI_LPFC) += lpfc/
|
|
obj-$(CONFIG_SCSI_PAS16) += pas16.o
|
|
obj-$(CONFIG_SCSI_SEAGATE) += seagate.o
|
|
obj-$(CONFIG_SCSI_FD_8xx) += seagate.o
|
|
obj-$(CONFIG_SCSI_T128) += t128.o
|
|
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
|
|
obj-$(CONFIG_SCSI_DTC3280) += dtc.o
|
|
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
|
|
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
|
|
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
|
|
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
|
|
obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o
|
|
obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o
|
|
obj-$(CONFIG_SCSI_EATA) += eata.o
|
|
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
|
|
obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
|
|
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
|
|
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
|
|
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
|
|
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
|
|
obj-$(CONFIG_SCSI_SUNESP) += esp.o
|
|
obj-$(CONFIG_SCSI_GDTH) += gdth.o
|
|
obj-$(CONFIG_SCSI_INITIO) += initio.o
|
|
obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
|
|
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
|
|
obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o
|
|
obj-$(CONFIG_SCSI_MESH) += mesh.o
|
|
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
|
|
obj-$(CONFIG_SCSI_PLUTO) += pluto.o
|
|
obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o
|
|
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
|
|
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
|
|
obj-$(CONFIG_SCSI_PPA) += ppa.o
|
|
obj-$(CONFIG_SCSI_IMM) += imm.o
|
|
obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o
|
|
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
|
|
obj-$(CONFIG_SCSI_FCAL) += fcal.o
|
|
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
|
|
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
|
|
obj-$(CONFIG_SCSI_IPR) += ipr.o
|
|
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
|
|
obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
|
|
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
|
|
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
|
|
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
|
|
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
|
|
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
|
|
obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
|
|
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
|
|
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
|
|
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
|
|
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
|
|
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
|
|
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
|
|
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
|
|
obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
|
|
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
|
|
obj-$(CONFIG_SCSI_STEX) += stex.o
|
|
|
|
obj-$(CONFIG_ARM) += arm/
|
|
|
|
obj-$(CONFIG_CHR_DEV_ST) += st.o
|
|
obj-$(CONFIG_CHR_DEV_OSST) += osst.o
|
|
obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
|
|
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
|
|
obj-$(CONFIG_CHR_DEV_SG) += sg.o
|
|
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
|
|
|
|
# This goes last, so that "real" scsi devices probe earlier
|
|
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
|
|
|
|
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
|
|
scsicam.o scsi_error.o scsi_lib.o \
|
|
scsi_scan.o scsi_sysfs.o \
|
|
scsi_devinfo.o
|
|
scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
|
|
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
|
|
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
|
|
|
|
sd_mod-objs := sd.o
|
|
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
|
|
ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
|
|
:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
|
|
-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
|
|
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
|
|
zalon7xx-objs := zalon.o ncr53c8xx.o
|
|
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
|
|
libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o
|
|
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
|
|
|
|
# Files generated that shall be removed upon make clean
|
|
clean-files := 53c7xx_d.h 53c700_d.h \
|
|
53c7xx_u.h 53c700_u.h
|
|
|
|
$(obj)/53c7xx.o: $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
|
|
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
|
|
|
|
# If you want to play with the firmware, uncomment
|
|
# GENERATE_FIRMWARE := 1
|
|
|
|
ifdef GENERATE_FIRMWARE
|
|
|
|
$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
|
|
$(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
|
|
|
|
$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
|
|
|
|
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
|
|
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
|
|
|
|
endif
|